Manufacturer: MAGNETI MARELLI

• for OE number: 90919-05060
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-TY-014
• Manufacturer: NTY

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Housing Colour: white
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Required quantity: 1
• Fitting Position: Intake Side
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Weight [kg]: 0.043
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Fitting Position: Exhaust Side
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168551

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 12.2007
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 366136

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-TY-005
• Manufacturer: NTY

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Lambda Sensor: Diagnostic Probe, Finger probe
• Vehicle Identification Number (VIN): GSE25
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Fitting Position: Right, Front
• Length [mm]: 30
• Outer Diameter [mm]: 14
• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

Manufacturer: AUTO-GH

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN): GSE25
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 4
• Number of pins: 3
• Weight [g]: 19
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 46
• Name: DN DCPS0109
• Manufacturer: DENSO

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: FAE

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009142951
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 22204-31020
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 58
• Manufacturer: DENSO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV111
• Manufacturer: ESEN SKV

• Construction Year to: 08.2012
• Fitting Position: Left
• for OE number: 89467-53020
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE

• Construction Year from: 09.2012
• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Cable Length [mm]: 270
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2012
• Fitting Position: Left
• for OE number: 89467-53020, 89467-50050
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 380
• Number of pins: 4
• Weight [g]: 96
• Gross Weight [g]: 129
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Construction Year from: 08.2012
• Fitting Position: Left
• for OE number: 89467-53050, 8946720030
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 330
• Number of pins: 4
• Weight [g]: 89
• Gross Weight [g]: 122
• Manufacturer: DENSO
• Name: DN DOX-0260

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased