• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe, Finger probe
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Engine Code: B205L
• Model Year from: 2001
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Construction Year to: 08.2000
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2000
• Supplementary Article/Info 2: for lead-free fuel
• Block Separation:
• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: after catalytic converter, before catalytic converter

• Supplementary Article/Info 2: for leaded fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Construction Year to: 12.2000
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 550
• Manufacturer: DELPHI

• Construction Year to: 08.2000
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for leaded fuel
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,300
• Weight [kg]: 0.154
• Name: SW 33 10 3128
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 765
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV639

• Construction Year from: 01.2001
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 300
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Supplementary Article/Info 2: for lead-free fuel
• Block Separation:
• Construction Year from: 09.2000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Construction Year from: 01.2001
• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 08.2000
• Supplementary Article/Info 2: for lead-free fuel
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Length [mm]: 720
• Number of pins: 4
• Socket colour: black
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,045
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 01.2001
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B205L
• Construction Year from: 01.2001
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• for OE number: 4570909, 1367825
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO
• Name: DN DOX-2021

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"

• for OE number: 4570917
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,045
• Number of pins: 4
• Weight [g]: 123
• Gross Weight [g]: 156
• Manufacturer: DENSO
• Name: DN DOX-2022

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
9-5 KOMBI (YS3E), 10
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
9-5 KOMBI (YS3E), 10
(kvaliteediklass: Q)"

• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for leaded fuel
• Number of circuits: 4
• Overall Length [mm]: 1,120
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel
• Number of circuits: 4
• Overall Length [mm]: 700
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 09.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel
• Number of circuits: 4
• Overall Length [mm]: 700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Supplementary Article/Info 2: for lead-free fuel
• Number of circuits: 4
• Overall Length [mm]: 850
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 09.2000
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 975
• Number of pins: 4
• Weight [kg]: 0.162
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.