• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Surface: Coated
• Supplementary Article/Info 2: without wheel bearing
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Surface: Coated
• Stub Axle Diameter [mm]: 25
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
  NB Võlli läbimõõt 25 mm
• Additional information: Brake Disc
  NB Võlli läbimõõt 25 mm

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Height [mm]: 67.5
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 249
• Number of Holes: 4
• Centering Diameter [mm]: 25
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Supplementary Article/Info 2: with ABS sensor ring, with wheel bearing
• Lisainfo: Citroen C4 04->11, Peugeot 207 09->, 307 00->
• Additional information: Citroen C4 04->11, Peugeot 207 09->, 307 00->

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Outer Diameter [mm]: 283
• Manufacturer: DELLO AUTOMEGA
• Additional information: 120063010 DELLO
• Lisainfo: 120063010 DELLO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Brake Disc Type: Vented
• Number of Holes: 4
• Height [mm]: 34.2
• Centering Diameter [mm]: 66
• Inner Diameter [mm]: 133.5
• Bolt Hole Circle Ø [mm]: 108
• Bore Ø [mm]: 13
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 4
• Number of mounting bores: 2
• Thickness [mm]: 34.2
• Outer Diameter [mm]: 283
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Weight [kg]: 6.95
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Thickness [mm]: 26
• Height [mm]: 34.2
• Outer Diameter [mm]: 283
• Brake Disc Type: internally vented
• Number of Holes: 4
• Brake System: BOSCH
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Manufacturer: LPR

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0300/1428
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Height [mm]: 34.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3622

• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 4
• Number of mounting bores: 2
• Thickness [mm]: 34
• Outer Diameter [mm]: 283
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Weight [kg]: 6.95
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Type: Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Fitting Position: Front Axle
• Centering Diameter [mm]: 66
• Height [mm]: 34.2
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 24
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Height [mm]: 34.2
• Number of Holes: 4
• Thread Size: 13
• Bolt Hole Circle Ø [mm]: 108
• Machining: High-carbon
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0185/0546
• Name: PIDURIKETAS
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year from: 12.2009
• Brake Disc Type: Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Centering Diameter [mm]: 66
• Height [mm]: 34.2
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Surface: Painted
• Minimum thickness [mm]: 24
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Hub Diameter [mm]: 66
• Rim Hole Number: 4
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Surface: Coated
• Wheel Bolt Bore Ø [mm]: 108
• Outer Diameter [mm]: 283
• Manufacturer: FAST

• Construction Year from: 12.2009
• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Height [mm]: 34.2
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 66
• Bolt Hole Circle Ø [mm]: 108
• Wheel Bolt Bore Ø [mm]: 13
• Number of Holes: 4
• Brake Disc Type: Vented
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Outer Diameter [mm]: 282.6
• Brake Disc Thickness [mm]: 26.1
• Minimum thickness [mm]: 24
• Height [mm]: 34.3
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: Vented
• Centering Diameter [mm]: 66.1
• Number of Holes: 4
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 12.9
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Height [mm]: 34.2
• Minimum thickness [mm]: 24
• Surface: Coated
• Inner Diameter [mm]: 133
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 13
• Packaging length [cm]: 30.3
• Packaging width [cm]: 30.3
• Packaging height [cm]: 8.6
• Weight [kg]: 6.6
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 24
• Height [mm]: 34.2
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Surface: Coated
• Minimum thickness [mm]: 24
• Tightening Torque [Nm]: 90
• Name: BR 09.8760.11
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Surface: Painted, Cross-hatch
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 34.3
• Centering Diameter [mm]: 66
• Inner Diameter [mm]: 133.5
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: R90
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake System: Bosch
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Surface: Coated
• Minimum thickness [mm]: 24
• Tightening Torque [Nm]: 90
• Manufacturer: BREMBO
• Name: BR 09.9619.11

