Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Fitting Position: Front Axle
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 82
-
Lisainfo: Bearing for strut,
without bearing, front
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: JP GROUP
- Lisainfo: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Support for shock absorber,
rear, upper
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Tootja: JP GROUP
-
Lisainfo: Support for shock absorber,
rear, upper
- Installatsiooni pool: Esisild
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G47,
G48
- Fitting Position: Rear Axle
- Tootja: JP GROUP
-
Lisainfo: Dust Cover Kit,
shock absorber
-
Installatsiooni pool: esisild vasakul,
esisild paremal - for OE number: 7201592
- Tootja: GSP
- Inner Diameter [mm]: 14
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 0.056
-
Nimetus: Laager,
amorditugilaager - Tootja: TED
-
Fabrication Number: AD-
VW- 010 -
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Tootmise kuupäev alates: 06/
12 - Fitting Position: Front Axle
- for OE number: 1J0412249
- Tootja: SASIC
-
Fitting Position: Front Axle Left,
Front Axle Right - Base body material: Sheet Steel
-
Nimetus: Laager -
Kndmik. VW P. GOLF 4 - Tootja: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Kogus pakendis: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle Left
- Weight [g]: 65
- Bearing manufacturer: IMPERGOM
- Thickness [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
-
Nimetus: IM 32295/
1 - Tootja: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Height [mm]: 13
- Outer Diameter [mm]: 46
- Inner Diameter 1 [mm]: 14
- Tootja: OPTIMAL ZAWIESZENIE
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Kvaliteediklass: PJ
-
Nimetus: Top mount left,
right
-
kombineeritud PR-numbrile: 1ZC,
1ZG - Weight [kg]: 0.081
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Packaging height [cm]: 2.6
- Tootja: FEBEST
- Width [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Tootja: FEBI BILSTEIN
- Lisainfo: FE01111
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
PR-numbri jaoks: G45,
G46, G47, G48 - Fitting Position: Front Axle
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
-
Fitting Position: Front Axle Left,
Front Axle Right -
Nimetus: Laager,
amorditugilaager - Tootja: MAX
-
Fitting Position: Front Axle Right,
Front Axle Left - Tootja: 3RG
- for OE number: 1J0 412 249
- Fitting Position: Front Axle
- Bearing Type: Angular Ball Bearing
- Material: Plastic
- Width [mm]: 13.5
- Outer Diameter [mm]: 45
- Tootja: TRUCKTEC AUTOMOTIVE
- Width [mm]: 14
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Tootja: BLUE PRINT ZAWIESZENIE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Hulk: 2
- Fitting Position: Front Axle
- General Information: suspension strut storage; front; aluminum
- Tootja: VIKA
- Width [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Nimetus: SW 30 54 0001
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Alternative Repair Kit: 80001637
- Weight [kg]: 0.23
- Tootja: CORTECO
- Nimetus: COC 21652788
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Alternative Repair Kit: 108 561
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
- Replace in pairs only:
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Nimetus: Laager -
Kndmik VW GOLF/ PASSAT 91- - Tootja: LMI
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 45
- Inner Diameter [mm]: 14
- Material: Plastic
- for OE number: 1J0 412 249
- Nimetus: Top mount left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"
-
Installatsiooni pool: esisild vasakul,
esisild paremal - for OE number: 1J0 412 331 B
- Tootja: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right - Bearing Type: Angular Ball Bearing
-
Material: Plastic,
Metal - Quantity per axle: 2
-
Alternative Repair Kit: 6490035,
6490247 - Tootja: METZGER
- Fitting Position: Front Axle
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
- Bearing Type: Ball Bearing
- Tootja: MEY
Nimetus: Laager - Kndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-
- Fitting Position: Rear Axle
- for OE number: 1J0 513 025 Q
- for manufacturer number: 2020020
- Tootja: KAMOKA
- Fitting Position: Front Axle
- for OE number: 1H0412303B
- for manufacturer number: 2020030
- Tootja: KAMOKA
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Nimetus: Laager -
Kndmik. VW P. GOLF 4 KPL. - Tootja: MAX
- Installatsiooni pool: Esisild
- Quantity per axle: 2
-
Nimetus: Laager -
Kndmik VW - Tootja: SKF
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Nimetus: Laager -
Kndmik VW P. GOLF 91- PASSAT - Tootja: SAA
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Esisild
- SVHC: No SVHC present!
