• Vehicle Identification Number (VIN) from: 54064147, 58, 51066207
• Special Purpose Vehicle: not for police vehicles, for police vehicles
• Block Separation:
• Fitting Position: Front Axle
• Brake System: Teves
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

Suspension: for vehicles without sports suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.02

Lisainfo: QB11667K

• Fitting Position: Front Axle
• Length [mm]: 19
• Thread Size: M10x1,25
• Thread Type: with external thread
• Spanner Size: Hex-5
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M10x1,25 19,0mm Hex-5 2tk
• Additional information: M10x1,25 19,0mm Hex-5 2tk

Lisainfo: Sensor, brake lining wear

• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT,PIDURISADUL
• Manufacturer: MAX
• Lisainfo: 27-0553
• Additional information: 27-0553

• Fitting Position: Front Axle
• Brake System: ATE, dos piezas
• Name: LISAKOMPLEKT,PIDURISADUL
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 16
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1755
• Lisainfo: QB109-1755

• Fitting Position: Rear
• Weight [kg]: 0.015
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Brake System: ATE
• Spring Design: Wire Spring
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Fabrication Number: HCZ-PL-001
• Manufacturer: NTY

• Fitting Position: Front
• Length [mm]: 159
• Weight [kg]: 0.015
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT
• Additional information: D42344A AUT
• Lisainfo: D42344A AUT

• Required quantity: 1
• Fitting Position: Front Axle
• Construction Year from: 09.2004
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Thread Size: M6 x 1 x 16 mm
• Required quantity: 2
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Length [mm]: 16.1
• Thread Size: M6x1
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Female Torx
• Available as universal article as well, see article no.: TPM1000
• Weight [kg]: 0.003
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Vehicle Identification Number (VIN) from: 41048790
• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 300
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 16
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: ATE
• Length [mm]: 300
• Number of wear indicators [per axle]: 1
• Net weight [kg]: 0.02
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: NK

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.02
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Length [mm]: 19
• Thread Size: M10x1,25
• Thread Type: with external thread
• Spanner Size: Hex-5
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 41048790
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 290
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer Restriction: ATE
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Connector type: +CDC plug
• Length [mm]: 300
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0255A

• Vehicle Identification Number (VIN) from: 41048791
• Fitting Position: Front Axle
• Length [mm]: 287
• Warning Contact Length [mm]: 298
• Brake Type: Disc Brake
• Weight [kg]: 0.008
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 51066207, 58, 54064147
• Special Purpose Vehicle: for police vehicles, not for police vehicles
• Block Separation:
• Fitting Position: Front Axle
• Brake System: Teves
• Weight [kg]: 0.03
• Manufacturer: TOMEX BRAKES

Suspension: for vehicles with sports suspension, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: ERT
• Lisainfo: 420009 ERT
• Additional information: 420009 ERT

• Version: With Susp Pack Sport, Without SusPck Sport
• Fitting Position: Front Axle, Rear Axle
• Brake System: Motorcraft, TRW, ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901755

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with manual transmission
• Suspension: for vehicles with standard suspension
• Braking/Drive Dynamics: for vehicles with ESP
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Fitting Position: Front Axle
• Rim Hole Number: 3
• Brake System: ATE
• Version: Flat spring
• Weight [kg]: 0.09

• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Fabrication Number: HCZ-PL-002
• Manufacturer: NTY

• Required quantity: 1
• Fitting Position: Front Axle
• Construction Year to: 08.2004
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Connector type: -CDC plug
• Length [mm]: 680
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: Ate
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake System: Ate
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Spring Design: Wire Spring
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 41048789
• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 680
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX
• Lisainfo: 23-0008
• Additional information: 23-0008

• Fitting Position: Front Axle
• Brake System: ATE
• Connector type: +CDC plug
• Length 1 [mm]: 300
• Brake Type: Disc Brake
• Name: DE LZ0188
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
SIGNUM, 05.03-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
SIGNUM, 05.03-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: ATE
• Spring Design: Plate Spring
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Thread Size: M10 x 1,25 x 19
• Bolt Head-/Nut Design: Female Torx
• Observe the vehicle manufacturer specifications:
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 41048790
• Length [mm]: 300
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2613A

• Fitting Position: Front Axle
• Suspension: for vehicles with electronic suspension control
• Brake Type: Disc Brake
• Length [mm]: 300
• Manufacturer Restriction: ATE
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: 41048790
• Length [mm]: 300
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: SWAG
• Name: SW 40 92 7183

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.02
• Spring Design: Wire Spring
• Manufacturer: A.B.S.

