Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front,
both sides - Quality: OE Performance
- Colour: silver
- Weight [g]: 55
- Manufacturer: GATES PASKI PRZEWODY
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 53
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 64
- Name: IM 32989
- Manufacturer: ORIGINAL IMPERIUM
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 63.5
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Name: VEDRUTALDRIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 47574
- Thickness [mm]: 23
- Outer Diameter [mm]: 79
-
Material: Plastic,
Rubber -
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Weight [kg]: 0.04
-
Name: Laager -
Kndmik. CITROEN T. C4/ DS4/ 3008/ 307/ 308 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 47578
- Thickness [mm]: 40
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 82
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Weight [kg]: 0.06
-
Name: Laager -
Kndmik. CITROEN T. C4/ 307/ 308/ RCZ - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 40
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 82
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. P. CITROEN P. BERLINGO 08- - Manufacturer: MEY
-
Fitting Position: Upper,
Front Axle -
Material: PU
(Polyurethane) - Required quantity: 2
- Name: Vedrutaldrik
- Manufacturer: TED
- Fitting Position: Rear Axle
- Length [mm]: 309
- Parameter: E
- Spring Design: Coil Spring
- Outer Diameter [mm]: 110
- Thickness 1 [mm]: 11.8
- Name: CFD 812831
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
-
Name: Vedru -
Vedrustus/ amordid PEUGEOT T. 307 00- KOMBI - Manufacturer: MAX
- Fitting Position: Rear Axle
- Length [mm]: 309
- Outer Diameter [mm]: 110
- Thickness [mm]: 11.75
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Name: vedru
- Manufacturer: MAX
- reinforced version:
- Fitting Position: Rear Axle
- Length [mm]: 328
- Parameter: E
- Spring Design: Coil Spring
- Outer Diameter [mm]: 114
- Thickness 1 [mm]: 11.5
- Name: CFD 812804
- Manufacturer: DACO
- Fitting Position: Rear Axle
- Length [mm]: 293
- Outer Diameter [mm]: 108.8
- Thickness [mm]: 12.2
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Length [mm]: 398
- Parameter: AC
- Spring Design: Coil Spring
- Outer Diameter [mm]: 170
- Thickness 1 [mm]: 12.8
- Name: CFD 802830
- Manufacturer: DACO
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Outer Diameter [mm]: 170
- Length [mm]: 398
- Name: vedru
- Manufacturer: MAX
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 1.85
- Thickness 1 [mm]: 11.8
- Outer Diameter [mm]: 110
- Length [mm]: 309
- Manufacturer: KYB
Name: Vedru - Vedrustus/amordid PEUGEOT T. 307, 308 1.4/1.6/2.0D 03.02-
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Length [mm]: 309
- Outer Diameter [mm]: 110
- Number of coils: 7.8
- Fitting Position: Rear Axle
- Weight [kg]: 1.85
- Wire Diameter [mm]: 11.8
- Replace in pairs only:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Length [mm]: 398
- Outer Diameter [mm]: 170
- Thickness [mm]: 12.75
- Manufacturer: JAPKO
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left -
Manufacturer: AUTO-
GH
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
PEUGEOT 307
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Length [mm]: 315
- Outer Diameter [mm]: 110
- Wire Diameter [mm]: 11
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 2.1
- Thickness 1 [mm]: 12.2
- Outer Diameter [mm]: 109
- Length [mm]: 293
- reinforced version:
- Name: VEDRU
- Manufacturer: KYB
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Fitting Position: Rear Axle
- Length [mm]: 313
- Weight [kg]: 2.1
- Outer Diameter [mm]: 108
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 58
- Warranty: 5 years warranty
- Number of coils: 7.9
- Packaging length [cm]: 41.5
- Packaging width [cm]: 15.1
- Packaging height [cm]: 15.2
- Wire Diameter [mm]: 11.8
- Manufacturer: MONROE
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
PEUGEOT 307
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- reinforced version:
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Fitting Position: Front Axle
- Parameter: AC
- Spring Design: Coil Spring
- Weight [kg]: 2.5
- Thickness 1 [mm]: 12.8
- Outer Diameter [mm]: 170
- Length [mm]: 398
- Manufacturer: KYB
Name: Vedru - Vedrustus/amordid CITROEN P. C4, C4 I/ PEUGEOT 307, 307 SW 1.4/1.4D/1.6 08.00-
- Fitting Position: Front Axle
- Length [mm]: 425
- Weight [kg]: 2.8
- Outer Diameter [mm]: 172
- Inner Diameter 1 [mm]: 81
- Inner Diameter 2 [mm]: 149
- Warranty: 5 years warranty
- Number of coils: 5.5
- Packaging length [cm]: 55
- Packaging width [cm]: 17.9
- Packaging height [cm]: 18
- Wire Diameter [mm]: 12.8
- Manufacturer: MONROE
- Length [mm]: 425
- Outer Diameter [mm]: 172
- Number of coils: 5.4
- Fitting Position: Front Axle
- Weight [kg]: 2.45
- Wire Diameter [mm]: 12.8
- Replace in pairs only:
- Name: vedru
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Length [mm]: 425
- Outer Diameter [mm]: 169
- Wire Diameter [mm]: 14
- Manufacturer: KAMOKA
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 36-
171910
- Fitting Position: Rear Axle
- reinforced version:
- Length [mm]: 312
- Weight [kg]: 1.9
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 56
- Warranty: 5 years warranty
- Number of coils: 6.8
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.7
- Packaging height [cm]: 16.8
- Wire Diameter [mm]: 11.8
- Manufacturer: MONROE
- Suspension: for vehicles with standard suspension
- reinforced version:
- Fitting Position: Front Axle
-
Name: Vedru -
Vedrustus/ amordid PEUGEOT P. 307 00- - Manufacturer: BIL