• Construction Year from: 09.1998
• Construction Year to: 12.2002
• Alternatively:
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: nurga all
• Piirangutega toode/piirangu info 2: koos kaabliga
• Takistus [oom]: 550
• Manufacturer: VALEO
• Name: VA 254089

• Pikkus (mm): 36
• Korpusevärv: must
• Võtmekaugus: 13
• Manufacturer: KAMOKA

• Pikkus (mm): 37
• Keermemõõt: M10x1,0
• Võtmekaugus: 13
• Pistikkontaktide arv: 1
• Manufacturer: DELLO AUTOMEGA

• Pikkus (mm): 50
• Korpusevärv: sinine
• Võtmekaugus: 19
• Manufacturer: KAMOKA

• Keermemõõt: 1/8x27 NPTF
• Manufacturer: FAE

• Pistikkontaktide arv: 1
• Värv: punane
• Keermemõõt: 1/8"x27 NPTF
• Anduritüüp: NTC-andur
• Installatsiooni sügavus (mm): 22
• Võtmekaugus: 13
• OE-numbri jaoks: 3439088
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECT-CH-006
• Manufacturer: NTY

• Engine Code: X 16 XEL
• Keermemõõt: 1/8-27NPT
• Võtmekaugus: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

tootekoodile: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348

• Keermemõõt: 1/8x27 NPTF
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: X 16 XEL
• Keermemõõt: 1/8-27NPT
• Võtmekaugus: 13
• tootekoodile: 7.8288, 7.8343, 7.8344, 7.8346, 7.8348
• Manufacturer: FACET

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ümar
• Pistikkontaktide arv: 1
• Võtmekaugus: 12
• Keermemõõt: 1/8 NPT
• OE-numbri jaoks: 3439088
• Manufacturer: NRF

• Pikkus (mm): 61
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Tootja piirang: BOSCH
• Manufacturer: DELLO AUTOMEGA

Manufacturer: FAST

• Engine Code: X 16 XEL
• Pistikkontaktide arv: 1
• Keermemõõt: 1/8x27NPT
• Kaal (kg): 0,021
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M12x1.5
• Võtmekaugus: 19
• Manufacturer: FAST

Manufacturer: DELLO AUTOMEGA

• Võtmekaugus: 19
• Värv: sinine
• Pistikkontaktide arv: 2
• Keermemõõt: M12x1,5
• Pikkus (mm): 51
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0124
• Additional information: 21-0124

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 195321101000
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: X 16 XEL
• Anduritüüp: NTC-andur
• Keermemõõt: 1/8"-27 NPT
• Võtmekaugus: 13
• Pistikkontaktide arv: 1
• Pöördeliik: koos koonilise keermega
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: X 16 XEL
• Pistikkontaktide arv: 2
• Kõrgus (mm): 51,8
• Kaal (kg): 0,029
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Keermemõõt: M12x1,5
• Korpusevärv: sinine
• Võtmekaugus: 19
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 46462179
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF
• Additional information: 727005 NRF
• Lisainfo: 727005 NRF

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Keermemõõt: M12x1.5
• Võtmekaugus: 19
• Manufacturer: FAST

• Fabrication Number: ECP-PL-003
• Manufacturer: NTY

• Engine Code: X 16 XEL
• Kaablipikkus (mm): 340
• Anduritüüp: passiivne andur
• OE-numbri jaoks: 62 38 459
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 2
• Pistiku värv: sinakas valgus
• Pistikukatte kuju: ovaalne
• Keermemõõt: M 12x1,5
• Võtmekaugus: 19 mm
• OE-numbri jaoks: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT & DORIA

• Construction Year to: 08.2002
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Keermemõõt: M12x1.5
• Manufacturer: VERNET

• Engine Code: X 16 XEL
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• tootekoodile: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Construction Year to: 03.2004
• Korpusevärv: sinine
• Pistikkontaktide arv: 2
• Keermemõõt: M12X1.5-6g
• Võtmekaugus: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Engine Code: X 16 XEL
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• tootekoodile: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Korpusevärv: helesinine
• Pistikkontaktide arv: 2
• Keermemõõt: M 12x1,5
• Manufacturer: FAE

• Pikkus (mm): 50,7
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 11
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värvimarkeering: sinine
• Lülituspunkt [°C]: 20
• Kaal (kg): 0,022
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Korpusevärv: sinine
• Pistikkontaktide arv: 2
• Keermemõõt: M12X1.5-6g
• Võtmekaugus: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Engine Code: X 16 XEL
• Anduritüüp: passiivne andur
• OE-numbri jaoks: 10456604
• Manufacturer: KAMOKA

