• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

Fabrication Number: ECT-CH-006

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT&DORIA

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207019

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Engine Code: B235R
• Cable Length [mm]: 560
• Sensor Type: Passive sensor
• for OE number: 91 77 221
• Manufacturer: KAMOKA

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: B235R
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• for OE number: 9152245
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: B235R
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Supplementary Article/Info 2: with cable
• Length [mm]: 580
• Height [mm]: 24
• Resistor [Ohm]: 1,000
• Number of connectors: 3
• Manufacturer: CALORSTAT BY VERNET

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 35170 22600, 5826473, 9181538, 22620 1F700
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: METZGER

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: B235R
• Material: Plastic
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 2
• Alternative Repair Kit: 550301
• Manufacturer: ERA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: blue
• Name: CZUJNIK POO½ENIA WAU KORB. SAAB
• Manufacturer: BRM

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: BOSCH

• Fabrication Number: ECM-SA-000
• Number of pins: 4

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10171

• Engine Code: B235R
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: B235R
• Cable Length [mm]: 560
• Number of pins: 3
• Resistor [Ohm]: 920
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Required quantity: 2
• Vehicle Identification Number (VIN) from: W2058626, W7053398
• Fitting Position: Front Axle
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Engine Code: B235R
• Length [mm]: 580
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of pins: 3
• Cable Length [mm]: 550
• Fitting Depth [mm]: 24.5
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Engine Code: B235R
• Model Year to: 2000
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Vehicle Identification Number (VIN) to: X2020000, X7020000
• Block Separation:
• Vehicle Identification Number (VIN) from: X2020001, X7020001
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• for OE number: 55563262
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: W2058625
• Overall Length [mm]: 1,350
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: brown
• Cable Length [mm]: 1,260
• paired article number: 31401
• Weight [kg]: 0.2
• Manufacturer: A.B.S.

• Engine Code: B235R
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 4
• Fitting Depth [mm]: 26.5
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: X2020001, X7020001
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• Cable Length [mm]: 730
• Thread Size: M18 x 1,5
• Weight [kg]: 0.013
• for OE number: 993 606 127 01
• Length [mm]: 850
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 1,000
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 254063

• Cable Length [mm]: 560
• Number of pins: 3
• Manufacturer: DELPHI

• Construction Year to: 12.1999
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 550
• Manufacturer: DELPHI

• Construction Year from: 01.2000
• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Cable Length [mm]: 520
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)"

• Construction Year from: 01.2001
• Housing Type: with housing
• Fabrication Number: EPP-SA-000

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 765
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV639

• Construction Year from: 01.2000
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 300
• Manufacturer: DELPHI
• Name: DE ES20315-12B1

Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 1,000
• Fitting Depth [mm]: 24
• Cable Length [mm]: 580
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009167141
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B235R
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub, rear
• Additional information: Wheel hub, rear

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Construction Year to: 08.2001
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) to: X2020000, X7020000
• Block Separation:
• Vehicle Identification Number (VIN) from: X2020001, X7020001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: W2058626, W7053398
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Construction Year from: 01.2000
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 01.2000
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B235R
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 140
• Height 1 [mm]: 152
• Rim Hole Number: 5
• Thread Size: M12 x 1,5
• Bolt Hole Circle Ø [mm]: 110
• Outer Diameter 2 [mm]: 60
• Number of flange connections: 4
• Weight [kg]: 3.4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Exhaust System: for pre-catalytic converter
• for OE number: 1367825
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO
• Name: DN DOX-2021

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• for OE number: 4570917
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,045
• Number of pins: 4
• Weight [g]: 123
• Gross Weight [g]: 156
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
9-5 KOMBI (YS3E), 10
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
9-5 KOMBI (YS3E), 10
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: X2020000, X7020000
• Number of circuits: 4
• Overall Length [mm]: 1,120
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: X2020001, X7020001
• Number of circuits: 4
• Overall Length [mm]: 700
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 139
• Bolt Hole Circle Ø [mm]: 110
• Number of Teeth, ABS ring: 29
• Rim Hole Number: 5
• Fastening Type: Four-point attachment
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 770
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Required quantity: 1
• Construction Year from: 01.2001
• Voltage [V]: 12
• Number of pins: 3
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM