Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Material: Rubber/
Metal -
Fitting Position: Lower Front Axle,
Rear -
Outer Diameter [mm]: 58,
29 - Thickness [mm]: 55
- Inner Diameter [mm]: 12
-
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: MAX
-
Fitting Position: Front,
Lower Front Axle -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Front -
Lisainfo: Control Arm-
/ Trailing Arm Bush -
Additional information: Control Arm-
/ Trailing Arm Bush
- Inner Diameter [mm]: 12
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
-
Fitting Position: Rear,
Lower, Front Axle - Height [mm]: 55
- Outer Diameter [mm]: 58
- Weight [kg]: 0.325
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Rear -
Material: Rubber/
Metal - Thickness [mm]: 55
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 58,
29 - Manufacturer: MERTZ
-
Fitting Position: Front Axle,
both sides, Front -
Mounting Type: Rubber-
Metal Mount -
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: MAX
- Quantity per packing unit: 2
- Fitting Position: Lower Front Axle
- Height [mm]: 55
- Weight [kg]: 0.29
- Inner Diameter [mm]: 18.5
- Outer Diameter [mm]: 56
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 290
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Rear -
Lisainfo: Control Arm-
/ Trailing Arm Bush -
Additional information: Control Arm-
/ Trailing Arm Bush
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 77 00 822 503
- Manufacturer: GSP
- Vehicle Identification Number (VIN): B56F
-
Production date to: 04/
98 -
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 18
- Outer Diameter [mm]: 55
- for OE number: 7700822503
- paired article number: 4001544
-
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: SAS
-
Fitting Position: Lower Front Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829012210
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 55
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 29,
58 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
RENAULT LAGUNA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
RENAULT LAGUNA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.24
-
Name: DY 37-
03701- 5 - Manufacturer: DYS
-
Fitting Position: Front,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 55
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 55
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Front Axle Right, Front - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 55
- Inner Diameter [mm]: 18
- Width [mm]: 22
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 55
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 58,
29 -
Material: Rubber/
Metal -
Fitting Position: Lower Front Axle,
Rear - Weight [kg]: 0.196
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 55
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 58
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: MEY
-
Fitting Position: Lower Front Axle,
Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- SVHC: No SVHC present!
- Manufacturer: FAG
- Construction Year from: 01.1994
- Construction Year to: 01.2001
-
Fitting Position: Rear,
Lower, Front Axle - Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 217
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 59
- Length [mm]: 55
- Name: IM 1787
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
REN. LAGUNA I, 99-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
REN. LAGUNA I, 99-
(kvaliteediklass: PJ)"
-
Material: Rubber/
Metal - Thickness [mm]: 55
- Inner Diameter [mm]: 19
-
Outer Diameter [mm]: 30,
55 - Name: Control arm bush left=right
- Quality class: PJ
Fitting Position: Lower Front Axle, Front, Lower, Front Axle Left, Front Axle Right
Lisainfo: "Tootja: SRL
RENAULT LAGUNA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
RENAULT LAGUNA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Rear -
Lisainfo: Control Arm-
/ Trailing Arm Bush -
Additional information: Control Arm-
/ Trailing Arm Bush
- Vehicle Identification Number (VIN): B56F
-
Production date to: 04/
98 -
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 58
- for OE number: 7700824042
- paired article number: 4001535
- Manufacturer: SASIC
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
-
Length [mm]: 37,
73 - Weight [kg]: 0.45
- Required quantity: 2
-
Material: Rubber/
Metal - Inner Diameter [mm]: 32
-
Outer Diameter [mm]: 40,
72 -
Mounting Type: Rubber-
Metal Mount - Weight [g]: 450
- Manufacturer: METALCAUCHO
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 77 00 824 042
- Manufacturer: GSP
-
Fitting Position: Front Axle,
inner, Lower, behind the axle - Quantity Unit: Piece
-
Mounting Type: Rubber-
Metal Mount - Net weight [kg]: 0.27
-
Name: Puks -
Kndmik RENAULT P. LAGUNA - Manufacturer: NK
-
Fitting Position: Front Axle both sides,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: Control Arm
- Outer Diameter [mm]: 55
- Inner Diameter [mm]: 18
- Length [mm]: 55
- Weight [kg]: 0.33
- Manufacturer: RTS
-
Mounting Type: Rubber-
Metal Mount - Length [mm]: 55
- Weight [kg]: 0.32
- Inner Diameter [mm]: 18.2
- Outer Diameter [mm]: 55
-
Fitting Position: Front Axle,
Lower, both sides, Front - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter 1 [mm]: 18
- Outer Diameter 1 [mm]: 55
- Thickness 1 [mm]: 55
- Manufacturer: DELPHI
- Name: DE TD322W
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Engine mounting
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
RENAULT LAGUNA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
RENAULT LAGUNA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 58
- Thickness 1 [mm]: 55
- Manufacturer: DELPHI
- Name: DE TD323W
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.225
- Length [mm]: 55
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 58
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Lower,
Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 336004
- Height [mm]: 54.5
- Inner Diameter [mm]: 18.2
- Outer Diameter [mm]: 28.5
- Name: SK VKDS336004
- Manufacturer: SKF
-
Fitting Position: Front,
Lower Front Axle - Thickness [mm]: 55
- Inner Diameter [mm]: 19
-
Outer Diameter [mm]: 55,
30 -
Material: Rubber/
Metal - Weight [kg]: 0.326
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - Kndmik RENAULT P. LAGUNA / NOWY INDEKS: FE09386
- Weight [kg]: 0.275
- Fitting Position: Front Axle
- Height [mm]: 83.5
- Inner Diameter [mm]: 13.5
- Outer Diameter 1 [mm]: 40
- Outer Diameter 2 [mm]: 52
- Manufacturer: 3RG
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 58.6
- Length [mm]: 55.5
- Weight [kg]: 0.198
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Manufacturer: RTS
-
Fitting Position: Rear,
Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 336005
- Name: SK VKDS336005
- Manufacturer: SKF
-
Fitting Position: Front Axle,
both sides, Front -
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFORDER
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.532
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks