Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Installatsiooni pool: Tagasild
- Ehitusaasta kuni: 04.1999
- PR-numbri jaoks: 1KK
- Kerenumber (VIN) kuni: 6K_X_289999
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
-
Kõrgus (mm): 71,
5 - Veljeaukude hulk: 4
- Piduriketta liik: täis
-
Tsentri läbimõõt (mm): 39,
9 - Pealispind: õlitatud
-
Piirangutega toode/piirangu info 2: koos ABS-
andurirõngaga -
Netokaal [kg]: 4,
44 - Lisainfo: 1tk. juurde tellida ei saa
- Kogus pakendis: 2
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
-
Kõrgus (mm): 38,
7 - Veljeaukude hulk: 4
- Piduriketta liik: õhutusega
- Tsentri läbimõõt (mm): 65
- Pealispind: õlitatud
-
Netokaal [kg]: 3,
63 - Lisainfo: 1tk. juurde tellida ei saa
- Kogus pakendis: 2
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
-
Kõrgus (mm): 38,
8 - Veljeaukude hulk: 4
- Piduriketta liik: õhutusega
- Tsentri läbimõõt (mm): 65
- Pealispind: õlitatud
-
Netokaal [kg]: 4,
36 - Lisainfo: 1tk. juurde tellida ei saa
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
-
Kõrgus (mm): 38,
8 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
-
Aukude arv: 1,
4 - Välisläbimõõt [mm]: 256
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
- Pealispind: kaetud
Lisainfo: Seat Arosa 00->04, Cordoba 93->02, Ibiza 93->02, Inca 95->03, Toledo 91->99, VW Caddy 95->04, Corrado 89->95, Golf 86->02, Jetta 86->91, Lupo 98->05, Passat 84->97, Polo 95->02, Scirocco 85->92, Vento 91->98
- PR-numbri jaoks: 1LM
- Installatsiooni pool: Esisild
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 12
- Aukude arv: 4
- Pealispind: kaetud
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1KD,
1KS - Piduriketta liik: täis
- Välisläbimõõt [mm]: 230
- Pidurikettajämedus [mm]: 9
- Installatsiooni pool: Tagasild
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 39
- Aukude arv: 5
- Ava Ø (mm): 100
- Miinimumjämedus (mm): 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
0749
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Height [mm]: 40.3
- Brake Disc Thickness [mm]: 9
- Outer Diameter [mm]: 230
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Tootja: JPN
-
Lisainfo: 40H9010-
JPN
- Ehitusaasta alates: 05.1999
- Kerenumber (VIN) alates: 6KX290000
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Brake Disc Type: solid
- Rim Hole Number: 4
- Height [mm]: 39.4
- Brake Disc Thickness [mm]: 9
- Outer Diameter [mm]: 232
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 135
- Tootja: JPN
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 12
- Installatsiooni pool: Esisild
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 35
- Aukude arv: 4
- Ava Ø (mm): 100
- Miinimumjämedus (mm): 10
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Ehitusaasta alates: 05.1999
- Kerenumber (VIN) alates: 6KX290000
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Piduriketta liik: täis
- Välisläbimõõt [mm]: 232
-
Pidurikettajämedus [mm]: 8,
9 - Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
4 - Aukude arv: 4
- Ava Ø (mm): 100
- Piirangutega toode/piirangu info 2: koos kruvidega
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LA
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 10
- Aukude arv: 4
- Pealispind: kaetud
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Piduriketta liik: täis
- Välisläbimõõt [mm]: 230
- Pidurikettajämedus [mm]: 9
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 39
- Aukude arv: 5
- Ava Ø (mm): 100
- Pealispind: värvitud
- Miinimumjämedus (mm): 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
0749MAX
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Ehitusaasta kuni: 05.1999
-
Kerenumber (VIN) alates: 6K-
X- 290000 - Minimum thickness [mm]: 7
- Brake Disc Type: solid
- Bore Diameter [mm]: 13.6
- Brake Disc Thickness [mm]: 9
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Inner Diameter [mm]: 125
- Height [mm]: 39.5
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 232
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 10
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 38,
6 - Aukude arv: 4
- Ava Ø (mm): 100
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 8
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 20
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 38,
7 - Aukude arv: 4
- Ava Ø (mm): 100
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 18
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Ehitusaasta kuni: 05.1999
-
Kerenumber (VIN) alates: 6K-
X- 290000 - Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 9
- Ava Ø (mm): 100
- Aukude arv: 4
- Kõrgus (mm): 40
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Välisläbimõõt [mm]: 232
- Tootja: KAMOKA
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
- Piduriketta liik: täis
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0250/ 1192 - Pealispind: kaetud
- Välisläbimõõt [mm]: 232
- Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
5 - Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3034C
- PR-numbri jaoks: 1LG
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 20
- Aukude arv: 4
- Pealispind: kaetud
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LM
- Kogus pakendis: 2
- Piduriketta liik: täis
- Pealispind: kaetud
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 12
- Kõrgus (mm): 35
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Kontrolltähistus: ECE R90 APPROVED
- Miinimumjämedus (mm): 10
-
Kaal (kg): 3,
2 -
Puurpilt/auguarv: 5/
4 - Tootja: ZIMMERMANN
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 38,
7 - Aukude arv: 4
- Ava Ø (mm): 100
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 18
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LM
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 12
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 35.4
- Centering Diameter [mm]: 65
- Test Mark: ECE R90
-
Article number of recommended accessories: 131-
07- 004, 131- 07- 125, 131- 07- 126 - Replace in pairs only:
- Required quantity: 2
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LM
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
-
Supplementary Article/Info 2: with bolts/
screws - Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 4
- Surface: Coated
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 35.4
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124.5
- Bore Diameter [mm]: 13.6
-
Test Mark: E1 90R-
02C0165/ 1151 - Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Ehitusaasta alates: 05.1999
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Kerenumber (VIN) alates: 6KX290000
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 232
-
Kõrgus (mm): 39,
5 - Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
-
Rattapoldi ava läbimõõt [mm]: 13,
6 - Aukude arv: 4
- Piduriketta liik: täis
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- Installatsiooni pool: Tagasild
- Ehitusaasta alates: 06.1999
- Ehitusaasta kuni: 10.2002
- Kogus pakendis: 2
-
Kontrolltähistus: ECE-
R90 -
Kõrgus (mm): 39,
5 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 9
- Välisläbimõõt [mm]: 232
- Aukude arv: 4
- Ava Ø (mm): 65
- Pealispind: värvitud
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LG
- Ehitusaasta kuni: 05.1999
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
- Bore Diameter [mm]: 13.6
- Brake Disc Thickness [mm]: 20
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Inner Diameter [mm]: 123.8
- Height [mm]: 39
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 239
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Pidurikettajämedus [mm]: 9
- Veljeaukude hulk: 4
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 40,
3 - Välisläbimõõt [mm]: 230
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
-
Kaal (kg): 2,
5 - Nimetus: SW 30 92 2876
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Ehitusaasta alates: 05.1999
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Kerenumber (VIN) alates: 6K_X_290000
- Kogus pakendis: 2
- Piduriketta liik: täis
- Aukude arv: 4
-
Kontrolltähistus: E1 90R-
02C0100/ 1611 - Pealispind: õlitatud
- Välisläbimõõt [mm]: 232
- Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
4 - Nimetus: DE BG3505
- Tootja: DELPHI
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LA
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 239
-
Kõrgus (mm): 38,
6 - Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
-
Rattapoldi ava läbimõõt [mm]: 13,
6 - Aukude arv: 4
- Piduriketta liik: täis
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- PR-numbri jaoks: 1ZK
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Aukude arv: 4
- Pealispind: kaetud
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Pidurikettajämedus [mm]: 9
- Veljeaukude hulk: 4
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 40,
3 - Välisläbimõõt [mm]: 230
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
-
Kaal (kg): 2,
5 - Hooldusinfot jälgida:
- Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
- Käigukasti liik: Automaatkäigukast
- Kogus pakendis: 2
-
Kõrgus (mm): 35,
2 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
