• Number of pins: 2
• Connector Shape: D Shape
• Tootja: JP GROUP A/S
• Lisainfo: Coolant Temperature Sensor

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Nimetus: NIVOOLšLITI, PESUVEEKOGUS
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour Coding: grey
• Number of pins: 2
• Tootja: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins

• for OE number: 95510612500
• Tootja: KAMOKA

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Conductor Number: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: Kaabli paranduskomplekt, v„listemperatuuri andur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Hulk: 1
• Weight [kg]: 0.015
• Number of connectors: 2
• Screw length below head [mm]: 20
• Colour: black
• Colour Coding: grey
• General Information: temperature sensor; black
• Tootja: VIKA

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Tootja: NTY
• Nimetus: NTY ECT-VW-000

• Fitting Depth [mm]: 29
• Housing Colour: black
• Tootja: KAMOKA

• Connector Shape: oval, D Shape
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Number of pins: 2
• Consult accessories list for recommended additional repairs:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Tootja: NTY
• Nimetus: NTY ECT-VW-002

• Number of pins: 2
• Connector Shape: rectangular
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: temperature sensor
• Tootja: VIKA

• Hulk: 1
• Number of mounting bores: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 9
• Colour Coding: green
• Housing Colour: black
• Connector Shape: D Shape, oval
• General Information: temperature sensor
• Tootja: VIKA

• Colour Coding: grey
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Fabrication Number: ECT-AU-003
• Tootja: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Weight [g]: 15
• Nimetus: IM 5309
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Front
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV702

• Number of pins: 2
• Connector Shape: rectangular
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour: black
• Fitting Position: Front
• Weight [kg]: 0.004
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06A 919 501
• Tootja: TRUCKTEC

• Mootorikood: CYVB
• Värvimarkeering: hall
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: CYVB
• Värvimarkeering: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Supplementary Article/Info 2: with clamp holder
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Tootja: ERA

• General Information: temperature sensor
• Tootja: VIKA

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Fabrication Number: ECT-VW-007
• Tootja: NTY
• Nimetus: NTY ECT-VW-007

• General Information: external temperature sensor
• Tootja: BORSEHUNG

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• PR-numbri jaoks: 9AK, KH6
• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: rectangular, angled
• Housing material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 5Q0 907 543A
• Mounting Type: Clipped
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Nimetus: SW 30 92 9318
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour Coding: grey
• Corresponds to the original part in colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0899250, 0905513
• Power [W]: 0.06
• Tootja: METZGER

• Hulk: 1
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Number of connectors: 2
• Colour Coding: grey
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• Fitting Position: Front
• Number of pins: 2
• Power [W]: 0.06
• Tootja: METZGER

• Mootorikood: CYVB
• Korpusevärv: must
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Mootorikood: CYVB
• Korpusevärv: must
• Tootja: FACET

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03F919501A
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Number of pins: 2
• Colour: black
• Tootja: METZGER

• Hulk: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 03F 919 501 B
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: TRU

• Versioon: 1
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, tagatuli
• Tootja: HBE

• Number of pins: 3
• Connector Shape: D Shape
• Shape: angled
• Number of mounting bores: 1
• Supplementary Article/Info 2: with screw, without cable
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Nimetus: SW 30 10 6571
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECP-AU-039
• Number of pins: 3
• Sensor Type: Active sensor
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Tootja: NTY
• Nimetus: NTY ECP-AU-039

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• PR-numbri jaoks: 9AK, KH6
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer Restriction: Am Verdampfer
• Power [W]: 0.06
• Tootja: METZGER

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.023
• Supplementary Article/Info 2: with screw
• for OE number: 04C 906 433 G
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: grey
• Tootja: FAE

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 03F919501B, 04E919501C

• Number of pins: 3
• Nimetus: DE SS11482
• Tootja: DELPHI

• Number of connectors: 3
• Weight [kg]: 0.023
• for OE number: 04C 906 433 G
• Supplementary Article/Info 2: with screw
• Nimetus: SW 33 10 2812
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with screw
• Number of pins: 3
• Nimetus: Andur, v„ntvoll
• Tootja: MEY

• Mootorikood: CYVB
• Käigukasti liik: Käigukast
• Nimetus: ANDUR,P™™RDED
• Tootja: EPS

• Mootorikood: CYVB
• Käigukasti liik: Käigukast
• Tootja: FACET

• Mootorikood: CYVB
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Tootja: MEYLE

• General Information: impulse sender; crackshaft
• Tootja: VIKA

Tootja: MAGNETI MARELLI

• PR-numbri jaoks: 9AK
• Number of pins: 2
• Vehicle Equipment: for vehicles with automatic climate control
• Tootja: METZGER

• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Tootja: BREMI

• General Information: Transmission speed sensor
• Tootja: VIKA

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551675
• Tootja: ERA

• General Information: impulse sender crankshaft
• Tootja: BORSEHUNG

• Number of pins: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: oval
• Colour: light grey
• Supplementary Article/Info 2: without cable
• for OE number: 04C906433
• Tootja: MEAT&DORIA

• Fabrication Number: EPO-AU-011
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Connector Shape: D Shape
• Tootja: NTY

• Ehitusaasta kuni: 08.2018
• Sõidukivarustus: Konditsioneeriga sõidukile
• Tootja: VALEO

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,MOOTORIOLITASE
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CYVB
• Korpusevärv: must
• Sensor Length [mm]: 80
• Tootja: FACET

• Mootorikood: CYVB
• Korpusevärv: must
• Sensor Length [mm]: 80
• Tootja: EPS

• General Information: oil level sensor
• Tootja: VIKA