Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Supplementary Article/Supplementary Info: with shrink squeeze connector,
with gaskets/ seals - Number of pins: 3
- Supplementary Article/Info 2: with pipe
- Housing Colour: black
- Plug Type: Blade Terminal
- Weight [kg]: 0.013
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Exhaust Manifold
- Observe technical data:
-
Manufacturer Restriction: Citroen,
Peugeot, Renault, Nissan, Mercedes- Benz - Number of pins: 3
- Cable Length [mm]: 200
- Supplementary Article/Supplementary Info: with socket housing
- Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Cable Cross Section [mm²]: 0.75
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE
- Number of pins: 3
- Warranty: 5 years warranty
-
Name: Andur,
heitgaasisurve - Manufacturer: HUC
Exhaust System: for vehicles with factory fitted soot -/particulate filter
- Exhaust System: before turbocharger
- Engine Code: M9R 610
- Number of pins: 3
- for OE number: 1401000Q0C
- Manufacturer: NRF
- Exhaust System: before turbocharger
- Number of circuits: 2
- Length [mm]: 298
- Manufacturer: ASHIKA
- Emission Standard: Euro 5
- Number of pins: 3
- Opening pressure [kPa]: 1
- Manufacturer: DELPHI
- Name: DE DPS00015
- Emission Standard: Up to Euro 5
- Number of pins: 3
-
Name: ANDUR,
HEITGAASISURVE - Manufacturer: MEY
- Emission Standard: Up to Euro 5
-
for OE number: 22770-
00Q0A - Connector Shape: oval
- Number of circuits: 1
- Number of mounting bores: 1
- Number of pins: 3
- Weight [kg]: 0.019
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 3
- Weight [kg]: 0.05
- for OE number: 82 00 974 421
- Name: SW 33 10 1635
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Colour: black
-
Pressure [Pa] to: 150,
000 - Supplementary Article/Info 2: without connection line
- Manufacturer: AIC
Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Pressure hose connector diameter [mm]: 5,
6.5 - Length [m]: 1
- Material: Silicone
- Chemical Properties: Oil resistant
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +350
-
Clamping range from [mm]: 10,
11, 11.5, 12.5 -
Clamping range to [mm]: 12.5,
13.5, 14, 15 - SVHC: No SVHC present!
- Manufacturer: HBE
Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)
- Fitting Position: Exhaust Turbocharger
- Thread Size: M12x1.25
- Cable Length [mm]: 260
- Number of pins: 2
- Connector Shape: rectangular
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.14
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV428
-
Lambda Sensor: Regulating Probe,
Heated - Conductor Number: 5
- Resistor [Ohm]: 4.9
- Length [mm]: 370
- Number of circuits: 5
- Cable Length [mm]: 370
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM281
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Number of connectors: 3
- Supplementary Article/Info 2: without fastening clamp
- Additionally required articles (article numbers): 8201428503
- Manufacturer: ERA
- Fitting Position: before catalytic converter
-
Lambda Sensor: Regulating Probe,
Heated - Model Year to: 2016
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Name: SW 33 10 4087
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M9R 610,
M9R610 - Fitting Position: before catalytic converter
- Required quantity: 1
- Manufacturer Restriction: BOSCH
- Cable Length [mm]: 350
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.389
- Manufacturer: EPS
Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: before catalytic converter
- Required quantity: 1
- Engine Code: M9R610
- Cable Length [mm]: 400
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166801
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 370
-
Name: DE ES21268-
12B1 - Manufacturer: DELPHI
- Fitting Position: before catalytic converter
-
Lambda Sensor: Regulating Probe,
Heated - Model Year to: 2016
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 370
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Warranty: 3 years warranty
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Lambda Sensor: Regulating Probe
- Construction Year from: 10.2010
- Fitting Position: before catalytic converter
- Length [mm]: 400
- Number of pins: 6
- Manufacturer: FAE
- Fitting Position: Exhaust Turbocharger
- Number of pins: 2
- Cable Length [mm]: 250
- Sensor Type: NTC Sensor
-
Name: Andur,
heitgaasitemperatuur - Manufacturer: MEY
- Shape: straight
- Number of pins: 2
- Socket colour: brown
- Cable Length [mm]: 220
-
for OE number: 4420680,
82 00 930 751 - Manufacturer: MEAT&DORIA