• Fitting Position: Front Axle
• Construction Year from: 12.2009
• Brake Disc Type: Vented, slotted/perforated
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Centering Diameter [mm]: 66
• Height [mm]: 34.2
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Surface: Painted
• Minimum thickness [mm]: 24
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 24
• Height [mm]: 34.2
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Machining: High-carbon
• Number of Holes: 4
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Height [mm]: 34.2
• Minimum thickness [mm]: 24
• Surface: Coated
• Inner Diameter [mm]: 133
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 13
• Weight [kg]: 6.6
• Name: HE 8DD355108371
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Surface: Coated
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Height [mm]: 34
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Wheel Hub Diameter [mm]: 82
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 24
• Weight [kg]: 6.74
• Hole Arrangement/Number: 6/4
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Height [mm]: 34.2
• Weight [kg]: 14.12
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Outer Diameter [mm]: 283
• Number of Holes: 4
• Centering Diameter [mm]: 66
• Tightening Torque [Nm]: 90
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake System: BOSCH
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 29.5
• Packaging width [cm]: 29.5
• Packaging height [cm]: 8.5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Height [mm]: 69.2
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: solid
• Centering Diameter [mm]: 61.9
• Number of Holes: 4
• Surface: Coated
• Fulfils ECE norm: ECE-R90
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Brake Disc Thickness [mm]: 26
• Outer Diameter [mm]: 283
• Height [mm]: 34.2
• Machining: High-carbon
• Centering Diameter [mm]: 66
• Surface: Coated
• Minimum thickness [mm]: 24
• Hole Arrangement/Number: 4/6
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with wheel bearing set, with ABS sensor ring
• Number of Holes: 4
• Height [mm]: 69.2
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Outer Diameter [mm]: 249
• Tightening Torque [Nm]: 300
• Brake System: BOSCH
• Centering Diameter [mm]: 30
• Supplementary Article/Supplementary Info: with accessories
• Brake Disc Type: solid
• Technical Information: Nut and dust cap included.
• Manufacturer: LPR

• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 4
• Height [mm]: 34.2
• Centering Diameter [mm]: 66
• Inner Diameter [mm]: 133.5
• Bolt Hole Circle Ø [mm]: 108
• Bore Ø [mm]: 13
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0118/0488
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 250
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Height [mm]: 67
• Centering Diameter [mm]: 56.5
• Bolt Hole Circle Ø [mm]: 108
• Stub Axle Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Minimum thickness [mm]: 8
• Name: PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-1971
• Additional information: 19-1971

• Fitting Position: Front Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Height [mm]: 34.2
• Minimum thickness [mm]: 24
• Surface: Coated
• Inner Diameter [mm]: 133
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 66
• Hole Arrangement/Number: 04/06
• Wheel Bolt Bore Ø [mm]: 13
• Packaging length [cm]: 30.3
• Packaging width [cm]: 30.3
• Packaging height [cm]: 8.6
• Weight [kg]: 6.6
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Surface: Coated
• Minimum thickness [mm]: 24
• Tightening Torque [Nm]: 90
• Manufacturer: BREMBO
• Name: BR 09.8760.75

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Front Axle
• Brake System: Bosch
• Brake Disc Type: internally vented, slotted
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Surface: Coated
• Minimum thickness [mm]: 24
• Tightening Torque [Nm]: 90
• Manufacturer: BREMBO
• Name: BR 09.9619.75

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Height [mm]: 69.2
• Minimum thickness [mm]: 7.5
• Surface: Painted
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Construction Year from: 12.2009
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 67
• Outer Diameter [mm]: 250
• Centering Diameter [mm]: 56
• Brake Disc Thickness [mm]: 9
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Outer Diameter [mm]: 283
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Brake Disc Type: Vented
• Number of Holes: 4
• Surface: Coated
• Height [mm]: 34.2
• Centering Diameter [mm]: 66
• Inner Diameter [mm]: 133.5
• Bolt Hole Circle Ø [mm]: 108
• Bore Ø [mm]: 13
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Name: PIDURIKETAS
• Manufacturer: ATE

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Brake Disc Thickness [mm]: 9
• Rim Hole Number: 4
• Thickness [mm]: 69
• Outer Diameter [mm]: 248
• Bolt Hole Circle Ø [mm]: 108
• Hub Outer Diameter [mm]: 30
• Surface: Oiled
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 7
• Centering Diameter [mm]: 56
• Weight [kg]: 5.56
• Manufacturer: BLUE PRINT
• Lisainfo: ADP154304 BLUEPRINT
• Additional information: ADP154304 BLUEPRINT

