• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 298
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

• Vehicle Identification Number (VIN) from: 41048790, 48045598
• Fitting Position: Front
• Length [mm]: 287
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fabrication Number: ECT-CH-006

• Vehicle Identification Number (VIN) to: 41048790, 48045598
• Fitting Position: Front Axle Left
• Length [mm]: 680
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Material: Plastic
• for OE number: 90346055
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0340
• Additional information: 21-0340

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• External Thread [mm]: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1342567, 6238422, 90542063
• Manufacturer: MEAT&DORIA

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 685
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Name: CE 17SKV701
• Manufacturer: ESEN SKV

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• External Thread [mm]: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT&DORIA

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207019
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Fitting Position: Rear, Front
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Voltage [V]: 12
• Socket colour: black
• Fabrication Number: EPDC-PL-001
• Manufacturer: NTY
• Name: NTY EPDC-PL-001

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• not for trim level: 4mm
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Passive sensor
• for OE number: 6602998
• Manufacturer: KAMOKA

• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Fitting Position: both sides, Rear
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: Ultrasonic Sensor
• Fabrication Number: EPDC-PL-002
• Manufacturer: NTY

• Engine Code: Z 20 NET
• Manufacturer Restriction: BOSCH
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Lisainfo: Water level sensor for washertank
• Additional information: Water level sensor for washertank

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• Height [mm]: 25.5
• Width [mm]: 29
• for OE number: 1236284, 9152245
• Manufacturer: MEAT&DORIA

• Number of connectors: 2
• Weight [kg]: 0.01
• Manufacturer: SWAG
• Name: SW 99 90 1840

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 20 NET
• Manufacturer Restriction: BOSCH
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Fabrication Number: ECP-PL-038
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: Passive sensor
• for OE number: 71739685
• Manufacturer: KAMOKA

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Name: Andur, v„ntvoll
• Manufacturer: MAG

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009169081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: BOSCH

• Supplementary Article/Info 2: without cable
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Supplementary Article/Info 2: with service lamp
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP064

• Length [mm]: 87
• Number of connectors: 2
• Colour: black, white
• Weight [kg]: 0.02
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP065
• Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 890
• Fitting Depth [mm]: 35
• for OE number: 12789959, 71739685
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 28SKV068
• Lisainfo: 28SKV068 SKV
• Additional information: 28SKV068 SKV

• Fabrication Number: HCA-PL-003
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Fitting Position: Front, Rear, both sides
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• for article number: KLP-PL-014
• Fabrication Number: HCA-PL-002
• Manufacturer: NTY

• Fitting Position: Front, Rear
• for OE number: 62 38 242
• Length [mm]: 34
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Chemical Properties: Paintable
• Number of pins: 3
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• for OE number: 62 38 242
• Length [mm]: 34
• Length from [mm]: 34
• Width [mm]: 37
• Height [mm]: 47
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. OPEL VECTRA C 03-
• Manufacturer: BRM

• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Fitting Position: Front, Rear
• Colour: black
• Number of pins: 3
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.12
• Manufacturer: VALEO
• Name: VA 254028

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: both sides, Front, Rear
• Quantity: 8
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Cable Length [mm]: 195
• Number of pins: 3
• Supplementary Article/Info 2: for crankshaft
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: rectangular
• Weight [kg]: 0.048
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: silver
• Number of pins: 4
• Connector Shape: oval
• Housing Colour: blue
• for OE number: 9198958
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Engine Code: Z 20 NET
• Number of pins: 4
• Colour: black
• Weight [kg]: 0.043
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• for OE number: 93172012
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• Number of pins: 4
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: silver
• Shape: Cylindrical
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141571
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: Manual Transmission
• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 230,000
• Voltage from [V]: 0.4
• Voltage to [V]: 4.625
• Number of pins: 4
• Manufacturer: METZGER

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 41039264
• Cable Length [mm]: 365
• Manufacturer: DELPHI

• Fitting Position: Front, Rear
• Manufacturer: METZGER

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Metal
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Fabrication Number: EPP-PL-014
• Manufacturer: NTY

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Colour: Aluminium
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Vehicle Identification Number (VIN) from: 41039264, 48034285, 51065674
• Block Separation:
• Vehicle Identification Number (VIN) to: 51065673
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Heated
• Length [mm]: 500
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Vehicle Identification Number (VIN) to: 51065673
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2003
• Construction Year to: 10.2005
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Vehicle Identification Number (VIN) to: 41039263->48034284
• Engine Code: Z 20 NET
• Cable Length [mm]: 400
• Manufacturer: DELPHI

• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX