• Engine Code: 13 N
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Engine Code: 13 N
• Required quantity: 4
• Quantity per packing unit: 10
• for OE number: 21013707001
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• alternative item: W20TT
• Name: —WIECA ZAPONOWA W20EPR-U
• Manufacturer: DEN

• for OE number: 09482-00299
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• for OE number: 59622A
• Spanner Size: 20
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Engine Code: 13 N
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.7
• Diameter [mm]: 21
• Length [mm]: 73.5
• Weight [kg]: 0.052
• Thread Size: M14 x 1,25
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 0.8
• Thread Size: M14 x 1.25
• Spanner Size: 21
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188704021
• Manufacturer: HELLA

• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Electrode Gap [mm]: 0.7
• Quantity per packing unit: 4
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: V-LINE 2
• Lisainfo: V-LINE 2

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE006/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.061
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Electrode Gap [mm]: 0.7
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Electrode Gap [mm]: 0.7
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Engine Code: 13 N
• Required quantity: 4
• Quantity per packing unit: 4
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• alternative item: IW20
• Manufacturer: DENSO
• Name: DN W20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1,25
• Spanner Size: 21 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Required quantity: 4
• Quantity Unit: Kit
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: 13 N
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• alternative item: IW20TT
• Manufacturer: DENSO
• Name: DN IW20TT
• Quality class: Q

Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Electrode Gap [mm]: 0.7
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat

• Electrode Gap [mm]: 1.1
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 5
• Number of pins: 4
• Manufacturer: BOSCH SWIECE ZAPLONOWE/ZAROWE

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Electrode Gap [mm]: 0.7
• Spanner Size: 20,8 mm
• Thread Size: M14 x 1,25
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode