• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

Fabrication Number: ECT-CH-006

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 740
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT&DORIA

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 580
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Cable Length [mm]: 560
• Sensor Type: Passive sensor
• for OE number: 91 77 221
• Manufacturer: KAMOKA

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: B235E
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• for OE number: 9152245
• Manufacturer: MEAT&DORIA

• Engine Code: B235E
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Housing Colour: light blue
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Housing Colour: blue
• Supplementary Article/Supplementary Info: with seal
• Corresponds to the original part in colour: black, light blue, white
• Manufacturer: METZGER

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: METZGER

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: blue
• Manufacturer: BREMI

• Engine Code: B235E
• Colour: black
• Number of pins: 2
• Manufacturer: VDO

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Fitting Position: inner, Left, Right, outer, Rear, Front
• Construction Year to: 08.2001
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 46
• Length from [mm]: 46
• Width [mm]: 27
• Height [mm]: 44.8
• Colour: black
• Shape: angled
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with seal ring
• Cable Length [mm]: 520
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Required quantity: 1
• Manufacturer: BREMI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 08.2001
• Engine Code: B235E
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.12
• Manufacturer: VALEO
• Name: VA 254028

• Construction Year to: 12.1999
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Cable Length [mm]: 560
• Number of pins: 3
• Resistor [Ohm]: 920
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: B235E
• Length [mm]: 580
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of pins: 3
• Cable Length [mm]: 550
• Fitting Depth [mm]: 24.5
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Fitting Position: Front Axle
• Overall Length [mm]: 960
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: brown
• Cable Length [mm]: 880
• paired article number: 31415
• Weight [kg]: 0.14
• Manufacturer: A.B.S.

• Model Year from: 2002
• Frequency Range [MHz]: 433
• Housing Colour: black
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Model Year from: 2002
• Frequency Range [MHz]: 433
• Housing Colour: grey
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Model Year from: 2002
• Frequency Range [MHz]: 433
• Housing Colour: black
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Supplementary Article/Info 2: with cable
• Length [mm]: 580
• Height [mm]: 24
• Resistor [Ohm]: 1,000
• Number of connectors: 3
• Manufacturer: CALORSTAT BY VERNET

• Engine Code: B235E
• Construction Year from: 09.2000
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Engine Code: B235E
• Construction Year from: 09.2000
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• Model Year from: 2002
• Frequency Range [MHz]: 433
• Housing Colour: Titanium
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Engine Code: B235E
• Construction Year from: 09.2000
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Engine Code: B235E
• Construction Year from: 09.2000
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00466

• Construction Year to: 08.1999, 08.2000
• Lambda Sensor: Regulating Probe, Finger probe
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• for OE number: 55563262
• Manufacturer: MEAT&DORIA

• Engine Code: B235E
• Model Year from: 1999
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 4
• Pressure from [kPA]: 32
• Manufacturer: FAE

• Engine Code: B235E
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• Output Voltage, from [V]: 0.66
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Model Year from: 2002
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: Titanium
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year to: 08.1999
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1999, 09.2000
• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Supplementary Article/Info 2: for lead-free fuel
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Supplementary Article/Info 2: for leaded fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Construction Year to: 12.1999
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,500
• Number of circuits: 4
• Weight [kg]: 0.18
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV
• Lisainfo: 09SKV657 SKV
• Additional information: 09SKV657 SKV

• Construction Year to: 08.2001
• Engine Code: B235E
• Alternatively:
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 1,000
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 254063

• Cable Length [mm]: 560
• Number of pins: 3
• Manufacturer: DELPHI

• Construction Year to: 08.2001
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1999
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 550
• Manufacturer: DELPHI

• Model Year from: 2002
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Model Year from: 2002
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: black
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Construction Year to: 08.2000
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for leaded fuel
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,300
• Weight [kg]: 0.154
• Name: SW 33 10 3128
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: with housing
• Fabrication Number: EPP-SA-000

• Fitting Position: Front Axle
• Required quantity: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI
• Lisainfo: OPEL, SAAB
• Additional information: OPEL, SAAB

• Construction Year from: 01.2000
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 765
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV639

• Lambda Sensor: Heated
• Cable Length [mm]: 640
• Manufacturer: FAST

• Construction Year to: 12.1999
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,240
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV632
• Manufacturer: ESEN SKV

• Construction Year to: 08.2001
• Fitting Position: outer, inner, Left, Right, Rear, Front
• Length [mm]: 46
• Width [mm]: 27
• Height [mm]: 44.8
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Warranty: 3 years warranty
• Weight [kg]: 0.1
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 07.2001
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: B235E
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20315-12B1

Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) to: X3025751
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub, rear
• Additional information: Wheel hub, rear

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Exhaust System: before catalytic converter
• Construction Year from: 01.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: Front
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 09.2000
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1999, 08.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel, for leaded fuel
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

• Construction Year to: 08.1999
• Lambda Sensor: Regulating Probe, Heated
• Supplementary Article/Info 2: for lead-free fuel
• Fitting Position: before catalytic converter
• Length [mm]: 720
• Number of pins: 4
• Socket colour: black
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Planar probe
• Number of pins: 4
• Cable Length [mm]: 1,370
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.1999, 09.2000
• Construction Year to: 08.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Supplementary Article/Info 2: for lead-free fuel
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.1999
• Fitting Position: after catalytic converter
• Cable Length [mm]: 1
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 01.2000
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B235E
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Vehicle Identification Number (VIN) from: X3025769
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 140
• Height 1 [mm]: 152
• Rim Hole Number: 5
• Thread Size: M12 x 1,5
• Bolt Hole Circle Ø [mm]: 110
• Outer Diameter 2 [mm]: 60
• Number of flange connections: 4
• Weight [kg]: 3.4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• for OE number: 4570909, 1367825
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO
• Name: DN DOX-2021

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"