• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Height [mm]: 37
• Manufacturer: JP GROUP

Lisainfo: Wheel bearing kit, for one front wheel 64x37x34 mm v+laius+sisemõõt Additional information: Wheel bearing kit, for one front wheel 64x37x34 mm v+laius+sisemõõt

• Fitting Position: Rear Axle
• Width [mm]: 8.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52, 62
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.098
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 52
• Outer Diameter 2 [mm]: 62
• Height [mm]: 8.5
• Material: NBR (nitrile butadiene rubber)
• Dust Cover: with dust lip
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-DW-020
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 14.75
• Height 2 [mm]: 15
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, for one front or rear wheel
• Additional information: Wheel bearing kit, for one front or rear wheel

• Vehicle Identification Number (VIN) to: N2500000
• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 40
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Outer Diameter 1 [mm]: 40
• Inner Diameter 1 [mm]: 17
• Width 1 [mm]: 15
• Outer Diameter 2 [mm]: 50
• Inner Diameter 2 [mm]: 29
• Width 2 [mm]: 15
• Supplementary Article/Info 2: with shaft seal
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 39
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Required quantity: 2
• Parameter: DP2010.10.0103
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Width [mm]: 14.6
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle
• new version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14.6
• Width 2 [mm]: 15
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.2
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with shaft seal
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• new version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14.6
• Width 2 [mm]: 15
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.2
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with shaft seal
• Name: SW 40 85 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Fabrication Number: KLP-DW-010
• Name: NTY KLP-DW-010
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: >00/91
• Inner Diameter [mm]: 13
• Number of bores: 29
• Number of mounting bores: 17
• Width [mm]: 14
• Width 2 [mm]: 39
• Diameter 2 [mm]: 1
• Name: DA KWD1068
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• old version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.274
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• old version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.274
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 40 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 39.9, 50.3
• Inner Diameter [mm]: 17.5, 29
• Width [mm]: 14.6
• Width 1 [mm]: 14.7
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Right, Rear Axle
• Inner Diameter 1 [mm]: 17
• Outer Diameter 1 [mm]: 39
• Width 1 [mm]: 13
• Manufacturer: SNR

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 64
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0154
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Bearing Type: Angular Ball Bearing
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle both sides
• Lisainfo: Wheel bearing front, left/right
• Additional information: Wheel bearing front, left/right

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 17.5
• Outer Diameter 1 [mm]: 39.9
• Width 1 [mm]: 14.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with accessories
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 14.73
• Height 2 [mm]: 15
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Manufacturer: OPTIMAL

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.5
• Supplementary Article/Info 2: with retaining ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternative Repair Kit: 614 160 0007, 100 498 0031
• Fitting Position: Front Axle
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 66
• Inner Diameter 1 [mm]: 34
• Manufacturer: GSP

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.5
• Supplementary Article/Info 2: with retaining ring
• Name: SW 40 90 3096
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with accessories
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.566
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 72
• Packaging length [cm]: 7.2
• Packaging width [cm]: 7.2
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• Fitting Position: Right, Front Axle
• Rotation angle [°]: 90
• Tightening Torque [Nm]: 20, 130
• Manufacturer: SNR
• Name: SN R153.14

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: >00/91
• Number of bores: 34
• Width [mm]: 37
• Diameter 2 [mm]: 1
• Name: DA KWD1072
• Manufacturer: DAYCO

• Fitting Position: Right, Front Axle
• Rotation angle [°]: 90
• Tightening Torque [Nm]: 20, 100
• Manufacturer: SNR /NTN-SNR/
• Name: SN R153.25

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 66
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Width [mm]: 70
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136, 56.5
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.35
• Supplementary Article/Supplementary Info: without stop function
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Outer Diameter [mm]: 136
• Fastening Type: Four-point attachment
• Quantity per axle: 2
• Manufacturer: TOPRAN HANS PRIES

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Outer Diameter [mm]: 136
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Width [mm]: 70
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136, 56.5
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.35
• Supplementary Article/Supplementary Info: without stop function
• Name: SW 40 90 2843
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 100
• Outer Diameter [mm]: 136
• Number of pins: 2
• Connector Shape: oval
• Fastening Type: Four-point attachment
• Quantity per axle: 2
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with integrated wheel speed sensor, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Rim Hole Number: 4
• Braking/Drive Dynamics: for vehicles without ABS
• Width [mm]: 107.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.152
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub, with nut General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.