- Nimetus: Vedruamordi tugilaager
- Tootja: FAG
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Supplementary Article/Info 2: with bearing
-
Fabrication Number: AD-
VW- 006 - Tootja: NTY
-
Nimetus: NTY AD-
VW- 006
- Outer Diameter 1 [mm]: 65
- Height [mm]: 53
- Outer Diameter 2 [mm]: 82
- Fitting Position: Front Axle Right
-
Tootja: SNR /
NTN- SNR/ - Nimetus: SN KBLF410.82
Kerenumber (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]
-
Kerenumber (VIN): [5J-
95032 165;], [5J- 9B601 132;] - Šassii: sportvedrustusega sõidukile
-
Installatsiooni pool: paremal,
vasakul, Esisild - Outer Diameter 1 [mm]: 45
- Width 1 [mm]: 13
- Inner Diameter 1 [mm]: 14
-
Tootja: SNR /
NTN- SNR/ - Nimetus: SN M254.01
- Installatsiooni pool: Esisild
- Tootja: OYODO
-
Fitting Position: Front Axle Right,
Front Axle Left - Supplementary Article/Info 2: without bearing
- Weight [kg]: 0.26
-
Nimetus: DY 73-
24097 - Tootja: DYS
- Fitting Position: Front Axle
- Tootja: ASHIKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- for OE number: 6R0 412 249
-
Nimetus: Laager,
amorditugilaager - Tootja: SAA
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- for OE number: 6R0 412 249
- Tootja: LMI
SVHC: No information available, please contact the manufacturer! Nimetus: Laager - Kndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended:
-
Nimetus: Laager -
Kndmik. VW P. GOLF 4 - Tootja: MEY
- Fitting Position: Front Axle
- Tootja: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Weight [kg]: 0.237
- Required quantity: 2
- Thickness [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Tootja: VIKA
- Fitting Position: Front Axle
- Tootja: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Tootja: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Tootja: CORTECO
- Nimetus: COC 80001637
- Inner Diameter [mm]: 26
- Height [mm]: 54
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.237
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
-
Nimetus: Laager -
Kndmik. VW P. GOLF 4 - Tootja: FEB
- Lisainfo: FE09227
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Tootja: AUTO-
GH
- Fitting Position: Front Axle
- Tootja: JAPKO
-
Tootmise kuupäev alates: 06/
12 - Mounting Type: Rubber Mount
- Fitting Position: Front Axle
- for OE number: 1J0412331C
- Tootja: SASIC
- Height [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.237
- Supplementary Article/Info 2: without ball bearing
- Nimetus: SW 30 54 0012
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0412331
- Fitting Position: Front Axle
- Required quantity: 2
-
Material: Rubber/
Metal - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
- Weight [g]: 273
- Supplementary Article/Info 2: without bearing
- Thickness [mm]: 54
- Nimetus: IM 32354
- Tootja: ORIGINAL IMPERIUM
-
PR-numbri jaoks: 1JB,
1JA - Fitting Position: Rear Axle
- Tootja: MAX
Šassii: tavavedrustusega sõidukile, für Fahrzeuge mit Schlechtwegeausführung Nimetus: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 11
-
Fabrication Number: AD-
VW- 018 - Tootja: NTY
-
Nimetus: NTY AD-
VW- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Housing Type: Aluminium Housing
- Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Esisild
- SVHC: No SVHC present!