-
Aukude arv: 1,
4 - Välisläbimõõt [mm]: 239
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
- Pealispind: kaetud
- Tootja: SKF TARCZE HAM
- Ehitusaasta alates: 02.1998
-
PR-numbri jaoks: 1KD,
1KS - Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 230
-
Kõrgus (mm): 39,
5 - Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
-
Rattapoldi ava läbimõõt [mm]: 15,
6 - Aukude arv: 5
- Piduriketta liik: täis
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- Hulk: 2
-
Kerenumber (VIN) alates: 6K-
X- 290 000 - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Diameter [mm]: 232
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Number of Holes: 5
- Surface: Painted
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 232
- General Information: brake disc; rear
- Tootja: VIKA
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LY,
1ZK - Ehitusaasta kuni: 05.1999
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
- Bore Diameter [mm]: 13.8
- Brake Disc Thickness [mm]: 20
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Inner Diameter [mm]: 131.5
- Height [mm]: 38.8
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 230
- Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 39
- Aukude arv: 5
- Keermemõõt: 16
- Ava Ø (mm): 100
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E190R-
02 C0190/ 0628 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Ehitusaasta kuni: 04.1999
- PR-numbri jaoks: 1KK
- Kerenumber (VIN) kuni: 6KX289999
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Installatsiooni pool: Tagasild
- Kõrgus (mm): 71
-
Tsentri läbimõõt (mm): 39,
8 - Aukude arv: 4
- Ava Ø (mm): 100
- Miinimumjämedus (mm): 8
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
0753
- Ehitusaasta alates: 02.1998
-
PR-numbri jaoks: 1KD,
1KS - Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 230
-
Kõrgus (mm): 39,
5 - Pidurikettajämedus [mm]: 9
- Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
-
Rattapoldi ava läbimõõt [mm]: 15,
6 - Aukude arv: 5
- Piduriketta liik: täis
-
Pealispind: Tsink-
lamell- kattega - Piirangutega toode/piirangu info 2: koos kruvidega
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LM
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 4
- Surface: Coated
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 35.4
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124.5
- Bore Diameter [mm]: 13.6
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0859/ 1218 - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Ehitusaasta kuni: 05.1999
-
PR-numbri jaoks: 1LY,
1ZK - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 38.8
- Centering Diameter [mm]: 65
- Test Mark: ECE R90
-
Article number of recommended accessories: 131-
07- 145, 131- 07- 146 - Replace in pairs only:
- Required quantity: 2
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Ehitusaasta kuni: 05.1999
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 20
- Ava Ø (mm): 100
- Aukude arv: 4
- Kõrgus (mm): 38
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Välisläbimõõt [mm]: 256
- Tootja: KAMOKA UK£ADY HAMULCOWE
- PR-numbri jaoks: 1LG
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 239
- Kõrgus (mm): 39
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
-
Rattapoldi ava läbimõõt [mm]: 13,
6 - Aukude arv: 4
- Piduriketta liik: õhutusega
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 9
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 40
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 230
- Pealispind: kaetud
- Miinimumjämedus (mm): 7
- Väändejõud [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.7165.11
- Kvaliteediklass: Q
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LA
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 38.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124.5
- Bore Diameter [mm]: 13.6
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0165/ 1150 - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Ehitusaasta alates: 05.1999
- Kerenumber (VIN) alates: 6K_X_290000
- Kogus pakendis: 2
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 9
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 40
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 230
- Pealispind: kaetud
- Miinimumjämedus (mm): 7
- Väändejõud [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.7165.21
- Kvaliteediklass: Q
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Height [mm]: 39.5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Outer Diameter [mm]: 232
- Number of Holes: 1