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 9947855
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Pikkus (mm): 50,7
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 11
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: sinine
• Värvimarkeering: sinine
• Lülituspunkt [°C]: 20
• Kaal (kg): 0,022
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 40 91 7695
• Manufacturer: SWAG
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kasutuspinge [V]: 12
• Anduritüüp: passiivne andur
• Takistus [oom]: 550
• Installatsiooni sügavus (mm): 34,5
• Kaablipikkus (mm): 810
• Pistikkontaktide arv: 3
• Manufacturer: JP GROUP
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Construction Year to: 08.2002
• Kaablipikkus (mm): 835
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Pistikkontaktide arv: 3
• Manufacturer: DELLO AUTOMEGA

• Model Year from: 1999
• Voltage [V]: 12
• Length [mm]: 790
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Engine Code: X 16 XEL
• Montaaživiis: kruvitud
• Pinge [V]: 12
• Takistus [oom]: 2 080, 302
• Piirangutega toode/piirangu info: koos tihendiga
• temperatuurivahemik alates [°C]: 25
• Temperatuurivahemik kuni [°C]: 80
• Keermemõõt: M12x1,5
• Värv: sinine
• Võtmekaugus: 19
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: sinine
• Tootja piirang: Bosch
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PT009107361
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: X 16 XEL
• Anduritüüp: NTC-andur
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Värv: sinine
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 885
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Pinge [V]: 12
• Temperatuurivahemik kuni [°C]: 250
• Takistus [oom]: 5 000
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must
• Pistikute teostus: Lamepistik
• Pistikukatte kuju: ovaalne
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Anduritüüp: Induktiivandur
• Kaablipikkus (mm): 830
• Manufacturer: MEAT&DORIA

• Resistor [Ohm]: 600
• Cable Length [mm]: 820
• Number of pins: 3
• Fitting Depth [mm]: 34
• Manufacturer: ERA

• Pikkus (mm): 87
• Ühenduste arv: 2
• Värv: must, valge
• Kaal (kg): 0,02
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: X 16 XEL
• Resistor [Ohm]: 550
• Colour: black
• Cable Length [mm]: 340
• Number of pins: 3
• Fitting Depth [mm]: 34.5
• Weight [kg]: 0.076
• Manufacturer: ERA

• Engine Code: X 16 XEL
• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 39
• Weight [kg]: 0.03
• Alternative Repair Kit: 550052
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Kaablipikkus (mm): 850
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Engine Code: X 16 XEL
• Resistor [Ohm]: 540
• Colour: black
• Cable Length [mm]: 550
• Number of pins: 3
• Fitting Depth [mm]: 34.5
• Weight [kg]: 0.092
• Manufacturer: ERA

• Engine Code: X 16 XEL
• Voltage [V]: 12
• Length [mm]: 490
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 03.2004
• Engine Code: X 16 XEL
• Kaablipikkus (mm): 580
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
ASTRA F (56/, 57/),
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ASTRA F (56/, 57/),
(kvaliteediklass: PJ)"

• Construction Year from: 09.1998
• Construction Year to: 12.2002
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: nurga all
• Piirangutega toode/piirangu info 2: koos kaabliga
• Takistus [oom]: 550
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Kaal (kg): 0,152
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pinge [V]: 12
• Takistus [oom]: 540
• Tolerants (%): 15
• Kaablipikkus (mm): 885
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: HE 6PU009163791
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Anduritüüp: Induktiivandur
• Kaablipikkus (mm): 861
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Engine Code: X 16 XEL
• Colour: black
• Number of pins: 2
• Fitting Depth [mm]: 39
• Weight [kg]: 0.03
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Engine Code: X 16 XEL
• Number of pins: 3
• Fitting Depth [mm]: 73
• Manufacturer: ERA

• Engine Code: X 16 XEL
• Pikkus (mm): 885
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: X 16 XEL
• Pikkus (mm): 885
• Manufacturer: FACET

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Engine Code: X 16 XEL
• Kaablipikkus (mm): 880
• Tolerants (%): +20, −20
• Pistikkontaktide arv: 3
• Värv: must
• Manufacturer: VDO

• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 885
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Construction Year from: 09.1998
• Construction Year to: 12.2002
• Engine Code: X16XEL
• Piirangutega toode/piirangu info 2: nukkvõlli jaoks, ilma kaablita
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 8,3
• Pistikukatte kuju: ovaalne
• Takistus [koom]: 13,4
• Kaal (kg): 0,019
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.