• Fitting Position: Rear Axle
• Inner Diameter [mm]: 25
• Width [mm]: 54
• Outer Diameter [mm]: 133
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Lisainfo: RENAULT LAGUNA 1.8, 2.0, 2
• Additional information: RENAULT LAGUNA 1.8, 2.0, 2

• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-RE-016
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 55
• Inner Diameter [mm]: 25
• Width [mm]: 43
• Manufacturer: JP GROUP
• Lisainfo: Wheel Bearing Kit
• Additional information: Wheel Bearing Kit

• Fitting Position: Front Axle
• Width [mm]: 38
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Construction Year to: 01.1997
• Fitting Position: Front Axle
• for OE number: 77 01 205 780
• Weight [kg]: 1.128
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 43
• Outer Diameter 1 [mm]: 55
• Inner Diameter 1 [mm]: 25
• Manufacturer: GSP

• Fitting Position: Rear Axle
• for model code: B562, B566, B56F, B56P
• Brake Type: Drum Brake
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• for OE number: 168 981 03 27
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• for model code: B562, B56F
• Width [mm]: 38
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake Type: Drum Brake
• for model code: B562, B566, B56F, B56P
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-RE-002
• Manufacturer: NTY

• Brake Type: Drum Brake
• Fitting Position: Rear Axle
• Width [mm]: 43
• Outer Diameter [mm]: 55
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• for model code: B562, B566, B56F, B56P
• Brake Type: Drum Brake
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• for OE number: 43210-00Q0L
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Brake Type: Drum Brake
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter 1 [mm]: 55
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.566
• Supplementary Article/Supplementary Info: with axle nut
• Name: RATTALAAGER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 44
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 133
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 25
• Manufacturer: GSP

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: ABS
• Inner Diameter [mm]: 25
• Width 1 [mm]: 43
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR
• Inner Diameter [mm]: 40
• Width 1 [mm]: 38
• Number of mounting bores: 1
• Name: DA KWD1368
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.63
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Drum Brake
• for model code: B56P, B56F, B562, B566
• Manufacturer: DRIVE

• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84.1
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Fitting Position: Front Axle
• Fabrication Number: KLP-RE-016
• Manufacturer: NTY

• Fitting Position: Front Axle
• Construction Year to: 01.1997
• Width [mm]: 38
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 84
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Number of Teeth, ABS ring: 88
• Width 1 [mm]: 38.8
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 84.05
• Inner Diameter 1 [mm]: 40
• Manufacturer: GSP

• Fitting Position: Front Axle
• for model code: B566, B56P
• Construction Year from: 01.1997
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Construction Year to: 01.1997
• Width [mm]: 38
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Drive Dynamics: for vehicles without ABS
• Inner Diameter 1 [mm]: 37
• Outer Diameter 1 [mm]: 72
• Weight [kg]: 0.68
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 01.1997
• for model code: B566, B56P
• Fitting Position: Front Axle
• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Front Axle
• Weight [kg]: 0.71
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Width [mm]: 43
• Brake Type: Drum Brake
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 133
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Height [mm]: 43
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Construction Year from: 01.1997
• Fitting Position: Front Axle
• Width [mm]: 39
• Outer Diameter [mm]: 84
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Width [mm]: 43
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Construction Year from: 01.1997
• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 84
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Height [mm]: 38
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Engine Code: G8T 706
• Construction Year from: 02.1997
• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1
• Supplementary Article/Supplementary Info: with axle nut
• Observe service information:
• Manufacturer: FEBI

Supplementary Article/Info 2: with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 1.06
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 9.1
• Packaging width [cm]: 9.1
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M12X1,5
• Number of Teeth, ABS ring: 44
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 133
• Rim Hole Number: 4
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 25
• Manufacturer: GSP

• Rim Hole Number: 4
• Width [mm]: 78
• Brake Type: Disc Brake
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 132.7
• Fitting Position: Rear Axle
• Fabrication Number: KLT-RE-012
• Manufacturer: NTY

• Suspension: for vehicles with standard suspension
• Inner Diameter 1 [mm]: 25
• Outer Diameter 1 [mm]: 55
• Tightening Torque [Nm]: 160
• Width 1 [mm]: 43
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN R155.58

• Fitting Position: Rear Axle
• Required quantity: 2
• Brake Type: Drum Brake
• for model code: B562, B566, B56F, B56P
• Width [mm]: 43
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Technical Information: With HUB 1 bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Width [mm]: 38
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Brake Type: Drum Brake
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 55
• Width [mm]: 43
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Inner Diameter 1 [mm]: 40
• Outer Diameter 1 [mm]: 84
• Width 1 [mm]: 38
• Tightening Torque [Nm]: 250
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN R155.44

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 131
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.3
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 108
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV009
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Construction Year from: 02.1997
• Rim Hole Number: 5
• Width [mm]: 54
• Brake Type: Disc Brake
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 133
• Braking/Drive Dynamics: for vehicles with ABS, for vehicles with ASB
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Required quantity: 2
• for model code: B56F, B562
• Width [mm]: 38
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Manufacturer: SKF

• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 40
• Outer Diameter 1 [mm]: 84
• Width 1 [mm]: 39
• Tightening Torque [Nm]: 280
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN R155.61

• Construction Year from: 01.1997
• Fitting Position: Front Axle
• Required quantity: 2
• for model code: B56P, B566
• Width [mm]: 39.7
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 84
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: SK VKBA3492
• Manufacturer: SKF

• Fitting Position: Right, Left, Rear Axle
• Inner Diameter 1 [mm]: 25
• Number of Holes: 4
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 44
• Width 1 [mm]: 54
• Outer Diameter 1 [mm]: 133
• Manufacturer: SNR

• Fitting Position: Rear Axle
• Construction Year to: 03.1995
• Brake Type: Disc Brake
• Outer Diameter [mm]: 132.8
• Inner Diameter [mm]: 24.9
• Width [mm]: 77.4
• Rim Hole Number: 4
• SVHC: No SVHC present!
• Manufacturer: FAG