• Filter type: In-Line Filter
• Manufacturer Restriction: universal
• Height [mm]: 109
• Outer Diameter [mm]: 36
• Name: Ktusefilter
• Manufacturer: MAX

• Filter type: In-Line Filter
• Height [mm]: 106.5
• Outer Diameter [mm]: 35.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 6
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Kõrgus (mm): 119
• Välisläbimõõt [mm]: 53
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 6,3
• Väljalase-Ø (mm): 6,3
• pakendi pikkus [cm]: 5,8
• pakendi laius [cm]: 5,8
• pakendi kõrgus [cm]: 11,6
• Name: CH CFF100101
• Manufacturer: CHAMPION

• Construction Year from: 08.1984
• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Weight [kg]: 0.042
• Manufacturer: VALEO
• Name: VA 587005

• Vehicle Equipment: for vehicles without distributor
• Number of Teeth: 111
• Length [mm]: 1,057
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Width [mm]: 20
• Number of Teeth: 111
• Belts: with rounded tooth profile
• Weight [kg]: 0.18
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 111
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,057
• Name: Hammasrihm
• Manufacturer: GAT

• Driven Units: Camshaft
• Trim Level: CR
• Number of Teeth: 111
• Width [mm]: 20
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Front Axle
• Laius 1 (mm): 100
• Kõrgus 1 (mm): 59
• Jämedus/Tugevus 1 (mm): 15,8
• Pidurisüsteem: DELCO
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kaal (kg): 1,25
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Driven Units: Camshaft
• Number of Teeth: 111
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.159
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D1436-8554
• Test Mark: E4 90R-01587/1331
• WVA Number: 20939
• Brake System: Delco
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 100
• Width 2 [mm]: 99.9
• Height 1 [mm]: 59
• Height 2 [mm]: 59
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP415

• Fitting Position: Front Axle
• Brake System: AC DELCO
• Width [mm]: 100
• Height [mm]: 59.5
• Thickness [mm]: 15
• WVA Number: 20867
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.05
• Manufacturer: VALEO

• Vehicle Identification Number (VIN) from: D 1000029
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 15,5
• Laius (mm): 100
• Kõrgus (mm): 59
• Pidurisüsteem: DELCO
• Kaal (kg): 1,14
• Manufacturer: TOMEX BRAKES

• Length [mm]: 100
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.11
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Tootja piirang: DELCO
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• WVA-number: 20939
• Kontrolltähistus: E1 90R-01813/051
• Pikkus (mm): 99,8
• Jämedus/Tugevus (mm): 15,4
• Kõrgus (mm): 58,9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Width [mm]: 100
• Height [mm]: 59
• Thickness [mm]: 15.4
• Wear Warning Contact: prepared for wear indicator
• Brake System: Delco
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Length [mm]: 100
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.11
• Name: SW 40 91 6203
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: GENERAL MOTORS
• Width [mm]: 100
• Height [mm]: 59
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: D 1000029
• Quantity per packing unit: 4
• Width [mm]: 100
• Thickness [mm]: 15
• Height [mm]: 59
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Delco Moraine
• WVA Number: 20939
• Name: BR P 59 005
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: DELCO
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E1 90R 01024/362
• Height [mm]: 59
• Width [mm]: 100
• Thickness [mm]: 15.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake Caliper Type: Fist-type Caliper
• Fitting Position: Front Axle
• Laius (mm): 100
• Kõrgus (mm): 59
• Jämedus/Tugevus (mm): 15,8
• Pidurisüsteem: Delco
• Kontrolltähistus: E1 90 R-01568/448, E1 90R-01973/636
• MAPP-code olemas:
• jälgida mõõtu:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta soovitava lisavarustuse artiklinumber: 13.0460-0127.2, 13.0460-0205.2, 24.8190-0701.2, 24.8190-0702.2, 24.8190-0704.2, 24.8190-0712.2

• Construction Year to: 12.1982
• Brake Caliper Type: Fixed Caliper
• Fitting Position: Front Axle
• Laius (mm): 76,8
• Kõrgus (mm): 65,5
• Jämedus/Tugevus (mm): 16,5
• Pidurisüsteem: ATE
• MAPP-code olemas:
• Manufacturer: ATE

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 50
• Brake System: TRW
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 230
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Piduritrumli läbimõõt seespool [mm]: 230
• Laius (mm): 50
• Kaal (kg): 2,19
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild
• Piduritrumli läbimõõt seespool [mm]: 230
• Laius (mm): 51
• Jämedus/Tugevus (mm): 5
• Piirangutega toode/piirangu info: koos kangiga
• soovitava lisavarustuse artiklinumber: 105-0746
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Piston Diameter [mm]: 19
• Test Mark: E1 90R 01195/053
• Supplementary Article/Supplementary Info: with wheel brake cylinder
• Mounting Type: Pre-assembled
• Manufacturer Restriction: OPEL
• Inner brake drum diameter [mm]: 230
• Width [mm]: 50
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!