Supplementary Article/Info 2: with ABS sensor ring, with grease cap, with wheel bearing General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Parameter: DP1010.11.1649
• Rim Hole Number: 4
• Height [mm]: 69.2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Thread Size: M12x1,25
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 248.6
• Centering Diameter [mm]: 61.9
• Bolt Hole Circle Ø [mm]: 108
• Stub Axle Diameter [mm]: 30
• Manufacturer: DRIVE

Supplementary Article/Info 2: with protective cap/bellow, with integrated magnetic sensor ring, with nut, with wheel bearing

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Outer Diameter [mm]: 249
• Centering Diameter [mm]: 55.9
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Width [mm]: 69.2
• Thread Size: M12x1.25
• Minimum thickness [mm]: 8
• Hole Arrangement/Number: 4/4
• Inner Diameter [mm]: 30
• Manufacturer: OPTIMAL

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Fitting Position: Right, Left, Rear Axle
• Surface: Painted
• Brake Disc Type: solid
• Number of Holes: 4
• Inner Diameter 1 [mm]: 30
• Supplementary Article/Info 2: with rubber mount
• Minimum thickness [mm]: 7
• Mounting points diameter [mm]: 12
• Tightening Torque [Nm]: 300
• Width 1 [mm]: 67
• Brake Disc Thickness [mm]: 9
• Outer Diameter [mm]: 250
• Article number of the recommended special tool: Clas : OM4217, Clas : OM8154
• Manufacturer: SNR
• Name: SN KF159.53U

• Brake Disc Thickness [mm]: 9
• Rim Hole Number: 4
• Thickness [mm]: 69.2
• Outer Diameter [mm]: 248.4
• Bolt Hole Circle Ø [mm]: 108
• Hub Outer Diameter [mm]: 30
• Surface: Oiled
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 7
• Centering Diameter [mm]: 56
• Weight [kg]: 5.56
• Manufacturer: FEBI HAMULCE

Supplementary Article/Info 2: with grease cap, with wheel bearing, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Alternatively:
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0543/1778
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Surface: Coated
• Machining: Untreated
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 30
• Height [mm]: 69.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG9022RSC
• Quality class: PJ

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Brake Disc Type: solid
• Minimum thickness [mm]: 7.5
• Height [mm]: 69.2
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 56
• Stub Axle Diameter [mm]: 30
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO
• Lisainfo: QD0711
• Additional information: QD0711

Supplementary Article/Info 2: with wheel bearing, with integrated magnetic sensor ring

• Brake Type: Disc Brake
• Fitting Position: Right, Left, Rear Axle
• Brake Disc Type: solid
• Number of Holes: 4
• Inner Diameter 1 [mm]: 30
• Supplementary Article/Info 2: with rubber mount
• Minimum thickness [mm]: 7
• Mounting points diameter [mm]: 12
• Tightening Torque [Nm]: 300
• Width 1 [mm]: 67
• Brake Disc Thickness [mm]: 9
• Outer Diameter [mm]: 250
• Article number of the recommended special tool: Clas : OM4217, Clas : OM8154
• Manufacturer: SNR
• Name: SN KF159.57U

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7.5
• Height [mm]: 69.2
• Hole Arrangement/Number: 04/04
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 55.9
• Stub Axle Diameter [mm]: 30
• Supplementary Article/Supplementary Info: with axle nut
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5.1
• Manufacturer: MINTEX

Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing

• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Disc Brake
• Height [mm]: 69.2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Outer Diameter [mm]: 249
• Rim Hole Number: 4
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Technical Information: With HUB 1 bearing
• Name: PIDURIKETAS
• Manufacturer: SKF

• Brake Disc Thickness [mm]: 9
• Rim Hole Number: 4
• Thickness [mm]: 73.2
• Outer Diameter [mm]: 248.4
• Bolt Hole Circle Ø [mm]: 108
• Hub Outer Diameter [mm]: 30
• Surface: Oiled
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 7
• Centering Diameter [mm]: 56
• Weight [kg]: 5.56
• Name: SW 62 93 2782
• Manufacturer: SWAG