• Brake System: ATE
• Name: Vedru, Pidurisadul
• Manufacturer: ATE
• Lisainfo: 11.8116-0356.1
• Additional information: 11.8116-0356.1

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 298
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 41048791
• Brake Type: Disc Brake
• Length [mm]: 300
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.012
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Weight [kg]: 0.03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• Connector type: -CDC plug
• Length 1 [mm]: 680
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0166
• Quality class: PJ

Additional information: "Tootja: DELPHI
VECTRA C, 04.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C, 04.02-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901639

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 41048790
• Brake Type: Disc Brake
• Length [mm]: 695
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.026
• Manufacturer: MINTEX

• Length [mm]: 680
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with electronic suspension control
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 300
• Brake System: ATE
• Weight [kg]: 0.013
• Warning Contact Length [mm]: 300
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) to: 41048789
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 685
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer Restriction: ATE
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Spring Design: Wire Spring
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 680
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.02
• Manufacturer: SWAG
• Name: SW 40 92 2072

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 685
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Front Axle
• Special Purpose Vehicle: for police vehicles
• Suspension: for vehicles without electronic suspension control
• Brake Type: Disc Brake
• Length [mm]: 678
• Manufacturer Restriction: ATE
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 41048789
• Length [mm]: 695
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Required quantity: 1
• Fitting Position: Front Axle
• Construction Year from: 09.2004
• Brake Type: Disc Brake
• Length [mm]: 287
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 41048790
• Length [mm]: 300
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: ATE
• Spring Design: Wire Spring
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 41048791
• Brake Type: Disc Brake
• Length [mm]: 287
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Brake System: ATE
• Spring Design: Plate Spring
• Quantity: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0353
• Quality class: PJ

Additional information: "Tootja: DELPHI
9-3 CABRIOLET (YS3D)
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
9-3 CABRIOLET (YS3D)
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 41048790
• Brake Type: Disc Brake
• Length [mm]: 685
• Number of wear indicators [per axle]: 1
• Name: BR A 00 251
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 41048790
• Brake Type: Disc Brake
• Length [mm]: 695
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.024
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Special Purpose Vehicle: for police vehicles
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake System: ATE
• Spring Design: Plate Spring
• Manufacturer: BOSCH

• Required quantity: 1
• Fitting Position: Front Axle
• Construction Year to: 08.2004
• Brake Type: Disc Brake
• Length [mm]: 685.5
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• Inner Diameter [mm]: 71
• Outer Diameter [mm]: 295
• paired article number: 131-07-659
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Article number of recommended accessories: 231-04-036
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Brake System: ATE
• Suspension: for vehicles with sports suspension
• Manufacturer: METZGER

• Suspension: for vehicles without sports suspension
• Special Purpose Vehicle: not for police vehicles
• Fitting Position: Rear Axle Right
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 70
• Surface: Zinc-coated

• Suspension: for vehicles without sports suspension
• Special Purpose Vehicle: not for police vehicles
• Fitting Position: Rear Axle Left
• Outer Diameter [mm]: 300
• Inner Diameter [mm]: 70
• Surface: Zinc-coated

• Quality: WP
• Fitting Position: Rear Axle Left, Rear Axle Right
• for brake disc diameter [mm]: 278
• Suspension: for vehicles without sports suspension
• Diameter 1/ Diameter 2 [mm]: 295/70
• Surface: Zinc-coated

• Fitting Position: Rear Axle Right
• Suspension: for vehicles without sports suspension
• for brake disc diameter [mm]: 278
• Fabrication Number: HTO-PL-005
• paired article number: HTO-PL-004
• Manufacturer: NTY