• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 44.9
• Width [mm]: 123
• Thickness [mm]: 17.3
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 17.3 mm
• Additional information: Brake pad set, rear, 17.3 mm

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Rim Size [inch]: 16
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 19.8
• Thickness 2 [mm]: 20.3
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 19.8 mm
• Additional information: Brake pad set, front, 19.8 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 740
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Required quantity: 2
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Required quantity: 2
• Fitting Position: Front Axle, Front Axle Right
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 720
• Weight [kg]: 0.049
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 720
• Required quantity: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: X3025751
• Thickness [mm]: 15.6
• Length [mm]: 62
• Height 1 [mm]: 61
• WVA Number: 21050
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Thickness [mm]: 16.7
• Test Mark: R90 Homologated
• Length [mm]: 123
• Weight [kg]: 0.885
• Height 1 [mm]: 43.6
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• Supplementary Article/Info 2: with piston clip
• WVA Number: 20180, 20181
• Packaging width [cm]: 9.906
• Packaging height [cm]: 6.35
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Required quantity: 2
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 720
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: X3025751
• Quantity per packing unit: 4
• FMSI Code: D709-7614 D811-7686
• Test Mark: E1 90R-011094/470
• WVA Number: 21050
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.8
• Height 1 [mm]: 61
• Height 2 [mm]: 61
• Thickness 1 [mm]: 14.5
• Thickness 2 [mm]: 14.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1441

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Brake System: TEVES
• Height [mm]: 44.8
• Thickness [mm]: 16.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Height [mm]: 44.9
• Width [mm]: 123.1
• Thickness [mm]: 17
• Brake System: ATE
• Manufacturer: LPR

Article number of recommended accessories: KS0015, KS0074, KS0018, KS0020, KS0051, KS0017, KS0021

• Height [mm]: 45
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Fitting Position: Rear Axle
• Width [mm]: 123
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: X3025751
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 61.1
• Thickness [mm]: 14.5
• WVA Number: 21051
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.72
• Manufacturer: VALEO
• Name: VA 301183

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: X3025751
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21051
• Thickness [mm]: 14.5
• Width [mm]: 61.9
• Height [mm]: 61.1
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Height [mm]: 45
• Thickness [mm]: 16.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Article number of recommended accessories: 27-0732
• Width [mm]: 123
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: X3025752
• Length [mm]: 123
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.819
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 156
• Width 2 [mm]: 155
• Height [mm]: 74
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Article number of recommended accessories: KS0021, KS0074, KS0020
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17.3
• Brake System: ATE
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: X3025752
• Length [mm]: 123.1
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.819
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: X3025752
• Rim Size [inch]: 15, 16
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 16.3
• WVA Number: 21934
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.89
• Manufacturer: VALEO
• Name: VA 301753

• Fitting Position: Rear Axle
• Brake System: ATE
• Length [mm]: 123.1
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 44.9
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Alternatively:
• Quantity per packing unit: 4
• FMSI Code: D763-7737
• Test Mark: E1 90R-01878/681
• WVA Number: 21934 21935
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 121.8
• Width 2 [mm]: 122.9
• Height 1 [mm]: 43.7
• Height 2 [mm]: 43.7
• Thickness 1 [mm]: 16.7
• Thickness 2 [mm]: 16.7
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1423
• Additional information: LP1423 DELPHI
• Lisainfo: LP1423 DELPHI

• Vehicle Identification Number (VIN) from: X3025752
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Width [mm]: 123.1
• Height [mm]: 44.9
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Weight [kg]: 0.85
• Manufacturer: TOMEX BRAKES

• Vehicle Identification Number (VIN) from: X3025752
• Length [mm]: 123.1
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 0.819
• Name: SW 20 91 6196
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: X3025752
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Rim Size [inch]: 16
• Fitting Position: Front Axle
• Width 1 [mm]: 156.3
• Height 1 [mm]: 74
• Thickness 1 [mm]: 19.8
• Width 2 [mm]: 155.1
• Height 2 [mm]: 74
• Thickness 2 [mm]: 20.3
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Fitting Position: Front Axle
• Width 1 [mm]: 157
• Width 2 [mm]: 155
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0642
• Additional information: 19-0642

• Vehicle Identification Number (VIN) to: X3025751
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 19.5
• Height [mm]: 74
• Number of wear indicators [per axle]: 2
• Brake System: ATE
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.3
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: X3025752
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Width 1 [mm]: 122.7
• Width 2 [mm]: 123
• Height 1 [mm]: 44.4
• Height 2 [mm]: 44.6
• Thickness [mm]: 17
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Fulfils ECE norm: R90
• Supplementary Article/Info 2: with anti-squeak plate
• Article number of recommended accessories: 109-1097, 109-1123
• Manufacturer: METZGER

Installation Information: For vehicles older than 48 months it is additionally recommended to replace the retaining springs.

• Fitting Position: Rear Axle
• Thickness [mm]: 16.5
• Length [mm]: 123.2
• Height [mm]: 45
• Wear Warning Contact: prepared for wear indicator
• Brake System: Ate-teves
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Width [mm]: 123.2
• Height [mm]: 44.8
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Construction Year to: 08.2005
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Height [mm]: 74.2
• Thickness [mm]: 19.5
• directional:
• Fitting Position: Front Axle
• Width [mm]: 156
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-1405
• Additional information: 19-1405

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Width [mm]: 123.2
• Height [mm]: 45
• Thickness [mm]: 16.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21934
• Brake System: Teves
• Article number of recommended accessories: MBA1123
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Manufacturer: MINTEX

• Construction Year to: 12.2003
• Length [mm]: 155.4, 156.4
• Width [mm]: 74.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 20.3, 19.5
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 2.16
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E1 90R 01025/196
• Height [mm]: 44.9
• Width [mm]: 123.1
• Thickness [mm]: 17
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 16
• Height [mm]: 45
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21934, 21935
• Manufacturer: BREMBO
• Name: BR P 71 006

• Fitting Position: Rear Axle
• Width [mm]: 123.2
• Height [mm]: 44.8
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21934
• Thickness [mm]: 16.3
• Width [mm]: 123.3
• Height [mm]: 44.9
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 17.3
• Test Mark: R90 Homologated
• Width [mm]: 123
• Height 1 [mm]: 45
• Material: Ceramic
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21934
• Packaging length [cm]: 18
• Packaging width [cm]: 10.5
• Packaging height [cm]: 8.5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: X3025751
• Quantity per packing unit: 4
• Thickness [mm]: 15.6
• Test Mark: R90 Homologated
• Width [mm]: 62
• Height [mm]: 61
• Weight [kg]: 0.654
• Height 1 [mm]: 61
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21050
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21934, 21933
• Test Mark: E20 90R-02A0134/011
• Length [mm]: 123.1
• Thickness [mm]: 17
• Height [mm]: 45
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D800-7605 D819-7605
• Test Mark: E1 90R-01881/1259
• WVA Number: 21829 23116 23117
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155
• Height 1 [mm]: 74
• Height 2 [mm]: 73.9
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1731