- Centering Diameter [mm]: 65
- Tootja: DRIVE
-
PR-numbri jaoks: 1LY,
1ZE, 1ZK - Plokieraldus:
- Pidurikettajämedus [mm]: 20
- Veljeaukude hulk: 4
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 39
- Välisläbimõõt [mm]: 256
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 18
- Tsentri läbimõõt (mm): 65
-
Kaal (kg): 4,
515 - Hooldusinfot jälgida:
- Tootja: BLUEPRINT
- Kogus pakendis: 2
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Height [mm]: 38.5
- Rim Hole Number: 4
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 142
- Weight [kg]: 4.22
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
-
PR-numbri jaoks: 1LY,
1ZE, 1ZK - Plokieraldus:
- Pidurikettajämedus [mm]: 20
- Veljeaukude hulk: 4
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 38,
8 - Välisläbimõõt [mm]: 256
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 18
- Tsentri läbimõõt (mm): 65
-
Kaal (kg): 4,
515 - Hooldusinfot jälgida:
- Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Ehitusaasta alates: 02.1998
- Ehitusaasta kuni: 08.2002
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LM
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 10
-
Kõrgus (mm): 35,
2 - Ava Ø (mm): 100
- Piduriketta liik: täis
- Tsentri läbimõõt (mm): 65
- Aukude arv: 4
- Pealispind: õlitatud
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 13,
8 - Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
-
Kerenumber (VIN) kuni: 6K-
X- 289999 - Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Support plate diameter [mm]: 50.2
-
Thread Size: M12x1,
5 - Inner Diameter [mm]: 121.4
- Height [mm]: 71.2
- Centering Diameter [mm]: 39.8
- Outer Diameter [mm]: 226
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Piduri-/sõidudünaamika: sõidukitele ilma ABS
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Aukude arv: 4
- Pealispind: kaetud
- Lisainfo: Brake Disc
- Ehitusaasta alates: 02.1998
- Ehitusaasta kuni: 08.2002
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LA
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
-
Kõrgus (mm): 38,
7 - Ava Ø (mm): 100
- Piduriketta liik: täis
- Tsentri läbimõõt (mm): 65
- Aukude arv: 4
- Pealispind: õlitatud
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 13,
7 - Tootja: BOSCH
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- Ehitusaasta alates: 05.1999
- Kerenumber (VIN) alates: 6KX290000
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Kogus pakendis: 2
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 232
-
Pidurikettajämedus [mm]: 8,
9 - Miinimumjämedus (mm): 7
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
4 - Aukude arv: 4
-
Keermemõõt: 13,
8 - Ava Ø (mm): 100
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E1 90R-
02 C0190/ 0694 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 256
- General Information: brake disc; front
- Tootja: VIKA
- Installatsiooni pool: Esisild
- Ehitusaasta kuni: 06.1999
- Kogus pakendis: 2
-
Kontrolltähistus: ECE-
R90 - Kõrgus (mm): 39
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 20
- Välisläbimõõt [mm]: 256
- Aukude arv: 4
- Ava Ø (mm): 65
- Pealispind: värvitud
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS -
Piduriketta liik: täis,
piludega/ augustatud - Välisläbimõõt [mm]: 230
- Pidurikettajämedus [mm]: 9
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 39
- Aukude arv: 5
- Ava Ø (mm): 100
- Pealispind: värvitud
- Miinimumjämedus (mm): 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Pidurikettajämedus [mm]: 10
- Veljeaukude hulk: 4
-
Jämedus/Tugevus (mm): 71,
5 - Välisläbimõõt [mm]: 226
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 50
-
Kaal (kg): 4,
461 - Piirangutega toode/piirangu info 2: ilma rattalaagrita
- Hooldusinfot jälgida:
- Tootja: FEBI HAMULCE
- Kogus pakendis: 2
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Ehitusaasta alates: 05.1999
- Kogus pakendis: 2
- Piduriketta liik: täis
- Aukude arv: 4
-
Kontrolltähistus: E1 90R-
02C0527/ 1870 - Pealispind: õlitatud
- Välisläbimõõt [mm]: 226
-
Pidurikettajämedus [mm]: 10,
1 - Miinimumjämedus (mm): 8
-
Tsentri läbimõõt (mm): 50,
2 -
Kõrgus (mm): 71,
1 - Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG2389
- Ehitusaasta alates: 02.1998
- Ehitusaasta kuni: 08.2002
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LG
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
-
Kõrgus (mm): 38,
6 - Ava Ø (mm): 100
- Piduriketta liik: õhutusega
- Tsentri läbimõõt (mm): 65
- Aukude arv: 4
- Pealispind: õlitatud
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 13,
6 - Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 18
- Height [mm]: 38.8
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 4
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LA
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Number of Holes: 4
- Surface: Coated
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 38.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124.5
- Bore Diameter [mm]: 13.6
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0859/ 1217 - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Tagasild
- Kerenumber (VIN) kuni: 6KX289999
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
- Kõrgus (mm): 71
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Välisläbimõõt [mm]: 226
- Aukude arv: 4
-
Tsentri läbimõõt (mm): 50,
2 - Ava Ø (mm): 100
- Pealispind: kaetud
- Tootja: SKF TARCZE HAM
- Ehitusaasta kuni: 05.1999
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Ava Ø (mm): 100
- Aukude arv: 4
-
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Kõrgus (mm): 71
- Tsentri läbimõõt (mm): 39
- Pealispind: kaetud
- Välisläbimõõt [mm]: 226
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
- Piduriketta liik: täis
- Pealispind: kaetud
- Välisläbimõõt [mm]: 232
- Pidurikettajämedus [mm]: 9
- Kõrgus (mm): 39
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Kontrolltähistus: ECE R90 APPROVED
- Miinimumjämedus (mm): 7
-
Kaal (kg): 2,
64 -
Puurpilt/auguarv: 5/
4 - Tootja: ZIMMERMANN
-
PR-numbri jaoks: 1LY,
1ZE, 1ZK - Plokieraldus:
- Pidurikettajämedus [mm]: 20
- Veljeaukude hulk: 4
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 38,
8 - Välisläbimõõt [mm]: 256
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 18
- Tsentri läbimõõt (mm): 65
-
Kaal (kg): 4,
515 - Nimetus: SW 32 90 6512
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pidurikettajämedus [mm]: 10
- Veljeaukude hulk: 4
- Jämedus/Tugevus (mm): 72
- Välisläbimõõt [mm]: 226
- Ava Ø (mm): 100
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 50
-
Kaal (kg): 4,
461 - Piirangutega toode/piirangu info 2: ilma rattalaagrita
- Hooldusinfot jälgida:
- Tootja: BLUE PRINT
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 226
- Brake Disc Thickness [mm]: 10
- Height [mm]: 71.5
- Rim Hole Number: 4
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Hub Diameter [mm]: 135
- Weight [kg]: 4.42
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 226
-
Kõrgus (mm): 71,
5 - Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
-
Tsentri läbimõõt (mm): 39,
9 - Ava Ø (mm): 100
- Aukude arv: 4
- Piduriketta liik: täis
-
Keermemõõt: M12x1,
5 - vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Installatsiooni pool: Esisild
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
3 - Aukude arv: 4
- Ava Ø (mm): 100
- Miinimumjämedus (mm): 20
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Height [mm]: 39
- Brake Disc Thickness [mm]: 9
- Thread Size: 16
- Minimum thickness [mm]: 7
- Outer Diameter [mm]: 230
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Tootja: PROFIPOWER
- Fitting Position: Front Axle
- Brake Disc Type: solid
- Diameter [mm]: 238.8
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 239
- General Information: brake disc; front
- Tootja: VIKA
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- Outer Diameter [mm]: 226
- Brake Disc Thickness [mm]: 10
- Brake Disc Type: solid
- Minimum thickness [mm]: 8
- Height [mm]: 71
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 39.8
-
Supplementary Article/Info 2: with wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 4
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 226
- Height [mm]: 71
- Number of Holes: 4
- Centering Diameter [mm]: 39.8
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Weight [kg]: 9.5
- Minimum thickness [mm]: 8
- Tootja: TOMEX BRAKES
-
Kerenumber (VIN) alates: 6K-
X- 290000 - Ehitusaasta kuni: 05.1999
-
PR-numbri jaoks: 1KE,
1KK, 1KQ - Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 232
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 39.5
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 125
- Bore Diameter [mm]: 13.6
-
Test Mark: E1 90R-
02C0165/ 0925 - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
-
Piduriketta liik: täis,
piludega - Pidurikettajämedus [mm]: 9
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 40
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 230
- Pealispind: kaetud
- Miinimumjämedus (mm): 7
- Väändejõud [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.7165.75
