Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- for OE number: 7700798900
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 147
- Manufacturer: IMPERGOM
- Name: IM 36568
- Fitting Position: Front Axle
- Manufacturer: GSP
- Fitting Position: Front Axle
- Weight [kg]: 0.12
- Name: Vedrutaldrik
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Upper - Required quantity: 2
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
- Weight [kg]: 0.18
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 25
-
Inner Diameter [mm]: 12,
18.5 - Outer Diameter [mm]: 79
-
Internal Thread Size: M14 x 1,
5 - Spanner Size: 21
-
Material: Rubber,
Aluminium - Fitting Position: Front Axle
- Weight [kg]: 0.16
-
Name: Laager -
Kndmik. RENAULT P. CLIO - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Spring Design: Coil spring with constant wire diameter
- Name: vedru
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Length [mm]: 220
- Outer Diameter [mm]: 131
- Wire Diameter [mm]: 12
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Length [mm]: 378
- Manufacturer: MAX
-
Lisainfo: 60-
0292 -
Additional information: 60-
0292
Name: Vedru - Vedrustus/amordid RENAULT P. CLIO 98-05 1,5DCI WYS 37,8CM
- Fitting Position: Front Axle
- Parameter: AC
- Spring Design: Coil Spring
- Name: CFD 803002
- Manufacturer: DACO
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Length [mm]: 378
- Name: vedru
- Manufacturer: MAX
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
RENAULT CLIO II 98-
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Spring Design: Coil spring with constant wire diameter
- Manufacturer: LESJOFORS
- Fitting Position: Rear Axle
- Spring Design: Coil spring with constant wire diameter
- Manufacturer: KILEN
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
RENAULT CLIO 98-
(kvaliteediklass: PJ)"
- Length [mm]: 360
- Outer Diameter [mm]: 142
- Number of coils: 5.5
- Fitting Position: Front Axle
- Weight [kg]: 1.9
- Wire Diameter [mm]: 11.5
- Replace in pairs only:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.2005
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 373
- Weight [kg]: 1.8
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 146
- Warranty: 5 years warranty
- Packaging length [cm]: 43
- Packaging width [cm]: 15
- Packaging height [cm]: 15
- Wire Diameter [mm]: 11.2
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Parameter: AC
- Spring Design: Coil Spring
- Manufacturer: KYB
Name: Vedru - Vedrustus/amordid RENAULT P. CLIO II, THALIA I 1.5D 06.01-
- Fitting Position: Rear Axle
- Replace in pairs only:
- Required quantity: 2
- Material: Spring Steel
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Vedru - Vedrustus/amordid RENAULT T. CLIO 98- 1,2-2,0
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: KILEN
- Construction Year to: 04.2005
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- reinforced version:
- Length [mm]: 371
- Weight [kg]: 2.2
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 147
- Warranty: 5 years warranty
- Packaging length [cm]: 43
- Packaging width [cm]: 15
- Packaging height [cm]: 15
- Wire Diameter [mm]: 12
- Manufacturer: MONROE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Spring Design: Coil Spring
- Replace in pairs only:
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 04.2005
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 220
- Weight [kg]: 1.99
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 131
- Warranty: 5 years warranty
- Number of coils: 6.5
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.8
- Packaging height [cm]: 16.7
- Wire Diameter [mm]: 12.8
- Manufacturer: MONROE
- Fitting Position: Rear Axle
- Spring Design: Coil spring with inconstant wire diameter
- Manufacturer: LESJOFORS
- Construction Year to: 04.2005
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Length [mm]: 226
- Weight [kg]: 2.2
- Inner Diameter 1 [mm]: 41
- Inner Diameter 2 [mm]: 41
- Warranty: 5 years warranty
- Number of coils: 6.9
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.7
- Packaging height [cm]: 16.8
- Wire diameter from [mm]: 9
- Wire diameter to [mm]: 13
- Manufacturer: MONROE
Spring Design: Mini Block, Coil spring with inconstant wire diameter
- Fitting Position: Rear Axle
- Replace in pairs only:
- reinforced version:
- Required quantity: 2
- Material: Spring Steel
- replacement in pairs recommended:
-
Name: Vedru -
Vedrustus/ amordid RENAULT - Manufacturer: MEY
- Name: Coil spring
- Quality class: Q
Lisainfo: "Tootja: SUPLEX
RENAULT CLIO II
(kvaliteediklass: Q)"
- reinforced version:
- Fitting Position: Rear Axle
- Spring Design: Coil spring with constant wire diameter
- Manufacturer: LESJOFORS
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Manufacturer: BIL
Name: Vedru - Vedrustus/amordid RENAULT P. CLIO 2 98- 1,5DCIV/B3
- reinforced version:
- Fitting Position: Rear Axle
- Spring Design: Coil spring with constant wire diameter
- Manufacturer: KILEN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks