• Number of pins: 2
• Colour Coding: black
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

Seerianumber: ECT-CH-006

• Connector Shape: oval
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Colour Coding: blue
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT&DORIA

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207019

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Keermemõõt: M12x1.5
• Võtmekaugus: 19
• Vastab originaalosa värvile: roheline, must, hall, valge
• Manufacturer: FAST

• OE-numbri jaoks: 12 38 938
• Pikkus (mm): 69
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Seerianumber: ECP-PL-009
• Manufacturer: NTY

• Seerianumber: ECP-PL-003
• Manufacturer: NTY

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-079
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 07.2006
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Passive sensor
• for OE number: 10456604
• Manufacturer: KAMOKA

• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M12 x 1,5
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Engine Code: Z 16 YNG
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: Z 16 YNG
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Length [mm]: 69
• Number of connectors: 2
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Height [mm]: 39
• Resistor [Ohm]: 2,300
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)"

• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Värv: must
• Manufacturer: METZGER

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: Z 16 YNG
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 3
• Kaal (kg): 0,06
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV233

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

Pistikkontaktide arv: 2

• Resistor [Ohm]: 2,700
• Number of pins: 2
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring, for crankshaft, without cable
• Required quantity: 1
• Operating Mode: Electric
• Socket colour: black
• Supplementary Article/Supplementary Info: with seal
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 39.3
• Number of mounting bores: 1
• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Värv: must
• valikuliselt:
• Pistikkontaktide arv: 2
• Kaal (kg): 0,03
• alternatiivne remondikomplekt: 550052
• Installatsiooni sügavus (mm): 39
• Takistus [koom]: 2,4
• Manufacturer: ERA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO
• Name: VA 366177

• Length [mm]: 69
• Number of connectors: 2
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: FAE

• Engine Code: Z 16 YNG
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Length [mm]: 69
• Number of connectors: 2
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 92 2374
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 2,700
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PU009163031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Värv: must
• Pistikkontaktide arv: 2
• Kaal (kg): 0,03
• Installatsiooni sügavus (mm): 39
• Takistus [koom]: 2,4
• Manufacturer: ERA

• Engine Code: Z 16 YNG
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 73
• Manufacturer: ERA

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Pistikkontaktide arv: 2
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 410
• Weight [kg]: 0.052, 0.054
• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Required quantity: 1
• Colour: black
• Cable Length [mm]: 315
• Number of pins: 3
• Rated Voltage [V]: 12
• Number of mounting bores: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Guarantee: 5 years guarantee
• Manufacturer: HUCO