• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 460
• Number of pins: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• for model code: KangooExpress
• Fitting Position: Front Axle
• Block Separation:
• Width [mm]: 7.4
• Outer Diameter [mm]: 85
• Number of Teeth: 44
• Inner Diameter [mm]: 75
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0267
• Additional information: 27-0267

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Number of Teeth: 26
• Width [mm]: 7.8
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 85
• Fabrication Number: NZA-RE-001
• Manufacturer: NTY
• Name: NTY NZA-RE-001

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Payload: not for increased payload
• Fitting Position: Rear Axle Right
• Sensor Type: Hall Sensor, Active sensor
• Overall Length [mm]: 720
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Payload: not for increased payload
• Fitting Position: Rear Axle Left
• Sensor Type: Hall Sensor, Active sensor
• Overall Length [mm]: 734
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle both sides
• Number of Teeth: 26
• Thickness [mm]: 7.95
• Inner Diameter [mm]: 74.95
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Number of Teeth: 44
• Thickness [mm]: 7.5
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 85
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for model code: KangooExpress
• Fitting Position: Front Axle
• Block Separation:
• Width [mm]: 7.5
• Outer Diameter [mm]: 85
• Number of Teeth: 26
• Inner Diameter [mm]: 75
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 74.9
• Width [mm]: 7.7
• Outer Diameter [mm]: 84.5
• Number of Teeth, ABS ring: 26
• Weight [kg]: 0.05
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of Teeth: 44
• Fitting Position: Front Axle both sides
• Width [mm]: 8
• Number of Teeth, ABS ring: 44
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 85
• Weight [kg]: 0.054
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Front Axle
• Block Separation:
• Inner Diameter [mm]: 74.9
• Width [mm]: 7.5
• Outer Diameter [mm]: 85
• Number of Teeth, ABS ring: 26
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: RENAULT
• Additional information: RENAULT

• Number of Teeth: 44
• Outer Diameter [mm]: 85
• Inner Diameter [mm]: 75
• Width [mm]: 8
• Fitting Position: Front Axle both sides
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-RE-037
• Supplementary Article/Info 2: with cable
• Manufacturer: NTY

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor, Active sensor
• Overall Length [mm]: 518
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle both sides
• Number of Teeth: 26
• Inner Diameter [mm]: 75
• Width [mm]: 8
• Manufacturer: METZGER

• Engine Code: K9K 700
• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Rear Axle Left
• Payload: not for increased payload
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 734
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Front Axle
• Block Separation:
• Inner Diameter [mm]: 74.85
• Width [mm]: 7.4
• Outer Diameter [mm]: 85
• Number of Teeth, ABS ring: 44
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: RENAULT
• Additional information: RENAULT

• Fitting Position: Rear Axle, Rear Axle Left
• Construction Year to: 03.2003
• Quantity: 1
• Block Separation:
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Rear Axle Left
• Number of pins: 2
• Cable Length [mm]: 710
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Front Axle
• Cable Length [mm]: 500
• for OE number: 8200186294
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS006

• Construction Year to: 03.2003
• Required quantity: 2
• Vehicle type: Kangoo Express
• Number of pins: 2
• Cable Length [mm]: 455
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 495
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0046

• Construction Year to: 03.2003
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-CH-021
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Number of pins: 2
• Cable Length [mm]: 689
• Sensor Type: Passive sensor
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle both sides
• Thickness [mm]: 8
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 85
• Number of Teeth, ABS ring: 44
• Name: ANDUR,ABS
• Manufacturer: MEY

• Engine Code: K9K 700
• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Rear Axle Right
• Payload: for increased payload
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 734
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 455
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AUTOFREN SEINSA

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Front Axle
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Additional information: 131589 HUCO
• Lisainfo: 131589 HUCO

• Payload: not for increased payload
• paired article number: 173587
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 690
• Weight [kg]: 0.048
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Payload: not for increased payload
• paired article number: 173582
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 690
• Weight [kg]: 0.051
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Payload: not for increased payload
• paired article number: 33 10 1864
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 690
• Weight [kg]: 0.048
• Name: SW 33 10 1863
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Payload: not for increased payload
• paired article number: 33 10 1863
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 690
• Weight [kg]: 0.051
• Name: SW 33 10 1864
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Construction Year from: 04.2003
• Quantity: 1
• Payload: not for increased payload
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 725
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left
• Payload: not for increased payload
• Construction Year from: 04.2003
• Overall Length [mm]: 775
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: white
• Cable Length [mm]: 665
• paired article number: 30699
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Payload: for increased payload
• paired article number: 33 10 2375
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 690
• Weight [kg]: 0.05
• Name: SW 33 10 2254
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Construction Year from: 04.2003
• Quantity: 1
• Payload: not for increased payload
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 760
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20590

• Fitting Position: Front Axle
• Construction Year from: 04.2003
• Overall Length [mm]: 570
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: white
• Cable Length [mm]: 490
• paired article number: 30390
• Weight [kg]: 0.13
• Manufacturer: A.B.S.