Lühiinformatsioon: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LG
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 4
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 39
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 123.8
- Bore Diameter [mm]: 13.6
-
Test Mark: E1 90R-
02C0115/ 0110 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Ehitusaasta alates: 02.1998
- Ehitusaasta kuni: 08.2002
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LY,
1ZK, 1ZE - Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Miinimumjämedus (mm): 18
-
Kõrgus (mm): 38,
7 - Ava Ø (mm): 100
- Piduriketta liik: õhutusega
- Tsentri läbimõõt (mm): 65
- Aukude arv: 4
- Pealispind: kaetud
- Töötlus: legeeritud
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 13,
6 - Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Piduriketta liik: õhutusega
- Aukude arv: 4
-
Kontrolltähistus: E1 90R-
02C0289/ 1616 - Pealispind: õlitatud
- Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 20
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 39
- Tootja: DELPHI LOCKHEED HAMULCE
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Aukude arv: 4
- Kõrgus (mm): 71
- Tsentri läbimõõt (mm): 40
- Välisläbimõõt [mm]: 226
- Miinimumjämedus (mm): 8
- Tootja: BREMBO
- Nimetus: BR 08.5005.14
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LG
- Kogus pakendis: 2
- Piduriketta liik: sisemine õhutus
- Pealispind: kaetud
- Välisläbimõõt [mm]: 239
- Pidurikettajämedus [mm]: 20
- Kõrgus (mm): 39
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Kontrolltähistus: ECE R90 APPROVED
- Miinimumjämedus (mm): 18
-
Kaal (kg): 3,
84 -
Puurpilt/auguarv: 5/
4 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- Piduri-/sõidudünaamika: sõidukitele ilma ABS
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
-
Kõrgus (mm): 71,
2 - Miinimumjämedus (mm): 8
- Pealispind: kaetud
- Siseläbimõõt [mm]: 121
- Ava Ø (mm): 100
-
Tsentri läbimõõt (mm): 39,
8 -
Puurpilt/auguarv: 04/
04 - Rattapoldi ava läbimõõt [mm]: 12
-
Kaal (kg): 4,
4 - Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 8DD355101661
- Tootja: HELLA PAGID
Piirangutega toode/piirangu info 2: koos rattakeskmega, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Tagasild
- Ehitusaasta kuni: 04.1999
- PR-numbri jaoks: 1KK
- Kerenumber (VIN) kuni: 6KX289999
- Kogus pakendis: 2
- Pealispind: värvitud
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Kõrgus (mm): 71
-
Tsentri läbimõõt (mm): 39,
8 - Aukude arv: 4
-
Keermemõõt: M12 x 1,
50 - Ava Ø (mm): 100
- Värv: must
- Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Ehitusaasta kuni: 04.1999
- PR-numbri jaoks: 1KK
- Kerenumber (VIN) kuni: 6KX289999
- Fitting Position: Rear Axle
- Height [mm]: 71.2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Number of bores: 4
- Outer Diameter [mm]: 226
- Centering Diameter [mm]: 39.8
- Tootja: DRIVE
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 20
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 39
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 256
- Pealispind: kaetud
- Miinimumjämedus (mm): 18
- Väändejõud [Nm]: 110
- Tootja: BREMBO
- Nimetus: BR 09.5166.11
- Kvaliteediklass: Q
-
Kerenumber (VIN) kuni: 6K-
X- 289999 - Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 226
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Number of Holes: 4
- Surface: Coated
-
Supplementary Article/Info 2: without ABS sensor ring,
without wheel bearing - Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 71.2
- Centering Diameter [mm]: 39.8
- Support plate diameter [mm]: 50.2
- Inner Diameter [mm]: 121.4
-
Thread Size: M12x1,
5 - MAPP code available:
- Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Installatsiooni pool: Tagasild
- Piduri-/sõidudünaamika: sõidukitele ilma ABS
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
-
Kõrgus (mm): 71,
2 - Miinimumjämedus (mm): 8
- Pealispind: kaetud
- Siseläbimõõt [mm]: 121
- Ava Ø (mm): 100
-
Tsentri läbimõõt (mm): 39,
8 -
Puurpilt/auguarv: 04/
04 - Rattapoldi ava läbimõõt [mm]: 12
-
pakendi pikkus [cm]: 24,
8 -
pakendi laius [cm]: 24,
8 -
pakendi kõrgus [cm]: 10,
5 -
Kaal (kg): 4,
4 - Tootja: TEXTAR TARCZE HAMULCOWE
- Kogus pakendis: 2
Piirangutega toode/piirangu info 2: koos rattakeskmega, ilma rattalaagrita, ilma rattakinnituspoltideta
- Hulk: 2
-
Kerenumber (VIN) kuni: 6K-
X- 290 000 - Fitting Position: Rear Axle
- Brake Disc Type: solid
- Diameter [mm]: 226
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 39.88
- Outer Diameter [mm]: 226
- General Information: brake disc; rear
- Tootja: VIKA
