• Fitting Position: Rear Axle
• Height [mm]: 180
• Tootja: JP GROUP
• Lisainfo: Protection sleeve for shock absorber, rear

• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 162
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• Tootja: MAX

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• Fitting Position: Front Axle
• Height [mm]: 215
• Material: Thermoplast
• Tootja: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 222
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Tootmise kuupäev alates: 06/12
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 222
• for OE number: 357413175A
• Tootja: SASIC

• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Nimetus: SW 30 60 0038
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 160
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.041
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Tootja: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: LMI

SVHC: No information available, please contact the manufacturer! Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/PASSAT/VENTO

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 667
• Length 2 [mm]: 436
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fabrication Number: A-VW-037
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Replace in pairs only:
• Tootja: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Tootja: KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN FILTRY

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Nimetus: Amort
• Tootja: MAX

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA-AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Tootja: KAVO PARTS

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Plate
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5793

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Kvaliteediklass: PJ
• Nimetus: Gas shock absorber

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Article number of recommended accessories: 100 740 0007, 100 741 0111
• Replace in pairs only:
• Nimetus: Amort
• Tootja: MEY

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0144
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0144
• Shock Absorber Mounting Type: Top pin
• Tootja: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: MK118, PK078
• Weight [kg]: 1.768
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Tootja: BILSTEIN
• Nimetus: BI 19-230573

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 51
• Length 1 [mm]: 509
• Length 2 [mm]: 361
• Piston Rod Diameter [mm]: 22
• Quantity per axle: 1
• Tootja: TRW
• Lisainfo: JGM1082T

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Tootja: KAVO

• Installatsiooni pool: Tagasild
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV27/11X207A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY
• Lisainfo: 1266230014

Article number of recommended accessories: 100 640 0006, 100 412 2019/S, 100 412 0019, 100 412 1019/S, 100 412 0019/S

• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 507
• min. length [mm]: 353
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M14X150
• Tootja: SNR AMORTYZATORY

• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 360
• Length 2 [mm]: 510
• Bore Diameter [mm]: 32
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK077, MK344, PK076
• Weight [kg]: 3.85
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SM0144
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Installatsiooni pool: Esisild
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE32/22X150A
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: KYB

• Šassii: sportvedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: KYB

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• max. length [mm]: 583
• min. length [mm]: 428
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M14X150
• Nimetus: SN SA65443.28
• Tootja: SNR

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Tootja: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
SEAT IBIZA/VW POLO
(kvaliteediklass: Q)"

• Šassii: sportvedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Single Tube Upside Down
• Tootja: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"