• Fitting Position: Front Axle, inner, Lower, behind the axle
• Net weight [kg]: 0.71
• Lisainfo: .
• Additional information: .

• Axle alignment required after fitting:
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 27
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.115
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: Esisild, kahepoolne
• Siseläbimõõt [mm]: 28
• Välisläbimõõt [mm]: 55
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Lower, Lower Front Axle
• for OE number: 09 160 394
• Manufacturer: GSP

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter 1 [mm]: 28
• Outer Diameter 1 [mm]: 56
• Thickness 1 [mm]: 74
• Name: DE TD713W
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 55.5
• Inner Diameter [mm]: 28
• Width [mm]: 58
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower, Lower Front Axle
• for OE number: 09 160 395
• Manufacturer: GSP

• Required quantity: 4
• Inner Diameter [mm]: 22
• Fitting Position: Upper Front Axle, Front, Rear
• Name: Puks
• Manufacturer: TED

• Installatsiooni pool: Esisild, kese
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,49
• Name: DY 37-08023-6
• Manufacturer: DYS

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)"

• Fitting Position: Lower, Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right, Front Axle Left, Lower, Rear
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 56
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right, Front Axle Left, Centre
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: COC 49400751
• Manufacturer: CORTECO

• Fitting Position: Front Axle, Lower, Front, both sides
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Required quantity: 2
• Manufacturer: TEDGUM_TD

• Installatsiooni pool: Esisild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 74
• Siseläbimõõt [mm]: 28
• Manufacturer: FAST

• for OE number: 8200767822, 8200767825
• Vehicle type: Master T35
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.53
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 7.4
• Manufacturer: FEBEST

• Thickness [mm]: 74
• Inner Diameter [mm]: 28
• Fitting Position: Lower Front Axle, Front
• Outer Diameter [mm]: 56
• Name: Puks - K„„ndmik OPEL P. MOVANO
• Manufacturer: MAX

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)"

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Kõrgus (mm): 79
• Siseläbimõõt [mm]: 28
• Välisläbimõõt [mm]: 55
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, Rear
• Manufacturer: JP GROUP
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Installatsiooni pool: taga, esisild alla
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 79
• Siseläbimõõt [mm]: 28
• Manufacturer: FAST

• Fitting Position: Front Axle, Rear, Upper
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 47
• for OE number: Part of 7700302115
• Name: Puks - K„„ndmik RENAULT P. MASTER/MOVANO 98-
• Manufacturer: SAS

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN): JD
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55
• for OE number: 7700302122
• paired article number: 4001545
• Manufacturer: SASIC

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Kõrgus (mm): 74
• Siseläbimõõt [mm]: 28
• Välisläbimõõt [mm]: 55
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild, all, ees
• Siseläbimõõt [mm]: 28
• Välisläbimõõt [mm]: 56
• Kõrgus (mm): 74
• Name: ALT 86276AL
• Manufacturer: ALTE AUTOMOTIVE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front Axle, Lower, both sides, Front
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,63
• Name: DY 37-08023-5
• Manufacturer: DYS

• for OE number: 8200767822, 8200767825
• Vehicle type: Master T35
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.675
• Packaging length [cm]: 7.9
• Packaging width [cm]: 7.5
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 79
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik OPEL P. MOVANO
• Manufacturer: MEY

• Vehicle Identification Number (VIN): JD
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55
• for OE number: 7700302123
• paired article number: 4001548
• Manufacturer: SASIC

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
R. MASTER 97-/MOVANO
(kvaliteediklass: PJ)"

• Thickness [mm]: 74
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.5
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.46
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 79
• Inner Diameter [mm]: 28
• Fitting Position: Lower Front Axle, Rear
• Outer Diameter [mm]: 56
• Name: Puks - K„„ndmik RENAULT P. MASTER
• Manufacturer: MAX

• Thickness [mm]: 74
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.5
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.46
• Manufacturer: SWAG
• Name: SW 40 92 4262

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.4
• Length [mm]: 74
• paired article number: 270796
• Weight [kg]: 0.64
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner

• Fitting Position: Front Axle Right, Front Axle Left, Upper
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 64
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter 1 [mm]: 28
• Outer Diameter 1 [mm]: 55
• Thickness 1 [mm]: 79
• Name: DE TD697W
• Manufacturer: DELPHI

• Thickness [mm]: 79
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.5
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.6
• Name: Puks - K„„ndmik RENAULT P. MASTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Right, Left, outer
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: COC 49398134
• Manufacturer: CORTECO

• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: without accessories
• Length [mm]: 79
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.15
• Fitting Position: Front Axle, Lower, both sides, Rear
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 79
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik RENAULT P. MASTER
• Manufacturer: MEY

• Thickness [mm]: 79
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.5
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.6
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 60
• Inner Diameter [mm]: 22
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 48
• Outer Diameter 2 [mm]: 58
• Weight [kg]: 0.23
• Manufacturer: SWAG
• Name: SW 60 92 7179

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 60
• Inner Diameter [mm]: 22
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 48
• Outer Diameter 2 [mm]: 58
• Weight [kg]: 0.23
• Name: Puks - K„„ndmik RENAULT P. MASTER/MOVANO 98-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, paremal, vasakul, taga
• Materjal: Kumm/metall
• Laagritüüp: Kummi-metalllaager
• Siseläbimõõt [mm]: 28
• Jämedus/Tugevus (mm): 79
• Välisläbimõõt [mm]: 56
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Upper Front Axle, both sides
• Required quantity: 4
• Name: Puks
• Manufacturer: TED

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.4
• Width [mm]: 74
• SVHC: No SVHC present!
• Manufacturer: FAG

• Installatsiooni pool: üleval, esisild vasakul, esisild paremal
• Jämedus/Tugevus (mm): 60
• Laius (mm): 113
• Siseläbimõõt [mm]: 22
• Välisläbimõõt [mm]: 64
• Sisekeermemõõde: M10 x 1,5
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild vasakul, esisild peal, esisild paremal
• Jämedus/Tugevus (mm): 60
• Laius (mm): 113
• Siseläbimõõt [mm]: 22
• Välisläbimõõt [mm]: 64
• Manufacturer: FAST

• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 55.4
• Width [mm]: 79
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear, Upper, Front, Front Axle both sides
• Required quantity: 4
• paired article number: VKDS 336036
• Length [mm]: 115.3
• Height [mm]: 66.6
• Inner Diameter [mm]: 22
• Name: SK VKDS336036
• Manufacturer: SKF

• Inner Diameter 1 [mm]: 22
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD1804W

Fitting Position: Front Axle, inner, in front of axle, behind the axle, Upper

• Width [mm]: 113
• Thickness [mm]: 60
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 64
• Internal Thread Size: M10 x 1,5
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Weight [kg]: 0.874
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik RENAULT P. MASTER/MOVANO 98- KPL Z MOCOWANIEM

• Width [mm]: 113
• Thickness [mm]: 60
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 64
• Internal Thread Size: M10 x 1,5
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Weight [kg]: 0.86
• Manufacturer: SWAG
• Name: SW 60 92 7181

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.