- Ehitusaasta alates: 06.1999
- Ehitusaasta kuni: 10.2002
-
Pidurisüsteem: Girling-
Lucas - Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Kontrolltähistus: ECE-
R90 -
Kõrgus (mm): 39,
5 - Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 280
- Aukude arv: 4
- Ava Ø (mm): 65
- Pealispind: värvitud
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Kogus pakendis: 2
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
-
Kõrgus (mm): 38,
8 - Miinimumjämedus (mm): 18
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 132,
4 - Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
-
Puurpilt/auguarv: 04/
05 -
Rattapoldi ava läbimõõt [mm]: 13,
8 -
pakendi pikkus [cm]: 27,
8 -
pakendi laius [cm]: 27,
8 -
pakendi kõrgus [cm]: 10,
5 -
Kaal (kg): 4,
2 - Nimetus: PIDURIKETAS
- Tootja: TEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Ehitusaasta kuni: 05.1999
- PR-numbri jaoks: 1LG
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 39
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 123.8
- Bore Diameter [mm]: 13.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Ehitusaasta kuni: 05.1999
-
PR-numbri jaoks: 1LY,
1ZK - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 4
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 38.8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 131.5
- Bore Diameter [mm]: 13.8
-
Test Mark: E1 90R-
02C0115/ 0442 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZK
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
-
Kõrgus (mm): 38,
8 - Miinimumjämedus (mm): 18
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 132,
4 - Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
-
Puurpilt/auguarv: 04/
05 -
Rattapoldi ava läbimõõt [mm]: 13,
8 -
Kaal (kg): 4,
2 - Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 8DD355101321
- Tootja: HELLA PAGID
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
-
Kerenumber (VIN) kuni: 6K-
X- 289999 - Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 226
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 4
-
Supplementary Article/Info 2: with ABS sensor ring,
without wheel bearing - Height [mm]: 71.5
- Centering Diameter [mm]: 39.9
- Support plate diameter [mm]: 50.3
- Inner Diameter [mm]: 121.5
- Bolt Hole Circle Ø [mm]: 100
-
Thread Size: M12x1,
5 - MAPP code available:
- Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Piduri-/sõidudünaamika: sõidukitele ilma ABS
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Piduriketta liik: täis
- Pealispind: kaetud
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Kõrgus (mm): 72
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Ratta keskauguläbimõõt 1 (mm): 40
- Ratta keskauguläbimõõt 2 (mm): 50
-
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Miinimumjämedus (mm): 8
-
Kaal (kg): 4,
52 -
Puurpilt/auguarv: 4/
4 - Tootja: ZIMMERMANN
-
PR-numbri jaoks: 1LV,
1LW, 1LD -
Piduriketta liik: õhutusega,
piludega/ augustatud - Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Installatsiooni pool: Esisild
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
3 - Aukude arv: 4
- Ava Ø (mm): 100
- Pealispind: värvitud
- Miinimumjämedus (mm): 20
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Kogus pakendis: 2
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 20
- Tsentri läbimõõt (mm): 65
-
Kõrgus (mm): 39,
3 - Aukude arv: 4
-
Keermemõõt: 13,
8 - Ava Ø (mm): 100
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E1 90R-
02 C0185/ 0696 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Ehitusaasta alates: 02.1998
- Ehitusaasta kuni: 08.2002
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 20
-
Kõrgus (mm): 39,
2 - Ava Ø (mm): 100
-
Piduriketta liik: õhutusega,
sisemine õhutus - Tsentri läbimõõt (mm): 65
- Aukude arv: 4
- Pealispind: õlitatud
- Töötlus: hochgekohlt
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 13,
6 - Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Kogus pakendis: 2
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 22
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 39
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 280
- Miinimumjämedus (mm): 20
- Väändejõud [Nm]: 110
- Tootja: BREMBO
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KD,
1KS - Kogus pakendis: 2
-
Piduriketta liik: täis,
perforeeritud - Pidurikettajämedus [mm]: 9
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 40
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 230
- Pealispind: kaetud
-
Miinimumjämedus (mm): 7,
5 - Väändejõud [Nm]: 120
- Tehniline informatsioon: ECE R 90 Homologation.
