• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M9T 690
• Housing Colour: black
• Manufacturer: FACET

for article number: 7.8666, 7.8703S, 7.8706, 7.8710S, 7.8716, 7.8718, 7.8719, 7.8720, 7.8737, 7.8782, 7.8785, 7.8883, 7.8916, 7.8930

• Engine Code: M9T 690
• Housing Colour: black
• Name: EP 1.830.337
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: JPN

• Fabrication Number: ECM-NS-000
• Manufacturer: NTY

• Engine Code: M9T 890
• Construction Year from: 10.2012
• Construction Year to: 12.2015
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Manufacturer: BREMI

• Number of pins: 3
• Manufacturer: JPN

• Construction Year from: 04.2010
• Construction Year to: 06.2014
• Engine Code: M9T.6.90,M9T.6.92
• Diameter [mm]: 12.6
• Manufacturer: VALEO

• Engine Code: M9T 690
• Manufacturer: FACET

• Engine Code: M9T 690
• Name: EP 1.953.551
• Manufacturer: EPS

• Fabrication Number: ECS-NS-001
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: oval
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• Quality: OE EQUIVALENT
• for OE number: 8200685363
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253803

• Number of pins: 3
• Manufacturer: JPN

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Housing Colour: black
• Manufacturer: FAE

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: M9T 890
• Construction Year from: 10.2012
• Construction Year to: 12.2015
• Manufacturer: BOSCH
• Name: BS 0281002961

• Weight [kg]: 0.022
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.022
• Name: SW 60 10 3603
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Manufacturer: 3RG

• Engine Code: M9T 690, M9T 890
• Number of pins: 3
• Manufacturer: MEYLE

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for OE number: 2373100Q0C
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Engine Code: M9T 890
• Construction Year from: 10.2012
• Construction Year to: 12.2015
• Manufacturer: BOSCH

• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: FAST

• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• Manufacturer: FAE

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.6
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 49
• Manufacturer: DELPHI
• Name: DE PS10210

• Construction Year from: 04.2010
• Construction Year to: 06.2014
• Engine Code: M9T.6.90,M9T.6.92
• Height [mm]: 28
• Number of connectors: 3
• Required quantity: 1
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable, with seal ring
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.034
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 04.2010
• Construction Year to: 06.2014
• Engine Code: M9T.6.90,M9T.6.92
• Diameter [mm]: 12.6
• Manufacturer: VALEO
• Name: VA 255605

• Emission Standard: Euro 5
• Number of pins: 3
• Opening pressure [kPa]: 1.1
• Manufacturer: DELPHI

• Number of pins: 3
• Connector Shape: oval
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• for OE number: 4420747
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 890
• Construction Year from: 10.2012
• Construction Year to: 12.2015
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV735

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.018
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M9T 690
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: M9T 690
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.177
• Manufacturer: EPS

• for model code: Master T45
• Required quantity: 1
• Vehicle configuration line / variant: ENPC01
• Block Separation:
• Engine Code: M9T 690, M9T 890
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Thread Size: M12x1.25
• Colour: brown
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF KLIMATYZACJA

Fitting Position: before catalytic converter, before soot particulate filter

• for model code: Master T45
• Required quantity: 1
• Vehicle configuration line / variant: SAN513/TWC
• Block Separation:
• Engine Code: M9T 690, M9T 890
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 12
• Thread Size: M12x1.25
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF KLIMATYZACJA

Fitting Position: before catalytic converter, before soot particulate filter

• Engine Code: M9T 690, M9T 890
• Exhaust System: for pre-catalytic converter
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 4420748, 82 00 916 762
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-RE-012
• Cable Length [mm]: 400
• Manufacturer: NTY

• Vehicle type: Master T28, Master T33, Master T35, Master T45
• Block Separation:
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 375
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 2
• for OE number: 392102A800
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 690, M9T 890
• Manufacturer Restriction: BOSCH
• Block Separation:
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 350
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 4421234, 82 00 940 349
• Cable Length [mm]: 660
• Number of pins: 2
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV373

• Engine Code: M9T 690, M9T 890
• Block Separation:
• Model Year from: 2012
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 31.1
• Pressure to [kPA]: 372
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400751
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV229

• Engine Code: M9T 690, M9T 890
• Block Separation:
• Model Year from: 2012
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV334

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV333
• Manufacturer: ESEN SKV

• Fitting Position: before soot particulate filter
• for OE number: 226400956R, 226400467R
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 628
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 44
• Gross Weight [g]: 72
• Manufacturer: DENSO

• Housing Type: with housing
• Fabrication Number: EPP-PL-022
• Manufacturer: NTY

• Fitting Position: Exhaust Turbocharger
• Thread Size: M12x1.25
• Cable Length [mm]: 260
• Number of pins: 2
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: after catalytic converter
• Cable Length [mm]: 460
• Number of pins: 2
• Manufacturer: FAST

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV428

• Cable Length [mm]: 430
• Fitting Depth [mm]: 55
• Manufacturer: FAST

• Fitting Position: after soot particulate filter
• Cable Length [mm]: 660
• Number of pins: 2
• Manufacturer: FAST

• Conductor Number: 4
• Length [mm]: 314
• Number of circuits: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 314
• Oxygen Sensor: Heated
• Name: MM OSM302
• Manufacturer: MAGNETI MARELLI

• Exhaust System: before turbocharger
• Engine Code: M9T 690, M9T 890
• for model code: FV0D
• Block Separation:
• Cable Length [mm]: 213
• Number of pins: 2
• Name: DE TS30412-12B1
• Manufacturer: DELPHI

• Fitting Position: before soot particulate filter
• Required quantity: 1
• for OE number: 8200916762
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 430
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 36
• Gross Weight [g]: 64
• Manufacturer: DENSO
• Lisainfo: DET-0142 DENSO
• Additional information: DET-0142 DENSO

• Oxygen Sensor: Regulating Probe, Heated
• Conductor Number: 5
• Resistor [Ohm]: 4.9
• Number of circuits: 5
• Length [mm]: 370
• Cable Length [mm]: 370
• Name: MM OSM281
• Manufacturer: MAGNETI MARELLI

• Emission Standard: Up to Euro 5
• Number of pins: 3
• Number of connectors: 1
• Supplementary Article/Info 2: without connection line
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Number of connectors: 1
• Connector Shape: oval
• for OE number: 227711FE0A
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Manufacturer: JPN

• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• for OE number: 226A42790R
• Length [mm]: 300
• Number of pins: 4
• Manufacturer: FAE

• Engine Code: M9T 690, M9T 890
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Block Separation:
• Model Year from: 2012
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: M9T 690
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Manufacturer: FACET

• Engine Code: M9T 690
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.450
• Manufacturer: EPS

• Engine Code: M9T 690
• Fitting Position: before catalytic converter
• Manufacturer Restriction: BOSCH
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: M9T 690
• Fitting Position: before catalytic converter
• Manufacturer Restriction: BOSCH
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: M9T 690, M9T 890
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Block Separation:
• Model Year from: 2012
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 370
• Name: DE ES21268-12B1
• Manufacturer: DELPHI

• Engine Code: M9T 890
• Construction Year from: 10.2012
• Construction Year to: 12.2015
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• for OE number: 1 701 766
• Connector Shape: D Shape
• Number of pins: 6
• Socket colour: black
• Thread Size: M18 x 1,5
• Weight [kg]: 0.134
• Number of circuits: 5
• Conductor Number: 5
• Length [mm]: 270
• Overall Length [mm]: 410
• Fitting Position: before catalytic converter
• Cable Length [mm]: 270
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor
• Fitting Position: before catalytic converter
• Vehicle type: Master T28
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.