• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Mounting Type: soft version
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Manufacturer: JP GROUP
• Lisainfo: Bearing for strut, front
• Additional information: Bearing for strut, front

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-PL-011
• Manufacturer: NTY
• Name: NTY AD-PL-011

• Bearing Type: Rolling Bearing
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 12
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 37
• Manufacturer: MAX
• Lisainfo: 72-2957
• Additional information: 72-2957

Name: Laager - K„„ndmik OPEL P. ASTRA G/CORCA C/MERIVA/VECTRA B /ZAFIRA A

• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.047
• Name: Laager,amorditugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 41
• Fitting Position: Front Axle
• Required quantity: 2
• Inner Diameter [mm]: 16
• Name: Laager - K„„ndmik OPEL P. ASTRA F/ VECTRA
• Manufacturer: TED

• Fitting Position: Front Axle, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 165
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: AD-PL-010
• Manufacturer: NTY
• Name: NTY AD-PL-010

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Laager,amorditugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Mounting Type: soft version
• Supplementary Article/Info 2: without bearing
• Outer Diameter [mm]: 113, 103
• Inner Diameter [mm]: 12
• Name: Laager - K„„ndmik. OPEL P. VECTRA B
• Manufacturer: MAX

• Body Type: Van, MPV
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: hard version, Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Section: Upper section
• Supplementary Article/Info 2: without bearing
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.44
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO

• Height [mm]: 40
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 103, 113
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Mounting Type: soft version
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Name: Laager - K„„ndmik. OPEL P. VECTRA B BEZ O½YSKA
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 335
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Front Axle
• for OE number: 344523
• Manufacturer: SASIC

• Fitting Position: Front Axle, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 450
• Manufacturer: GATES PASKI PRZEWODY

• Inner Diameter [mm]: 12
• Height [mm]: 40
• Outer Diameter [mm]: 103, 113
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Mounting Type: soft version
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 40 54 0006

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• for OE number: 0344523
• Fitting Position: Front Axle
• Required quantity: 2
• Mounting Type: soft version
• Weight [g]: 458
• Name: IM 31334
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Section: Lower Section
• Supplementary Article/Info 2: with bearing
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Front Axle, Upper
• Outer Diameter [mm]: 114, 79
• Inner Diameter [mm]: 12
• Name: Laager - K„„ndmik OPEL
• Manufacturer: MAX

• Installatsiooni pool: Esisild
• Kaal (kg): 0,45
• Materjal: Kumm/metall
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 103, 113
• Laagritüüp: pehme teostus
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Manufacturer: METALCAUCHO

• for OE number: 344427
• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [g]: 129
• Component Number: 4
• Name: IM 50360
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 344424
• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [g]: 132
• Component Number: 4
• Name: IM 50551
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without ball bearing
• Mounting Type: hard version
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. OPEL P. VECTRA BEZ O½YSKA
• Manufacturer: MEY

• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos laagriga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 34700 01
• for OE number: 3 44 523, 90468554
• Name: Laager - K„„ndmik. OPEL P. VECTRA B BEZ O½YSKA
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Right, Front Axle
• Width 1 [mm]: 17
• Inner Diameter 1 [mm]: 36
• Outer Diameter 1 [mm]: 12
• Manufacturer: SNR /NTN-SNR/
• Name: SN M253.08

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 802 473
• for OE number: 3 44 523, 90468554
• Name: Laager - K„„ndmik. OPEL P. VECTRA
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Upper
• Supplementary Article/Info 2: with ball bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik OPEL P. ASTRA G, CORSA LE/PR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Weight [kg]: 0.5
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Packaging length [cm]: 13.6
• Packaging width [cm]: 11.8
• Packaging height [cm]: 11.4
• Manufacturer: MONROE

• Quantity per axle: 2
• Fitting Position: Front Axle, both sides
• for OE number: 3 12 510, 90468618
• Name: Laager - K„„ndmik OPEL ASTRA G/CORSA B/V
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Fitting Position: Front Axle, both sides
• for OE number: 3 12 510, 90468618
• Name: Laager - K„„ndmik OPEL A
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Kaal (kg): 0,66
• Piirangutega toode/piirangu info: koos materjaliga
• Kaal (g): 660
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• for OE number: 312510
• Manufacturer: SASIC

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT
• Additional information: D5040
• Lisainfo: D5040

• Fitting Position: Front Axle
• Weight [kg]: 0.4
• Supplementary Article/Info 2: with bearing
• Packaging length [cm]: 18.7
• Packaging width [cm]: 12
• Packaging height [cm]: 11
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.2
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• OE-numbri jaoks: 90468618, 3 12 510
• Installatsiooni pool: esisild mõlemapoolselt
• Piirangutega toode/piirangu info 2: koos laagriga
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
OPEL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
OPEL
(kvaliteediklass: PJ)"

• Construction Year from: 10.2001
• Suspension: for vehicles without bad road version
• Installatsiooni pool: Esisild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• for OE number: 90468618
• Fitting Position: Front Axle
• Weight [g]: 857
• Component Number: 2
• Name: IM 31446
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Mounting Type: soft version
• Weight [kg]: 0.752
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. OPEL P. VECTRA B 1,6-2,0/CORSA KPL Z O½YSKIEM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Mounting Type: Rubber-Metal Mount
• Quantity Unit: Set
• Name:
• Manufacturer: MEY
• Lisainfo: 6146411007
• Additional information: 6146411007

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB653.12

• Fitting Position: Front Axle
• Mounting Type: soft version
• Weight [kg]: 0.752
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: SWAG
• Name: SW 40 92 6934

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2001
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Manufacturer: KYB

Technical Information: Suspension mounting + separated suspension bearing, rubber ring (x1) Name: Laager - K„„ndmik. OPEL P. ASTRA G, CORSA C, TIGRA, VECTRA B 1.0-2.2 10.95-12.09 LE/PR

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. OPEL P. VECTRA B 1,6-2,0/CORSA KPL Z O½YSKIEM

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!