• Colour Coding: grey
• Number of pins: 2
• Lisainfo: Sender for water temperature gauge, 2 pins

• for OE number: 95510612500
• Tootja: KAMOKA

• Fabrication Number: ECC-AU-003
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Info 2: with seal ring
• Socket colour: green
• Number of pins: 1
• Tootja: NTY
• Nimetus: NTY ECC-AU-003

• Fabrication Number: ECC-AU-009
• Thread Size: M10x1,0
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Socket colour: blue
• Nimetus: NTY ECC-AU-009
• Tootja: NTY

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 1
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Surve (bar): 2,5
• Üldine informatsioon: oil pressure switch；2.5Bar
• Tootja: VIKA

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Tootja: NTY
• Nimetus: NTY ECT-VW-000

• Fitting Depth [mm]: 29
• Housing Colour: black
• Tootja: KAMOKA

• Hulk: 1
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: must
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; black
• Tootja: VIKA

• Pressure [bar]: 6
• Housing Colour: green
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Nimetus: OLISURVELšLITUS
• Tootja: DLP
• Lisainfo: SW90024

• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Tootja: NTY
• Nimetus: NTY ECT-VW-002

• Üldine informatsioon: oil pressure switch
• Tootja: VIKA

• Hulk: 1
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: hall
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; grey; 2 pins
• Tootja: VIKA

• Mootorikood: CZCA
• Värv: roheline
• Surve (bar) kuni: 0,6
• Surve alates (bar): 0,3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Nimetus: OLISURVELšLITUS
• Tootja: EPS

• Mootorikood: CZCA
• Värv: roheline
• Surve (bar) kuni: 0,6
• Surve alates (bar): 0,3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Tootja: FACET

• Switch Pressure [bar]: 0.5
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Tootja: VERNET

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 2
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Colour Coding: grey
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Pressure [bar]: 2.6
• Housing Colour: black
• Thread Size: M10*1.5
• Spanner Size: 24
• Number of pins: 1
• Tootja: DELPHI
• Nimetus: DE SW90061

• Number of pins: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Socket Width [mm]: 1.5
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with cable
• Nimetus: Kaabli remondikomplekt, olirohuandur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Hulk: 1
• General Information: oil pressure switch
• Tootja: BORSEHUNG

• Switch Pressure [bar]: 2.5
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Tootja: VERNET

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Number of pins: 1
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Nimetus: Olisurvellitus
• Tootja: HEL

• Pressure [bar]: 2.5
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Tootja: ERA

• Piirangutega toode/piirangu info 2: koos klemmihoidjaga
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: CZCA
• Värvimarkeering: hall
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Tootja: ERA

• Mootorikood: CZCA
• Värvimarkeering: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Thread Size: M 10 x 1
• Control Range [bar]: 0,3-0,6
• Weight [kg]: 0.033
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Mootorikood: CZCA
• Värv: sinine
• Surve (bar) kuni: 2,95
• Surve alates (bar): 2,15
• Pressure [bar]: 2.5
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: violet
• Nimetus: EP 1.800.192
• Tootja: EPS

• Mootorikood: CZCA
• Värv: sinine
• Surve (bar) kuni: 2,95
• Surve alates (bar): 2,15
• Pressure [bar]: 2.5
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: violet
• Tootja: FACET

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Tootja: NTY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 30 92 9318
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Värvimarkeering: hall
• Vastab originaalosa värvile: must
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Versioon: IAM
• soovitava lisavarustuse artiklinumber: 0899250, 0905513
• Võimsus [W]: 0,06
• Tootja: METZGER

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03F919501A
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Hulk: 1
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Number of connectors: 2
• Colour Coding: grey
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• Hulk: 1
• Kaal (kg): 0,48
• Ühenduste arv: 2
• Värv: must
• Üldine informatsioon: knock sensor
• Tootja: VIKA

• Mootorikood: CZCA
• Korpusevärv: must
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Mootorikood: CZCA
• Korpusevärv: must
• Tootja: FACET

• Versioon: 1
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Hulk: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 030 905 377 C, YM21 12A699 BA
• Tootja: MEAT&DORIA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Tootja: NTY

• for OE number: 03F 919 501 B
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: TRU

• Hulk: 1
• Number of pins: 3
• Fitting Depth [mm]: 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Number of pins: 2
• Housing Colour: grey
• Tootja: FAE ELEKTRYKA

• Number of connectors: 2
• Tootja: ERA

• General Information: camshaft position sensor
• Tootja: BORSEHUNG

• Fabrication Number: ECP-AU-039
• Number of pins: 3
• Sensor Type: Active sensor
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Tootja: NTY
• Nimetus: NTY ECP-AU-039

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Nimetus: SW 30 10 6571
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hulk: 1
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11473

• Pressure [bar]: 2.5
• Combi Switch Function: Normally Closed Contact
• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

• Käigukasti liik: Poolautomaatne, Käigukast
• Kastitüüp: B5
• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Number of connectors: 3
• Weight [kg]: 0.023
• for OE number: 04C 906 433 G
• Supplementary Article/Info 2: with screw
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Mootorikood: CZCA
• Nimetus: EP 1.957.144
• Tootja: EPS

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 03F919501B, 04E919501C

• Number of connectors: 3
• Weight [kg]: 0.023
• for OE number: 04C 906 433 G
• Supplementary Article/Info 2: with screw
• Nimetus: SW 33 10 2812
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Tootja: DELPHI ELEKTRONIKA

• Üldine informatsioon: hall sender camshaft
• Tootja: VIKA

• Sensor Type: Hall Sensor
• Tootja: FAE ELEKTRYKA

• Mootorikood: CZCA
• vajaminev tükihulk: 1
• Nimetus: EP 1.953.793
• Tootja: EPS

Tootja: MAGNETI MARELLI

• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Üldine informatsioon: impulse sender; crackshaft
• Tootja: VIKA

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

Tootja: MAGNETI MARELLI

• Üldine informatsioon: speedometer
• Tootja: VIKA

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551675
• Tootja: ERA

• Tehnilisi andmeid jälgida:
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, tagatuli
• Tootja: HBE

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-016
• Tootja: NTY