- Nimetus: LU 815008930
- Tootja: FAG
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without ball bearing
-
Alternative Repair Kit: 25346 01,
36957 01 -
for OE number: 1J0 412 331,
1J0 412 331 B, 1J0 412 331 C -
Nimetus: Laager -
Kndmik. VW P. GOLF 4 (BEZ O½YSKA) - Tootja: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Nimetus: CFD PK4710
- Tootja: DACO
- PR-numbri jaoks: 1JB
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Housing Type: Aluminium Housing
- Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G45,
G46 -
Fitting Position: Front Axle Left,
Front Axle Right
- Fitting Position: Front Axle
- Quantity Unit: Set
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Hulk: 2
- Weight [kg]: 0.237
- Fitting Position: Front Axle
- Thickness [mm]: 54
- Required quantity: 2
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Tootja: BORSEHUNG
- Fitting Position: Rear Axle
- Weight [kg]: 0.28
- Required quantity: 2
- Tootja: TEDGUM
- Hulk: 2
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Tootja: VIKA
- Šassii: tavavedrustusega sõidukile
- Fitting Position: Rear Axle
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: MAX
-
Lisainfo: 72-
1220
-
for OE number: 1J0 412 331,
1J0 412 331 B, 1J0 412 331 C - Fitting Position: Front Axle both sides
- Supplementary Article/Info 2: without ball bearing
- Nimetus: Suspension strut support bearing left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Tootja: KAMOKA AMORTYZATORY
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G45,
G46 - Fitting Position: Front Axle
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: MAX
- Hulk: 2
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Tootja: VIKA
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"
- Nimetus: Suspension strut support bearing left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Tootja: ASHIKA
- Fitting Position: Rear Axle
- Tootja: KAMOKA AMORTYZATORY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Weight [kg]: 0.28
- Tootja: CORTECO
- Nimetus: COC 80000230
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Material: Rubber/
Metal - Supplementary Article/Info 2: with bearing
- Required quantity: 2
- Height [mm]: 53
- Outer Diameter [mm]: 83
- Centering Diameter [mm]: 14.2
- Tootja: TRW
for OE number: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- Shape: round
- Nimetus: CFD PK4720
- Tootja: DACO
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left -
Tootja: AUTO-
GH
- Installatsiooni pool: Tagasild
- Šassii: tavavedrustusega sõidukile
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G47,
G48 - Fitting Position: Front Axle
-
Nimetus: Tolmukaitse komplekt,
Amordid - Tootja: MAX
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: POLCAR
SEAT CORDOBA (6K2)
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
-
Mounting Type: Rubber-
Metal Mount - Required quantity: 2
- replacement in pairs recommended:
- Nimetus: Vedruamordi tugilaager
- Tootja: MEY
- Fitting Position: Front Axle
- for OE number: 1H0412303B
- Tootja: KAMOKA AMORTYZATORY
-
PR-numbri jaoks: 1JB,
1JA - Fitting Position: Rear Axle
-
Nimetus: Laager -
Kndmik. VW T. GOLF 4/ B - Tootja: MAX
Šassii: tavavedrustusega sõidukile, für Fahrzeuge mit Schlechtwegeausführung
- Fitting Position: Rear Axle
- Shape: round
- Tootja: KAMOKA
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: POLCAR
SKODA FELICIA I (6U1
(kvaliteediklass: Q)"
- Installatsiooni pool: Tagasild
- Fitting Position: Rear Axle both sides
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
IBIZA/LEON/FABIA
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Shape: round
- for OE number: 1J0513425
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: MAX
- Hulk: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Tootja: VIKA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 1J0 513 353 B,
6R0 513 353, 6R0 513 353 B - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Nimetus: Vedruamordi tugilaager
- Tootja: SAA
SVHC: No information available, please contact the manufacturer!