• Fitting Position: Front Axle
• Width 1 [mm]: 156
• Width 2 [mm]: 155
• Height [mm]: 74
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• directional:
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Width [mm]: 123.1
• Height [mm]: 44.9
• Thickness [mm]: 17
• Test Mark: E9 90R-02A1148/3308
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Width [mm]: 123.2
• Height [mm]: 45
• Thickness [mm]: 16.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21934
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 201-171
• Technical Information Number: T1207
• Name: HE 8DB355009051
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: X3025752
• Width [mm]: 123.2
• Height [mm]: 45
• Thickness [mm]: 16.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21934
• Brake System: Teves
• Article number of recommended accessories: 82029300
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Width 1 [mm]: 155.2
• Width 2 [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Construction Year to: 01.2008
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 19.5
• Height [mm]: 74.5
• Wear Warning Contact: with acoustic wear warning
• Brake Pad: Without Bevelled Edges
• Brake System: Teves
• Length 1 [mm]: 155
• Length 2 [mm]: 156.4
• WVA Number: 21829, 23116, 23117
• Name: SK VKBP80424A
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 17.3
• Test Mark: R90 Homologated
• Width [mm]: 123
• Height [mm]: 43.7
• Weight [kg]: 0.9
• Height 1 [mm]: 43.7
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21934
• Packaging length [cm]: 16.8
• Packaging width [cm]: 9.7
• Packaging height [cm]: 6.2
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0498/0352
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20676, 21828, 21829
• Test Mark: E1 90R-01811/052
• Length [mm]: 156.2
• Thickness [mm]: 19.6
• Height [mm]: 74
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155.3
• Height [mm]: 74
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• WVA Number: 23117
• Brake System: Teves
• Article number of recommended accessories: MBA1180
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.1
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: X3025751
• Width [mm]: 61.3
• Height [mm]: 61
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 23091
• Brake System: Teves
• Technical Information Number: T1206
• Name: HE 8DB355009041
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Construction Year to: 08.2005
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R 01107/054
• Height [mm]: 74.2
• Width [mm]: 156.4
• Thickness [mm]: 19.5
• directional:
• Article number of recommended accessories: PFK302
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 20
• Height [mm]: 74
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Width 1 [mm]: 155
• Width 2 [mm]: 157
• Supplementary Article/Info 2: with piston clip
• directional:
• Number of wear indicators [per axle]: 2
• WVA Number: 23116, 23117, 23123
• Name: BR P 59 048
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Construction Year from: 09.2005
• Quantity per packing unit: 4
• Width [mm]: 156.4
• Height [mm]: 74.2
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 20.3
• Manufacturer Restriction: ATE
• Test Mark: E9 90R 01107/054
• Wear Warning Contact: not prepared for wear indicator
• directional:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Rim Size [inch]: 16
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Rim Size [inch]: 16.0
• Width 1 [mm]: 156.3
• Height 1 [mm]: 74
• Thickness 1 [mm]: 19.8
• Width 2 [mm]: 155.1
• Height 2 [mm]: 74
• Thickness 2 [mm]: 20.3
• Brake System: ATE
• Test Mark: E1 90R-01085/011
• MAPP code available:
• Article number of recommended accessories: 24.8190-0713.2, 24.8190-0714.2, 24.8190-0718.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155.3
• Height [mm]: 74
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• directional:
• WVA Number: 23117
• Brake System: Teves
• Article number of recommended accessories: 82032000
• Observe mounting information:
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 2.1
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Width 1 [mm]: 155.1
• Height 1 [mm]: 74
• Thickness 1 [mm]: 20.3
• Width 2 [mm]: 156.3
• Height 2 [mm]: 74
• Thickness 2 [mm]: 19.6
• Brake System: ATE
• Test Mark: E1 90R-01651/594
• MAPP code available:
• Article number of recommended accessories: 24.8190-0018.2, 24.8190-0718.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning

• Fitting Position: Front Axle
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155.3
• Height [mm]: 74
• Thickness [mm]: 20.2
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• directional:
• WVA Number: 23117
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 201-211
• Weight [kg]: 2.1
• Technical Information Number: T1122
• Name: HE 8DB355008141
• Manufacturer: HELLA PAGID

• Vehicle Identification Number (VIN) from: X3025752
• Rim Size [inch]: 15, 16
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 16.3
• WVA Number: 21934, 21935
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.98
• Manufacturer: VALEO

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: X3025752
• Quantity per packing unit: 4
• Thickness [mm]: 19.6
• Test Mark: R90 Homologated
• Width [mm]: 156
• Height [mm]: 74
• Weight [kg]: 2.26
• Number of wear indicators [per axle]: 2
• Height 1 [mm]: 74
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• Width 1 [mm]: 155
• Supplementary Article/Info 2: with piston clip
• WVA Number: 23116
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• directional:
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Width 1 [mm]: 155
• Width 2 [mm]: 156.4
• Height 1 [mm]: 74.4
• Height 2 [mm]: 74.5
• Thickness [mm]: 19.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Teves
• Fulfils ECE norm: R90
• Supplementary Article/Info 2: with anti-squeak plate
• Article number of recommended accessories: 109-1180
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0352
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Construction Year from: 08.2001
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 20
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with adhesive film
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Construction Year to: 07.2001
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 20
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Braking System: Low dust brake pads
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN