Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Brake System: Teves
- Manufacturer: JP GROUP
-
Lisainfo: Accessory Kit,
disc brake pads -
Additional information: Accessory Kit,
disc brake pads
Lisainfo: Sensor, brake lining wear
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Manufacturer Restriction: TRW
-
Lisainfo: Accessory Kit,
disc brake pads -
Additional information: Accessory Kit,
disc brake pads
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Outer Diameter [mm]: 300
- Inner Diameter [mm]: 62
- Manufacturer: JP GROUP
- Lisainfo: Splash panel
- Additional information: Splash panel
- Fitting Position: Front Axle
-
Brake System: ATE,
dos piezas -
Name: LISAKOMPLEKT,
PIDURISADUL - Manufacturer: MAX
- Fitting Position: Front Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
-
Fabrication Number: HCZ-
PL- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year from: 01.2007
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Model Year to: 2013
- Fitting Position: Front
- Length [mm]: 159
- Weight [kg]: 0.015
- Packaging length [cm]: 10
- Packaging width [cm]: 10
- Packaging height [cm]: 2
- Manufacturer: FEBEST
- Construction Year from: 01.2007
- Construction Year to: 11.2010
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Engine Code: Z 16 XER
- Construction Year from: 03.2007
- Construction Year to: 03.2010
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Length [mm]: 300
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Manufacturer Restriction: ATE
- Length [mm]: 300
- Number of wear indicators [per axle]: 1
- Net weight [kg]: 0.02
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: NK
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 300
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Name: QB WS0255A
- Fitting Position: Rear Axle
- Brake System: LUCAS
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX
- Fitting Position: Rear Axle
- Brake System: TRW
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with manual transmission
- Suspension: for vehicles with standard suspension
- Braking/Drive Dynamics: for vehicles with ESP
- Manufacturer Restriction: ATE
- Net weight [kg]: 0.03
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: NK
- Fitting Position: Front Axle
- Brake System: Ate
- Manufacturer: ERT
- Fitting Position: Front Axle
-
Brake System: ATE
(Teves), Motorcraft - Manufacturer: FRENKIT
- Name: FR 901180
- Fitting Position: Front Axle
- Brake System: Ate
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2341A
-
Vehicle Identification Number (VIN) to: 52034869,
55038730, 58016570 -
Vehicle Equipment: for vehicles with on-
board computer - Length [mm]: 300
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.01
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 300
- Manufacturer Restriction: ATE
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
-
for brake disc diameter [mm]: 240,
264 - Fitting Position: Rear Axle
-
Brake System: Lucas,
TRW - Manufacturer: FRENKIT
- Name: FR 901245
- Fitting Position: Rear Axle
- Brake System: LUCAS
- Manufacturer: ERT
- Brake System: ATE
-
Name: Vedru,
Pidurisadul - Manufacturer: ATE
-
Lisainfo: 11.8116-
0356.1 -
Additional information: 11.8116-
0356.1
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Warning Contact Length [mm]: 298
- Required quantity: 1
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY
-
Vehicle Identification Number (VIN) to: 52034869,
55038730, 58016570 -
Vehicle Equipment: for vehicles with on-
board computer - Length [mm]: 300
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.01
- Manufacturer: SWAG
- Name: SW 40 92 7183
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake System: LUCAS
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: AUT
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 300
- Packaging length [cm]: 18.5
- Packaging width [cm]: 1
- Packaging height [cm]: 1.2
- Weight [kg]: 0.012
- Manufacturer: MINTEX
- Fitting Position: Front Axle Right
- for brake disc diameter [mm]: 280
-
Fabrication Number: HTO-
PL- 002 -
paired article number: HTO-
PL- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Left
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
PL- 001 -
paired article number: HTO-
PL- 002 - Manufacturer: NTY
-
Name: NTY HTO-
PL- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Weight [kg]: 0.03
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Rear Axle
- Quality: WP
-
Diameter 1/ Diameter 2 [mm]: 300/
62 -
Surface: Zinc-
coated
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity: 2
- Name: DE LX0236
- Manufacturer: DELPHI
- Quality class: PJ
Additional information: "Tootja: DELPHI
OPEL OMEGA,VECTRA
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OPEL OMEGA,VECTRA
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Manufacturer Restriction: ATE
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Left
- Outer Diameter [mm]: 225
- Inner Diameter [mm]: 95
- for brake disc diameter [mm]: 280
- Fitting Position: Front Axle Right
- Outer Diameter [mm]: 225
- Inner Diameter [mm]: 95
- for brake disc diameter [mm]: 280
- Fitting Position: Rear Axle
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
PL- 000 - Manufacturer: NTY
-
Name: NTY HTO-
PL- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: FAST
- Fitting Position: Front Axle Left
- for brake disc diameter [mm]: 280
-
paired article number: 131-
07- 110 - Colour: black
-
Article number of recommended accessories: 231-
03- 009 -
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fitting Position: Left,
Right, Rear Axle -
Diameter 1/ Diameter 2 [mm]: 300/
62 - Material: Sheet Steel
- Name: CFD 612701
- Manufacturer: DACO
- Construction Year from: 01.2007