Supplementary Article/Info 2: with wheel bearing, with grease cap, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Supplementary Article/Info 2: with wheel bearing set, with ABS sensor ring
• Height [mm]: 69
• Centering Diameter [mm]: 30
• Outer Diameter [mm]: 249
• Minimum thickness [mm]: 7
• Tightening Torque [Nm]: 90
• Name: BR 08.9512.27
• Manufacturer: BREMBO
• Quality class: Q

• Fitting Position: Front Axle
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 24.5
• Tightening Torque [Nm]: 90
• Technical Information: ECE R 90 Homologation.
• Manufacturer: BREMBO
• Name: BR 09.8760.1X

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake System: Bosch
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 34
• Centering Diameter [mm]: 66
• Outer Diameter [mm]: 283
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 24.5
• Tightening Torque [Nm]: 90
• Technical Information: ECE R 90 Homologation.
• Name: BR 09.9619.1X
• Manufacturer: BREMBO

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Height [mm]: 69.2
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: solid
• Centering Diameter [mm]: 61.98
• Number of Holes: 4
• Surface: Coated
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Fulfils ECE norm: ECE-R90
• Inner Diameter [mm]: 30
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Number of Holes: 4
• Height [mm]: 67
• Centering Diameter [mm]: 56.5
• Bolt Hole Circle Ø [mm]: 108
• Thread Size: M12x1,25
• Stub Axle Diameter [mm]: 30
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Test Mark: E190R-02C0190/0690
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Height [mm]: 69.2
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Centering Diameter [mm]: 30
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Brake Disc Type: solid
• Thread Size: M12x1,25
• Required quantity: 2
• Name: Piduriketas
• Manufacturer: MEY

Supplementary Article/Info 2: with ABS sensor ring, with integrated wheel bearing

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Supplementary Article/Info 2: with wheel bearing, with ABS sensor ring
• Support plate diameter [mm]: 30
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 69.2
• Centering Diameter [mm]: 56
• Inner Diameter [mm]: 62
• Thread Size: M12x1,25
• MAPP code available:
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7.5
• Surface: Coated
• Height [mm]: 69.2
• Hole Arrangement/Number: 04/04
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 55.9
• Stub Axle Diameter [mm]: 30
• Supplementary Article/Supplementary Info: with axle nut
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5.1
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing

• Fitting Position: Rear Axle
• Brake Disc Type: solid, slotted
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Supplementary Article/Info 2: with wheel bearing set
• Height [mm]: 69.3
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 249
• Minimum thickness [mm]: 7
• Name: BR 08.9512.76
• Manufacturer: BREMBO

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Fitting Position: Rear Axle
• Brake Type: Brake Disc with bearing
• Brake System: TRW
• paired article number: 573032J
• Height [mm]: 69.2
• Weight [kg]: 10.57
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Outer Diameter [mm]: 249
• Number of Holes: 4
• Centering Diameter [mm]: 62
• Tightening Torque [Nm]: 90
• Bolt Hole Circle Ø [mm]: 108
• Surface: Oiled
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: with ABS sensor ring
• Version: J
• Stub Axle Diameter [mm]: 30
• Packaging length [cm]: 25.5
• Packaging width [cm]: 25.5
• Packaging height [cm]: 8.5
• Manufacturer: JURID

• Construction Year from: 02.2010
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 249
• Brake Disc Thickness [mm]: 9
• Minimum thickness [mm]: 7
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 69.2
• Centering Diameter [mm]: 56
• Inner Diameter [mm]: 61.9
• Manufacturer: METZGER

Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring

• Fitting Position: Rear Axle
• Brake Disc Type: solid, Perforated
• Brake Disc Thickness [mm]: 9
• Number of Holes: 4
• Supplementary Article/Info 2: with wheel bearing set
• Height [mm]: 69.3
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 249
• Minimum thickness [mm]: 7.5
• Technical Information: ECE R 90 Homologation.
• Name: BR 08.9512.2X
• Manufacturer: BREMBO

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Rear Axle
• Quantity: 2
• Stub Axle Diameter [mm]: 30
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9
• Height [mm]: 69
• Rim Hole Number: 4
• Outer Diameter [mm]: 249
• SVHC: No SVHC present!
• Manufacturer: FAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing