Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Height [mm]: 14
- Inner Diameter [mm]: 16
- Material: Rubber
- Outer Diameter [mm]: 26.8
- Manufacturer: 3RG
- Engine Code: E 16 NZ
-
Vehicle Identification Number (VIN) from: J2500001,
J5000000, JE100001 - Quantity per packing unit: 10
-
Material: NBR
(nitrile butadiene rubber) - Outer Diameter [mm]: 27
- Inner Diameter [mm]: 15.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: E 16 NZ
-
Supplementary Article/Info 2: for windscreen cleaning,
for rear window cleaning -
Vehicle Identification Number (VIN) to: J2500000,
J5000000, JE100000 - Block Separation:
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
- for OE number: 431 955 651
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
- Fitting Position: Front
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of pins: 2
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Voltage [V]: 12
- Operating Mode: Electric
- Housing Diameter [mm]: 35
- Pump Type: Dual Pump
- Suction pipe connector diameter [mm]: 7
- Pressure hose connector diameter [mm]: 6
-
Fabrication Number: ESP-
PL- 001 - Manufacturer: NTY
-
Name: NTY ESP-
PL- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: E 16 NZ
-
Supplementary Article/Info 2: for windscreen cleaning,
for rear window cleaning -
Vehicle Identification Number (VIN) from: J2500001,
J5000001, JE100001 - Block Separation:
- Pump Type: Dual Pump
- Plug Type: Blade Terminal
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Pump Type: Mono Pump
- Operating Mode: Electric
- Number of pins: 2
-
Lisainfo: Washer pump for windshield washer,
single outlet -
Additional information: Washer pump for windshield washer,
single outlet
-
Vehicle Identification Number (VIN) from: JE100001,
J2500001, J5000001 - Pump Type: Dual Pump
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Fitting Position: Front
- Weight [kg]: 0.08
- Voltage [V]: 12
- Number of connectors: 2
- Supplementary Article/Info 2: for window cleaning system
- Pump Type: Mono Pump
- Manufacturer: METALCAUCHO
-
Supplementary Article/Info 2: for windscreen cleaning,
for rear window cleaning -
Vehicle Identification Number (VIN) from: J2500001,
J5000001, JE100001 - Voltage [V]: 12
- Length [mm]: 97
- Width [mm]: 45
- Height [mm]: 44
- Weight [kg]: 0.082
- Operating Mode: Electric
- Pump Type: Dual Pump
- Vehicle Equipment: for vehicles with rear window wiper
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: J2500000,
J5000000, JE100000 - Fitting Position: Front
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
- Outlet Ø [mm]: 3.4
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MEY
-
Vehicle Identification Number (VIN) from: J2500001,
J5000001, JE100001 - Operating Mode: Electric
- Fitting Position: Front and Rear
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of pins: 2
- Connection Diameter 1 [mm]: 3.4
- Connection Diameter 2 [mm]: 3.4
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MEY
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.102
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: FEB
Vehicle Identification Number (VIN) from: *********JE100001, *********J2500001, *********J5000001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: JE1*1,
J25*1, J5*1 - Fitting Position: Front
- Operating Mode: Electric
- Pump Type: Dual Pump
- Weight [kg]: 0.084
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: JE1*1,
J25*1, J5*1 - Operating Mode: Electric
- Voltage [V]: 12
- Pressure [bar]: 2
- Flow rate [l/h]: 60
- Pump Type: Dual Pump
- Housing Diameter [mm]: 35
- Suction pipe connector diameter [mm]: 7
- Pressure hose connector diameter [mm]: 6
- Assy./disassy. by qualified personnel required!:
- Name: HE 8TW005206011
- Manufacturer: HELLA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks