• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Sensor Type: Hall Sensor
• Fabrication Number: ECP-AU-001
• Manufacturer: NTY

• Number of pins: 4
• Connector Shape: angular
• Socket colour: black
• Fitted Diameter [mm]: 20
• for OE number: 22 63 094 18R, 22630 00QAF, 4406830
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fabrication Number: ECP-MS-009
• Manufacturer: NTY

• Construction Year from: 01.2007
• Construction Year to: 01.2010
• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: G9U 632
• Construction Year from: 01.2007
• Housing Colour: black
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 11.2006
• Construction Year to: 04.2010
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV261
• Manufacturer: ESEN SKV

• Fabrication Number: ECM-RE-006
• Manufacturer: NTY

Lisainfo: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10- Additional information: ENG. 0.9-2.5D RENAULT CLIO 12-,MEGANE 03-,TRAFIC 06-, OPEL MOVANO 06-,VIVARO 01-,NISSAN MICRA III 05-12,NOTE 06-12,FIAT 500 09-,DOBLO 10-,DACIA DUSTER 10-,LOGAN 10-,DOKKER 12-,ALFA ROMEO 159 09-12, GIULIETTA 10-

• Engine Code: G9U 632
• Construction Year to: 12.2006
• Housing Colour: black
• Name: EP 1.830.251
• Manufacturer: EPS

for article number: 1.880.177, 1.880.492, 1.880.504, 1.880.505, 1.880.506, 1.880.509, 1.880.604, 1.880.666, 1.880.700, 1.880.702, 1.880.703S, 1.880.704, 1.880.705, 1.880.707, 1.880.710S, 1.880.714, 1.880.715

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 28
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.06
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Housing Colour: black
• Diameter [mm]: 20
• Manufacturer: FAE

Manufacturer: FAST

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Alternative Repair Kit: 550020
• Resistor [kOhm]: 10
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/grey
• Manufacturer: BREMI

• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009121391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: G9U 632
• Name: EP 1.953.349
• Manufacturer: EPS

• Number of pins: 3
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10130

• Construction Year from: 11.2006
• Construction Year to: 04.2010
• Manufacturer: BOSCH
• Name: BS 0986280412

• Height [mm]: 28
• Supplementary Article/Info 2: for camshaft, without cable
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Housing Colour: black
• Resistor [kOhm]: 10
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: G9U 632
• Number of pins: 3
• Name: DE SS10752-12B1
• Manufacturer: DELPHI

• Construction Year from: 11.2006
• Construction Year to: 04.2010
• Number of pins: 3
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• for OE number: 22 36 500 01R, 93857938, 55209194
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: G9U 632
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.121
• Manufacturer: EPS

Number of pins: 3

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550756
• Manufacturer: ERA

• Construction Year from: 11.2006
• Construction Year to: 04.2010
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Production date to: 26.06.2006
• Fitting Position: Exhaust Turbocharger
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: yellow
• Cable Length [mm]: 535
• Thread Size: M12x1.25
• Manufacturer: METZGER

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Engine Code: G9U632
• Vehicle type: Master T28
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152301
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Resistor [kOhm]: 10
• Manufacturer: ERA

• Housing Type: with housing
• Number of pins: 6
• Fabrication Number: EPP-RE-001
• Manufacturer: NTY
• Name: NTY EPP-RE-001

• Colour: yellow
• Fabrication Number: EGT-PL-042
• Cable Length [mm]: 460
• Manufacturer: NTY

• Number of pins: 6
• Suction pipe connector diameter [mm]: 70
• Quality class: PJ
• Name: Air flow sensor

• for OE number: 82 00 629 249, 93198108
• Number of pins: 2
• Socket colour: brown
• Fabrication Number: EGT-RE-001
• Cable Length [mm]: 405
• Manufacturer: NTY

• Fabrication Number: EFP-RE-004
• Manufacturer: NTY

• Lambda Sensor: Broadband lambda sensor, Regulating Probe
• Fitting Position: before catalytic converter
• Number of pins: 6
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 6
• Connector Shape: rectangular
• Housing Type: with housing
• Housing material: Plastic
• for OE number: 8200280060
• Manufacturer: DELLO AUTOMEGA

• Engine Code: G9U 632
• Emission Standard: Euro 4 (D4)
• for article number: 86189E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Manufacturer: MAGNETI MARELLI
• Name: MM AMMQ19771

• Mounting Type: Pipe-neck
• Number of pins: 6
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: G9U 632
• Housing Type: with housing
• Length [mm]: 110
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.364
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Housing Type: with housing
• Number of pins: 6
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10367-12B1

• Engine Code: G9U 632
• Fitting Position: before catalytic converter
• Cable Length [mm]: 500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.404
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Alternatively:
• Number of pins: 6
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Number of mounting bores: 2
• Manufacturer: ERA

• Length [mm]: 110
• Manufacturer: FAST

• Transmission Type: Manual Transmission
• Number of pins: 6
• Number of mounting bores: 3
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles without cruise control
• Version: AM
• Manufacturer: METZGER

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 6
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before soot particulate filter
• Number of pins: 2
• Manufacturer: METZGER

• Construction Year from: 11.2006, 05.2007
• Construction Year to: 04.2007, 04.2010
• Fuel Mixture Formation: Common Rail (CR), Direct Injection
• for OE number: 82 00 739 701
• Block Separation:
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Construction Year to: 07.2010
• Fitting Position: after catalytic converter
• Lambda Sensor: Broadband lambda sensor, Regulating Probe
• Number of pins: 5
• Connector Shape: D Shape
• Cable Length [mm]: 440
• for article number: 81603E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 6
• Manufacturer: BREMI

• Engine Code: G9U 632
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 570
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Construction Year from: 11.2006
• Construction Year to: 04.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 655
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Engine Code: G9U 632
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Construction Year to: 07.2010
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Manufacturer: VALEO
• Name: VA 368417

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Resistor Type: Hot-film Sensor
• Number of connectors: 6
• Weight [kg]: 0.18
• for OE number: 82 00 280 060
• Housing Type: with housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 6
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Number of mounting bores: 2
• Manufacturer: ERA

• Engine Code: G9U 632
• Emission Standard: Euro 4 (D4)
• for article number: 86189
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005, 55564978, 5801529676, 82 00 420 670
• Manufacturer: MEAT&DORIA

• Engine Code: G9U 632
• Colour: black
• Number of pins: 6
• Manufacturer: VDO