- Construction Year to: 11.2010
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 287
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Engine Code: Z 16 XER
- Construction Year from: 03.2007
- Construction Year to: 03.2010
- Fitting Position: Front Axle
- Length [mm]: 300
- Brake Type: Disc Brake
- Manufacturer: BOSCH
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- for brake disc diameter [mm]: 280
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Brake System: ATE
- Manufacturer: METZGER
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Manufacturer: KAMOKA
-
Fitting Position: Left,
Front Axle, Front Axle Left - Material: Sheet Steel
- for brake disc diameter [mm]: 280
- Name: CFD 612702
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Weight [kg]: 0.385
-
Name: Plekk,
piduriketas - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Front Axle, Front Axle Right - Material: Sheet Steel
- Name: CFD 612703
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Material: Sheet Steel
- Manufacturer: DELLO AUTOMEGA
-
Diameter 1/ Diameter 2 [mm]: 300/
62 -
Fitting Position: Rear Axle,
Left, Right - Net weight [kg]: 0.83
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: NK
- Fitting Position: Rear Axle
- Weight [kg]: 0.385
- Name: SW 40 10 2666
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 287
- Number of wear indicators [per axle]: 1
- Name: BR A 00 255
- Manufacturer: BREMBO
- Fitting Position: Front Axle Left
- Quality: WP
- for brake disc diameter [mm]: 280
-
Surface: Zinc-
coated
- Fitting Position: Rear Axle
-
Diameter 1/ Diameter 2 [mm]: 300/
62 -
Name: Plekk,
piduriketas - Manufacturer: TRI
- Fitting Position: Front Axle Right
- Weight [kg]: 0.22
- Warranty: 3 years warranty
- Name: CE 57SKV102
- Manufacturer: ESEN SKV
- Fitting Position: Front Axle Left
- Weight [kg]: 0.22
- Warranty: 3 years warranty
- Name: CE 57SKV101
- Manufacturer: ESEN SKV
- Fitting Position: Front Axle Left
-
paired article number: V40-
1552 -
Surface: Zinc-
coated - Material: Sheet Steel
- Weight [kg]: 0.15
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
paired article number: V40-
1551 - Fitting Position: Front Axle Right
- Material: Sheet Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.15
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2012
-
paired article number: 19-
3440 - for brake disc diameter [mm]: 280
- Fitting Position: Front Axle Right
-
Name: Plekk,
piduriketas - Manufacturer: MAX
- Fitting Position: Rear Axle
- Brake System: TRW
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Rear Axle
-
Surface: Zinc-
coated - Material: Sheet Steel
- Weight [kg]: 0.35
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2012
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 256
-
Name: Plekk,
piduriketas - Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Sheet Steel
-
Surface: Zinc-
coated, Cathodic Painting -
Diameter 1/ Diameter 2 [mm]: 62 /
300 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Sheet Steel
- Surface: Cathodic Painting
- Manufacturer: METZGER
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
PL- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for brake disc diameter [mm]: 280
- Fitting Position: Front Axle Left
- Net weight [kg]: 0.17
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: NK
- for brake disc diameter [mm]: 280
- Fitting Position: Front Axle Right
- Net weight [kg]: 0.17
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: NK
- Fitting Position: Front Axle Left
- for brake disc diameter [mm]: 280
- paired article number: 8125 24106
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- Fitting Position: Front Axle Right
- for brake disc diameter [mm]: 280
- paired article number: 8125 24105
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- Fitting Position: Rear Axle
- Brake System: TRW
- Quantity: 6
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0342
- Quality class: PJ
Additional information: "Tootja: DELPHI
CORSA B KOMBI (F35),
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
CORSA B KOMBI (F35),
(kvaliteediklass: PJ)"
- Engine Code: Z 16 XER
- Suspension: for vehicles without FlexRide suspension
- Length [mm]: 870
- Fitting Position: Front Axle
- Number of pins: 2
-
Name: Andur,
rattaprete arv - Manufacturer: MAX
- Fitting Position: Rear Axle
- Manufacturer Restriction: TRW
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right -
for article number: KLP-
PL- 014 -
Fabrication Number: HCA-
PL- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: Z 16 XER
- Suspension: for vehicles without FlexRide suspension
- Length [mm]: 870
- Number of connectors: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Cable Length [mm]: 800
- Weight [kg]: 0.06
- Name: SW 40 94 5568
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- paired article number: 6115050
- Material: Sheet Steel
- Surface: Cathodic Painting
- Manufacturer: METZGER
- Fitting Position: Front Axle Right
- paired article number: 6115049
- Material: Sheet Steel
- Surface: Cathodic Painting
- Manufacturer: METZGER
-
Fitting Position: Rear Axle,
Left, Right - Diameter 1 [mm]: 301.2
- Diameter 2 [mm]: 62.5
-
Surface: Zinc-
coated, Stoved Enamel - SVHC: No SVHC present!
-
Name: Plekk,
piduriketas - Manufacturer: HBJ
- Fitting Position: Front Axle Right
- Material: Sheet Steel
-
Surface: Zinc-
coated, Cathodic Painting - paired article number: 55972
-
Diameter 1/ Diameter 2 [mm]: 95 /
225 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle Left
- Material: Sheet Steel
-
Surface: Cathodic Painting,
Zinc- coated - paired article number: 55973
-
Diameter 1/ Diameter 2 [mm]: 95 /
225 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.