• Payload: for increased payload
• Required quantity: 1
• Construction Year to: 03.2003
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Construction Year to: 03.2003
• Overall Length [mm]: 570
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 470
• paired article number: 30694
• Weight [kg]: 0.13
• Manufacturer: A.B.S.

• Payload: for increased payload
• paired article number: 174755
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 690
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Payload: for increased payload
• Construction Year from: 04.2003
• Overall Length [mm]: 775
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: white
• Cable Length [mm]: 685
• paired article number: 30697
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Required quantity: 2
• Construction Year to: 03.2003
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Engine Code: K9K 700
• Fitting Position: Rear Axle Left
• Payload: for increased payload
• Number of pins: 2
• Sensor Type: Hall Sensor
• Cable Length [mm]: 745
• Manufacturer: FAE

• Fitting Position: Front Axle
• Construction Year from: 04.2003
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 560
• Manufacturer: DELPHI
• Name: DE SS20114

• Construction Year from: 04.2003
• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Front Axle
• Required quantity: 2
• Block Separation:
• Cable Length [mm]: 520
• Fitting Depth [mm]: 28.2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Payload: for increased payload
• Required quantity: 1
• Construction Year from: 04.2003
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Payload: not for increased payload
• Sensor Type: Active sensor
• Cable Length [mm]: 720
• Number of pins: 2
• Fitting Position: Rear Axle Right
• paired article number: 16-14 899 0044
• Name: Andur, rattap””rete arv
• Manufacturer: MEY

• Fitting Position: Rear Axle Left
• Construction Year to: 03.2003
• Overall Length [mm]: 795
• Length [mm]: 37
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 690
• paired article number: 30693
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 515
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Required quantity: 2
• Construction Year from: 04.2003
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Engine Code: K9K 700
• Construction Year to: 03.2003
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Cable Length [mm]: 542
• Sensor Length [mm]: 28
• Name: EP 1.962.078
• Manufacturer: EPS

• Fitting Position: Right, Rear Axle
• Cable Length [mm]: 747
• Name: SN ASB155.43
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle Left
• Construction Year from: 04.2003
• Quantity: 1
• Payload: for increased payload
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 745
• Name: DE SS20814
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 450
• Number of pins: 2
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Fitting Position: Right, Left, Front Axle
• Cable Length [mm]: 548
• Name: SN ASB155.40
• Manufacturer: NTN-SNR

• Construction Year to: 03.2003
• Engine Code: K9K 700
• Payload: not for increased payload
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 715
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Manufacturer: FAE

• Payload: not for increased payload
• Required quantity: 1
• Construction Year to: 03.2003
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle Right
• Cable Length [mm]: 682
• Number of pins: 2
• Sensor Type: Active sensor
• Manufacturer: AUTOFREN SEINSA

• Engine Code: K9K 700
• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Rear Axle Left
• Payload: for increased payload
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 748
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Fitting Position: Rear Axle Left
• Construction Year to: 03.2003
• Vehicle type: Kangoo Rapid
• Cable Length [mm]: 745
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: FAE

• Engine Code: K9K 700
• Construction Year from: 04.2003
• Construction Year to: 12.2007
• Fitting Position: Rear Axle Right
• Payload: not for increased payload
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 720
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Sensor Type: Passive sensor
• Cable Length [mm]: 460
• Braking/Drive Dynamics: for vehicles with ABS
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle Right
• Construction Year to: 03.2003
• Overall Length [mm]: 780
• Length [mm]: 37
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 675
• paired article number: 30692
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Construction Year to: 03.2003
• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Front Axle
• Required quantity: 2
• Block Separation:
• Cable Length [mm]: 455
• Fitting Depth [mm]: 28.1
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year to: 03.2003
• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Rear Axle Right
• Required quantity: 1
• Block Separation:
• Cable Length [mm]: 730
• Fitting Depth [mm]: 37.7
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Right, Rear Axle
• Construction Year to: 03.2003
• Block Separation:
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 03.2003
• for model code: Kangoo Express, Kangoo Rapid
• Fitting Position: Rear Axle Left
• Required quantity: 1
• Block Separation:
• Cable Length [mm]: 730
• Fitting Depth [mm]: 37.7
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year to: 03.2003
• Fitting Position: Rear Axle Left
• Payload: not for increased payload
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 727
• Manufacturer: FAE

• Fitting Position: Left, Rear Axle
• Construction Year to: 03.2003
• Block Separation:
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.