• Sensor Type: Passive sensor
• for OE number: 51271207038
• Manufacturer: KAMOKA

• Seerianumber: ESS-FT-002
• Manufacturer: NTY

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24,3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Seerianumber: ECP-ME-000
• Manufacturer: NTY

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0343 VERNET
• Lisainfo: CS0343 VERNET

• Construction Year from: 09.1999
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: M 96.21
• Number of pins: 3
• Length [mm]: 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 35170 22600, 5826473, 9181538, 22620 1F700
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Engine Code: M 96.21
• Name: EP 1.957.006
• Manufacturer: EPS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. DB C KLASA W203 1,8 02-

Manufacturer: BOSCH

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI

Manufacturer: FAST

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

Manufacturer: METZGER

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Korpusetüüp: ilma korpuseta
• Piirangutega toode/piirangu info 2: koos integreeritud õhutemp.anduriga
• Seerianumber: EPP-BM-013
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Length [mm]: 52
• Inner Diameter [mm]: 8.4
• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.045
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 96.21
• Name: EP 1.953.344
• Manufacturer: EPS

• Engine Code: M 96.21
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Required quantity: 2
• Vehicle Equipment: for vehicles without OBD
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: Front, after catalytic converter, before catalytic converter

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: M 96.21
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Vehicle Equipment: for vehicles without e-throttle
• Korpusetüüp: ilma korpuseta
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 09.2001
• Fitting Position: Front Axle, Rear Axle
• Braking/Drive Dynamics: for vehicles without ESP
• Block Separation:
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 138
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Lambda andur: soojendatud
• Kaablipikkus (mm): 335
• Pistikkontaktide arv: 4
• Manufacturer: ERA

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121591
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2002
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Equipment: for vehicles with OBD, for vehicles without OBD
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.2001
• Fitting Position: Front Axle, Rear Axle
• Braking/Drive Dynamics: for vehicles with ESP
• Block Separation:
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 143
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Cable Length [mm]: 245
• Thread Size: 18x1,5
• Length [mm]: 350
• Overall Length [mm]: 350
• Number of pins: 4
• Weight [kg]: 0.11
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 98YS6 20414, 98YS6 60257
• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 5
• Korpusetüüp: ilma korpuseta
• Manufacturer: BREMI

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Equipment: for vehicles with OBD
• Number of circuits: 4
• Overall Length [mm]: 275
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Vehicle Identification Number (VIN) from: 98YS6 20415, 98YS6 60258
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 5
• Korpusetüüp: ilma korpuseta
• Manufacturer: BREMI

• Lambda Sensor: Regulating Probe, Heated
• Length [mm]: 260
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Equipment: for vehicles without OBD
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 350
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Construction Year from: 09.1999
• Kaablipikkus (mm): 330
• Takistus [oom]: 860
• Manufacturer: METZGER

• Pistikkontaktide arv: 5
• Manufacturer: ERA