- Nimetus: BR 08.7165.1X
- Tootja: BREMBO
- Kvaliteediklass: Q
Üldine informatsioon: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Piduriketta liik: sisemine õhutus,
piludega - Pidurikettajämedus [mm]: 20
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 39
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 256
- Pealispind: kaetud
- Miinimumjämedus (mm): 18
- Väändejõud [Nm]: 110
- Nimetus: BR 09.5166.75
- Tootja: BREMBO
Lühiinformatsioon: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LY,
1ZK - Kogus pakendis: 2
- Piduriketta liik: sisemine õhutus
- Pealispind: kaetud
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Kõrgus (mm): 39
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Kontrolltähistus: ECE R90 APPROVED
- Miinimumjämedus (mm): 18
-
Kaal (kg): 4,
5 -
Puurpilt/auguarv: 5/
4 - Tootja: ZIMMERMANN
- Ehitusaasta kuni: 05.1999
-
PR-numbri jaoks: 1LY,
1ZK - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 38.8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 131.5
- Bore Diameter [mm]: 13.8
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Ehitusaasta kuni: 05.1999
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 4
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 39.5
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 137
- Bore Diameter [mm]: 13.6
-
Test Mark: E1 90R-
02C0118/ 0160 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Installatsiooni pool: Tagasild
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Kogus pakendis: 2
- Piduriketta liik: täis
- Pealispind: kaetud
- Välisläbimõõt [mm]: 226
- Pidurikettajämedus [mm]: 10
- Kõrgus (mm): 72
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Ratta keskauguläbimõõt 1 (mm): 40
- Ratta keskauguläbimõõt 2 (mm): 50
-
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
koos ABS- andurirõngaga - Miinimumjämedus (mm): 8
-
Kaal (kg): 4,
56 -
Puurpilt/auguarv: 4/
4 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LV,
1LW, 1LD - Kogus pakendis: 2
-
Piduriketta liik: sisemine õhutus,
piludega - Pidurikettajämedus [mm]: 22
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 39
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 280
- Pealispind: kaetud
- Miinimumjämedus (mm): 20
- Väändejõud [Nm]: 110
- Tootja: BREMBO
- Nimetus: BR 09.6728.75
- Kvaliteediklass: Q
Lühiinformatsioon: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LD,
1LV, 1LW - Kogus pakendis: 2
- Height [mm]: 39.2
- Weight [kg]: 11.72
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Outer Diameter [mm]: 280
- Number of Holes: 4
- Centering Diameter [mm]: 65
- Tightening Torque [Nm]: 110
- Surface: Coated
- Packing Type: Box
- Quantity Unit: Set
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 9.5
- Tootja: JURID
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Piduriketta liik: augustatud/
sise - Pidurikettajämedus [mm]: 20
- Aukude arv: 4
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 39
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 256
- Pealispind: kaetud
-
Miinimumjämedus (mm): 18,
5 - Väändejõud [Nm]: 110
- Tehniline informatsioon: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 09.5166.1X
Üldine informatsioon: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LY,
1LK - Kogus pakendis: 2
-
Piduriketta liik: sisemine õhutus,
perforeeritud - Pealispind: kaetud
- Välisläbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 20
- Kõrgus (mm): 39
- Veljeaukude hulk: 4
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Kontrolltähistus: KBA 60872
- Miinimumjämedus (mm): 18
-
Kaal (kg): 4,
5 -
Puurpilt/auguarv: 5/
4 - Tootja: ZIMMERMANN
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog