• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fabrication Number: ECC-TY-000
• Spanner Size: 24
• Socket colour: black
• Number of pins: 1
• Manufacturer: NTY

• Engine Code: 2JZ-GE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER
• Additional information: OS3557
• Lisainfo: OS3557

• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.2
• Weight [kg]: 0.04
• Name: OLISURVELšLITUS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: BOSCH

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Pressure [bar]: 2
• Housing Colour: grey
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• Sensor Type: NTC Sensor
• for OE number: 89424-87703-000
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-TY-000
• Manufacturer: NTY

• Weight [kg]: 0.04
• Manufacturer: VALEO

• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Component Number: 120-08-106
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Name: VA 366533
• Manufacturer: VALEO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: grey
• for OE number: 89465 30430
• Length [mm]: 800
• Weight [kg]: 0.122
• Thread Size: M18 x 1,5
• Supplementary Article/Info 2: with fastening material
• Connector Shape: angular
• Number of circuits: 4
• Cable Length [mm]: 800
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 750
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20156-12B1

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• Manufacturer: MEAT&DORIA

• Number of circuits: 4
• Resistor [Ohm]: 13
• Conductor Number: 4
• Length [mm]: 800
• Cable Length [mm]: 800
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Finger probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 492
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Required quantity: 1
• Number of pins: 2
• Weight [g]: 41
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 68
• Name: Andur, v„ntvoll
• Manufacturer: DEN

• Required quantity: 1
• Cable Length [mm]: 195
• Number of pins: 2
• Weight [g]: 45
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 91
• Manufacturer: DENSO
• Name: DN DCPS0106

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV103

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 720
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.2003
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, Rear, after catalytic converter

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: Front, Exhaust Manifold, before catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: 2JZ-GE
• Fitting Position: after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Regulating Probe, Finger probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 350
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Lambda Sensor
• Construction Year from: 09.2003
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV086

Exhaust System: after catalytic converter, before catalytic converter

• Fitting Position: Rear
• Construction Year from: 09.2003
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 303
• Number of pins: 4
• Weight [kg]: 0.098
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV112

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV113
• Manufacturer: ESEN SKV

• for OE number: 89465-53150, 894650D030
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 735
• Number of pins: 4
• Weight [g]: 112
• Gross Weight [g]: 145
• Manufacturer: DENSO
• Name: DN DOX-0231
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
IS I (GXE10), 04.99-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
IS I (GXE10), 04.99-
(kvaliteediklass: Q)"

• for OE number: 89465-53210, 8946530430
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 720
• Number of pins: 4
• Weight [g]: 118
• Gross Weight [g]: 151
• Manufacturer: DENSO
• Name: DN DOX-0552

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Rear
• Number of circuits: 4
• Overall Length [mm]: 470
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• for OE number: 22204-22010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• Manufacturer: DENSO
• Name: DN DMA-0108

Additional information: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)"

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.051
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 2JZ-GE
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE