• Switch Pressure [bar]: 0.4
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Thread Size: M14x1,5
• Manufacturer: FAE

• Length [mm]: 50
• Spanner Size: 19
• Housing Colour: blue
• Manufacturer: KAMOKA

• Engine Code: B202I
• Pressure [bar]: 0.3
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 13
• Thread Size: 1/8 NPT
• for OE number: 93290234
• Manufacturer: NRF KLIMATYZACJA

• Pressure [bar]: 0.4
• Thread Size: M14 x 1,5
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Engine Code: B202I
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Construction Year from: 01.1990
• Length [mm]: 45
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.6
• Inner Diameter [mm]: 2.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 11.8
• Spanner Size: 24
• Number of connectors: 1
• Connector Shape: round
• Surface: Zinc-coated
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 4726
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.1993
• Switch Pressure [bar]: 0.5
• Number of pins: 1
• Weight [kg]: 0.039
• Thread Size: M 14 x 1,5
• Pressure [bar]: 0.5
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

Manufacturer: FAE

• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 51
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0124
• Additional information: 21-0124

• Engine Code: B202I
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Manufacturer: FACET

• Engine Code: B202I
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Cable Length [mm]: 22
• Number of pins: 1
• Connecting thread: 1/8'' x 27 NPT
• Manufacturer: ERA

• Construction Year from: 02.1989
• Thread Size: 1/8x27 NPTF
• Manufacturer: VERNET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Colour: blue
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: B202I
• Colour: blue
• Number of pins: 2
• Height [mm]: 51.8
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12x1,5
• Housing Colour: blue
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B202I
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: B202I
• Sensor Type: NTC Sensor
• Thread Size: 1/8"X27 NPTF
• Number of pins: 1
• Thread Type: with tapered thread
• Manufacturer: MEYLE

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: B202I
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Engine Code: B202I
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Length [mm]: 51
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Length [mm]: 51
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 91 7695
• Manufacturer: SWAG
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B202I
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107361
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B202I
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Thread Size: M12x1.5
• Number of pins: 2
• Manufacturer: ERA

• Construction Year to: 08.1992
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594621
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Weight [kg]: 0.05
• Manufacturer: ERA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe
• Number of circuits: 3
• Manufacturer: KAMOKA

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 09.1989
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Manufacturer Restriction: Bosch
• Engine Code: B202I
• Number of circuits: 3
• Overall Length [mm]: 1,270
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 08.1992
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: B202I
• Cable Length [mm]: 1,215
• Manufacturer: DELPHI
• Name: DE ES10242-12B1

• Length [mm]: 1,215
• Number of circuits: 3
• Conductor Number: 3
• Resistor [Ohm]: 4.5
• Cable Length [mm]: 1,215
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Oxygen Sensor: Regulating Probe
• Construction Year to: 08.1992
• Voltage [V]: 12
• Length [mm]: 1,215
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV066
• Manufacturer: ESEN SKV

• Construction Year to: 08.1992
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,250
• Number of circuits: 3
• Manufacturer: ERA

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Oxygen Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 08.1992
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: Bosch
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 08.1992
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Manufacturer Restriction: Bosch
• Number of circuits: 3
• Overall Length [mm]: 1,236
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• for OE number: 75 01 612
• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.