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Tootja: MAX
Nimetus: ZESTAW MONTA½OWY AMORTYZATORA VW P. BORA/VENTO/IBIZA 97- (ODBOJE OSONY)
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: LMI
SVHC: No information available, please contact the manufacturer! Nimetus: Laager - Kndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM
- Installatsiooni pool: Esisild
-
Article number of recommended accessories: 510213S,
512244S, 510070, 512244 - Tootja: GSP ZAWIESZENIE
-
Fitting Position: Front Axle Right,
Front Axle Left - for OE number: 344417
- Tootja: AUTOFREN SEINSA
-
Nimetus: SE D5-
048
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 1J0 513 353 B,
6R0 513 353, 6R0 513 353 B - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Tootja: LMI
SVHC: No information available, please contact the manufacturer! Nimetus: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Fitting Position: Front Axle
- Technical Information: Suspension mounting + separated suspension bearing
- Tootja: KYB
Nimetus: Laager - Kndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA
(kvaliteediklass: PJ)"
- Installatsiooni pool: Tagasild
- Šassii: tavavedrustusega sõidukile
- Fitting Position: Rear Axle both sides
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"
- Number of Parts [parts]: 2
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Fitting Position: Front Axle Right,
Front Axle Left - Tootja: SNR
- Nimetus: SN KB657.08
- Hulk: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.28
- Required quantity: 2
-
Material: Aluminium,
Rubber/ Metal - General Information: Shock absorber upper cover
- Tootja: VIKA
- Fitting Position: Rear Axle
- Tootja: ASHIKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with ball bearing
- Outer Diameter [mm]: 83
- Quantity per axle: 2
- Tootja: METZGER
- Installatsiooni pool: Esisild
- Supplementary Article/Info 2: with rolling bearing
- Guarantee: 5 years guarantee
- Weight [kg]: 0.4
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Packaging height [cm]: 9
- Tootja: MONROE
- Installatsiooni pool: Esisild
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Nimetus: Vedruamordi tugilaager
- Tootja: SKF
- Fitting Position: Rear Axle
- Tootja: KAVO PARTS
- Fitting Position: Rear Axle
- Weight [g]: 280
- General Information: Shock absorber upper cover
- Tootja: BORSEHUNG
- Lisainfo: 1J0513353G BOR
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: POLCAR
SEAT LEON (1M1)
(kvaliteediklass: Q)"
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Tootja: KAVO PARTS
- Fitting Position: Rear Axle
- Tootja: JAPKO
- Installatsiooni pool: Tagasild
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Nimetus:
- Tootja: SKF
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: POLCAR
SKODA OCTAVIA (1U2)
(kvaliteediklass: Q)"
- kombineeritud PR-numbrile: 1JA+1JB
- Length [mm]: 125
- Inner Diameter [mm]: 29
- Height [mm]: 58
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Kogus pakendis: 2
- Fitting Position: Front Axle
- Tootja: KAVO PARTS
- kombineeritud PR-numbrile: 1JA+1JB
- Length [mm]: 125
- Inner Diameter [mm]: 29
- Height [mm]: 58
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: with ball bearing
- Nimetus: SW 32 91 9274
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Supplementary Article/Info 2: without bearing
- Guarantee: 5 years guarantee
- Weight [kg]: 0.3
- Packaging length [cm]: 13.6
- Packaging width [cm]: 11.8
- Packaging height [cm]: 11.4
- Tootja: MONROE
- Fitting Position: Rear Axle
- Weight [kg]: 0.29
-
Nimetus: ZESTAW MONTA½OWY AMORTYZATORA VW T. POLO 10-
22 - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Tootja: MAGNETI MARELLI
- Nimetus: MM APK0068
- Fitting Position: Rear Axle
-
Nimetus: Tolmukaitse komplekt,
Amordid - Tootja: JPA
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 198
- Component Number: 4
- Nimetus: IM 50130
- Tootja: ORIGINAL IMPERIUM
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Guarantee: 5 years guarantee
- for OE number: 357413175A
- Weight [kg]: 0.3
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Tootja: MONROE
- Fitting Position: Front Axle
- Weight [kg]: 0.308
- Packaging length [cm]: 20.5
- Packaging width [cm]: 15.5
- Packaging height [cm]: 8
- Tootja: FEBEST
- kombineeritud PR-numbrile: G45+G46
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.5
-
Nimetus: PUHVER,
VEDRUSTUS - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Shape: round
- Tootja: DENCKERMANN AMORTYZATORY
- kombineeritud PR-numbrile: G45+G46
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.201
- Nimetus: SW 30 56 0029
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- kombineeritud PR-numbrile: G45+G46
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.201
-
Nimetus: PUHVER,
VEDRUSTUS - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Tootja: SACHS AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Tootja: LMI
SVHC: No information available, please contact the manufacturer! Nimetus: Laager - Kndmik. AUDI A1 (8X1, 8XK), 1.2 TFSI, 1.4 TFSI, 1.6 TDI, 2.0 TDI, 2.0 TFSI QUATTRO, A1 SPORTBACK (8XA, 8XF), 1.2 TFSI, 1.4 TFSI,
-
Kerenumber (VIN): [1J-
Y- 500 001;] -
Installatsiooni pool: paremal,
vasakul, Tagasild - Number of Parts [parts]: 1
- Width 1 [mm]: 57
- Outer Diameter 1 [mm]: 64
- Tootja: SNR
- Nimetus: SN KB957.03
- Installatsiooni pool: Esisild
- Weight [kg]: 35
- Shape: round
- Height of bump stop [mm]: 65
- Inner Diameter [mm]: 18
- Tootja: DENCKERMANN AMORTYZATORY
- Kogus pakendis: 2
- Fitting Position: Rear Axle
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: KYB
- Fitting Position: Front Axle
- for OE number: 357412303F
- Tootja: AUTOFREN SEINSA
-
Nimetus: SE D5-
221
- Fitting Position: Rear Axle
- Shape: round
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Weight [kg]: 0.352
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 5.2
- Tootja: FEBEST
- Fitting Position: Rear Axle
-
Nimetus: Tolmukaitse komplekt,
Amordid - Tootja: MAX
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Guarantee: 5 years guarantee
- Shape: round
- Weight [kg]: 0.4
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Tootja: MONROE
- Lisainfo: PK078 MONROE
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Fitting Position: Rear Axle
- Height [mm]: 58
- Required quantity: 2
- Material: Aluminium
- Outer Diameter [mm]: 63
- Centering Diameter [mm]: 11
- for OE number: 1J0 513 353 D
- Tootja: TRW SPREZYNY PODUSZKI AMORTYZATORA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Shape: round
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: MEY
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 61
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
PR-numbri jaoks: G45,
G46 - Plokieraldus:
- Length [mm]: 300
- Width [mm]: 80
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Weight [kg]: 0.16
-
Nimetus: Puhver,
vedrustus - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Nimetus: Laager -
Kndmik. VW P. GOLF 4 KPL. - Tootja: BIL
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G47,
G48 -
Nimetus: Tolmukaitse komplekt,
Amordid - Tootja: SAA
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Esisild
- Šassii: tugevdatud šassiiga sõidukile
- Kogus pakendis: 2
- Quantity per axle: 1
- Nimetus: SK VKDP33346T
- Tootja: SKF
- Fitting Position: Rear Axle
- Height [mm]: 143
- Weight [kg]: 0.34
- Packaging length [cm]: 17.2
- Packaging width [cm]: 11.6
- Packaging height [cm]: 5.8
- Tootja: FEBEST
- kombineeritud PR-numbrile: 1JA+1JB
- Fitting Position: Rear Axle
- Weight [kg]: 0.462
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: without ball bearing
-
Nimetus: Remondikomplekt,
vedruamordi tugilaager - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Šassii: tavavedrustusega sõidukile
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: MEY
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; front; 2 pcs
- Tootja: BORSEHUNG
- Installatsiooni pool: Tagasild
- Šassii: tavavedrustusega sõidukile
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: SAA
SVHC: No information available, please contact the manufacturer!
- Šassii: tavavedrustusega sõidukile
-
PR-numbri jaoks: G45,
G46 - Fitting Position: Front Axle
-
Nimetus: TOLMUKAITSE KOMPLEKT,
AMORDID - Tootja: SAA
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Height [mm]: 144
- Quantity per axle: 1
- Inner Diameter 1 [mm]: 13.25
- Inner Diameter 2 [mm]: 14.5
- Nimetus: SK VKDP43113T
- Tootja: SKF
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.349
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Tootja: MONROE
- Quantity: 2
- Fitting Position: Rear Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; rear; 2 pcs
- Tootja: BORSEHUNG
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: BILSTEIN
AUDI/VW/SEAT/SKODA
(kvaliteediklass: Q)"
- Nimetus: Shock absorber protection kit left+right
- Kvaliteediklass: Q
Lisainfo: "Tootja: BILSTEIN
GOLF IV
(kvaliteediklass: Q)"
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog