• Fitting Position: Rear Axle
• Fabrication Number: ZWT-PL-001S
• Manufacturer: NTY
• Name: NTY ZWT-PL-001S

• Model Year to: 2012
• Fitting Position: Rear
• Thread Length [mm]: 100
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 110
• Inner Diameter [mm]: 75
• Name: Laager - K„„ndmik OPEL
• Manufacturer: MAX

• Fabrication Number: AD-PL-009
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY

• Fabrication Number: ZWT-PL-001SK
• Manufacturer: NTY
• Name: NTY ZWT-PL-001SK

• Thickness [mm]: 33
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 109.5
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.16
• Name: Laager - K„„ndmik OPEL VECTRA C
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN): [71012523;], [82045050;], [8G030384;]
• Fitting Position: Right, Front Axle
• Width 1 [mm]: 33
• Outer Diameter 1 [mm]: 114
• Manufacturer: SNR
• Name: SN M253.09

• Material: Plastic
• Outer Diameter [mm]: 109.5
• Width [mm]: 33
• Inner Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.16
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 03 44 503
• Manufacturer: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 110
• Height [mm]: 33
• Bearing Type: Rolling Bearing
• Manufacturer: MEY

Name: Laager - K„„ndmik OPEL ASTRA H/SIGNUM/VECTRA C/ZAFIRA B/ SAAB 9-

• Thickness [mm]: 33
• Inner Diameter [mm]: 75
• Outer Diameter [mm]: 109.5
• Material: Plastic
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.16
• Manufacturer: SWAG
• Name: SW 40 92 7996

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2008
• Model Year to: 2012
• Fitting Position: Front Axle
• Weight [kg]: 0.185
• Packaging length [cm]: 11.5
• Packaging width [cm]: 11.5
• Packaging height [cm]: 3.3
• Manufacturer: FEBEST

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik OPEL
• Manufacturer: LMI

for OE number: 13270705, 3 44 503, 3 44 625, 3 44 665, 51755689, 9191181, 93191295 SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik OPEL A
• Manufacturer: SAA

for OE number: 13270705, 3 44 503, 3 44 625, 3 44 665, 51755689, 9191181, 93191295 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-PL-005
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Lisainfo: Bearing for strut, without bearing, front
• Additional information: Bearing for strut, without bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without ball bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. OPEL P. VECTRA
• Manufacturer: MEY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 802 422
• Name: Laager - K„„ndmik. OPEL P. VECTRA
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance for OE number: 12782216, 12793902, 13178147, 13188763, 13188764, 24435884, 3 44 529, 3 44 536, 3 44 537, 3 44 538, 51755688 SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• Alternative Repair Kit: 31944 01
• Manufacturer: LMI

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance for OE number: 12782216, 12793902, 13178147, 13188763, 13188764, 24435884, 3 44 529, 3 44 536, 3 44 537, 3 44 538, 51755688 SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. OPEL P. VECTRA C 02- BEZ O½YSKA

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Alternative Repair Kit: 49358169
• Supplementary Article/Info 2: without ball bearing
• Name: COC 49358168
• Manufacturer: CORTECO

• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• for OE number: 03 44 537
• Weight [kg]: 1.082
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 12796037
• Name: Laager - K„„ndmik. SAAB T. 9-3 02-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 12796037
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 958
• Thickness [mm]: 39
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 155
• Name: IM 25938
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.23
• Supplementary Article/Supplementary Info: with attachment material
• for OE number: 03 44 537 S2
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. OPEL P. VECTRA
• Manufacturer: FEB
• Lisainfo: 27998 FEBI
• Additional information: 27998 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: CORTECO
• Name: COC 49358169

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR
• Name: SN KB653.11
• Additional information: KB653.11 SNR
• Lisainfo: KB653.11 SNR

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 1.23
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with ball bearing
• Name: SW 40 92 7998
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Front Axle
• Height [mm]: 35
• Outer Diameter 1 [mm]: 155
• Name: SN KBLF418.00
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Supplementary Article/Info 2: with ball bearing
• Fitting Position: Front Axle
• Weight [kg]: 1.086
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Manufacturer: KYB

Name: Laager - K„„ndmik. FIAT P. CROMA/ OPEL SIGNUM, VECTRA C/ SAAB 9-3 1.6-3.2 V6 04.02- LE/PR

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. OPEL P. VECTRA C 02- KPL.Z O½YSKIEM

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Laager - K„„ndmik. OPEL P. VECTRA
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Name: Vedruamordi tugilaager
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BILSTEIN
• Name: BI 12-238088

• Construction Year from: 09.2010
• Construction Year to: 03.2012
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Alternative Repair Kit: 6490046, 6490052
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Quantity per axle: 1
• Supplementary Article/Info 2: with bearing
• General Information: Twin Pack for axle repair
• Manufacturer: SKF