• Installatsiooni pool: Esisild
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth: 48
• Lisainfo: 27-0296

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kerenumber (VIN) alates: 7M3513711
• Ehitusaasta alates: 11.2002
• PR-numbri jaoks: 9U0
• Sensor Type: Active sensor
• Length [mm]: 479
• Socket colour: black
• Tootja: JP GROUP A/S

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kerenumber (VIN) alates: 7M3513711
• Ehitusaasta alates: 11.2002
• PR-numbri jaoks: 9U1
• Sensor Type: Active sensor
• Length [mm]: 479
• Socket colour: black

• Installatsiooni pool: Esisild
• Inner Diameter [mm]: 79
• Width [mm]: 13.1
• Outer Diameter [mm]: 83
• Number of Teeth, ABS ring: 48
• Tootja: TRISCAN
• Lisainfo: FORD, SEAT, VOLKSWAGEN

• Installatsiooni pool: esisild paremal
• Seerianumber: HCA-FR-014
• Tootja: NTY

• Inner Diameter [mm]: 79
• Outer Diameter [mm]: 83
• Material: Steel
• Number of Teeth, ABS ring: 48
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 0.028
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 490
• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-FR-044
• Tootja: NTY

• Installatsiooni pool: Tagasild vasakul
• Seerianumber: HCA-FR-016
• Tootja: NTY

• Installatsiooni pool: Tagasild paremal
• Seerianumber: HCA-FR-013
• paaris tootenumbrid: HCA-FR-012
• Tootja: NTY

• Installatsiooni pool: esisild vasakul
• Seerianumber: HCA-FR-015
• Tootja: NTY

• Installatsiooni pool: esisild paremal
• Kaablipikkus (mm): 525
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 031
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Tootja: DENCKERMANN HAMULCE

• Installatsiooni pool: Tagasild vasakul
• Kaablipikkus (mm): 1 095
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild paremal
• Kerenumber (VIN) kuni: 7M3513710
• Ehitusaasta kuni: 10.2002
• Sensor Type: Passive sensor
• Length [mm]: 474
• Socket colour: black

• Installatsiooni pool: Tagasild paremal
• Kaablipikkus (mm): 1 026
• Pistikkontaktide arv: 6
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-VW-039
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Pistikkontaktide arv: 4
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Tootja: NTY

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kerenumber (VIN) alates: 7M3513711
• Ehitusaasta alates: 11.2002
• PR-numbri jaoks: 9U0
• Sensor Type: Active sensor
• Length [mm]: 1,031
• Socket colour: black

• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Installatsiooni pool: esisild mõlemapoolselt
• Üldine informatsioon: ABS speed sensor; front
• Tootja: VIKA

• Kerenumber (VIN) alates: 7M-3-513 711
• Installatsiooni pool: Tagasild mõlemapoolselt
• Kaablipikkus (mm): 1 110
• Ühenduste arv: 2, 4
• Tootja: JPN

• Cable Length [mm]: 1,110
• Fitting Position: Front Axle
• Tootja: KAMOKA

• Cable Length [mm]: 1,090
• Fitting Position: Rear Axle
• Tootja: KAMOKA

• Kerenumber (VIN) kuni: 7M3513710
• vajaminev tükihulk: 1
• Ehitusaasta kuni: 10.2002
• Installatsiooni pool: esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Mootorikood: AUY
• Kerenumber (VIN) alates: 7M-3-513 711
• Installatsiooni pool: Tagasild mõlemapoolselt
• Kaablipikkus (mm): 1 090
• Ühenduste arv: 2
• Tootja: JPN

• Installatsiooni pool: esisild mõlemapoolselt
• Kaablipikkus (mm): 490
• Ühenduste arv: 2
• Tootja: JPN

• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 1 270
• Pistikkontaktide arv: 4
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild, esisild paremal
• paaris tootenumbrid: GH-702514V
• Tootja: AUTO-GH

• Installatsiooni pool: Esisild, esisild vasakul
• paaris tootenumbrid: GH-702514H
• Tootja: AUTO-GH

• Pikkus (mm): 1 026
• Installatsiooni pool: Tagasild vasakul
• Üldine informatsioon: ABS speed sensor; rear left
• Tootja: VIKA

• Mootorikood: AUY
• vajaminev tükihulk: 1
• Kerenumber (VIN) kuni: 7M-3-513710
• Braking/Driving Dynamics: for vehicles with ABS
• Wear Warning Contact: not prepared for wear warning indicator
• Rated Voltage [V]: 12
• Fitting Position: Front Axle Right
• Length [mm]: 550
• Resistor [Ohm]: 1,120
• Cable Length [mm]: 468
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Supplementary Article/Info 2: with cable
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 474
• Installatsiooni pool: Esisild
• Üldine informatsioon: ABS speed sensor; front
• Tootja: VIKA

• Pikkus (mm): 1 026
• Installatsiooni pool: Tagasild paremal
• Üldine informatsioon: ABS speed sensor; rear right
• Tootja: VIKA

• Installatsiooni pool: esisild mõlemapoolselt
• Kaablipikkus (mm): 504
• Ühenduste arv: 2, 4
• Tootja: JPN

• Kerenumber (VIN) kuni: 7M3513710
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• vajaminev tükihulk: 1
• Ehitusaasta kuni: 10.2002
• Installatsiooni pool: esisild vasakul
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 7M3513711
• PR-numbri jaoks: 9U0
• Ehitusaasta alates: 11.2002
• pikkus üle kõige (mm): 540
• Pikkus (mm): 28
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 479
• paaris tootenumbrid: 30402
• Kaal (kg): 0,09
• Tootja: A.B.S.

• Installatsiooni pool: ees
• Üldine informatsioon: ABS speed sensor; front
• Tootja: VIKA

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 7M3513711
• PR-numbri jaoks: 9U1
• Ehitusaasta alates: 11.2002
• pikkus üle kõige (mm): 540
• Pikkus (mm): 28
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 479
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• paaris tootenumbrid: 30401
• Kaal (kg): 0,11
• Tootja: A.B.S.

• Ehitusaasta kuni: 10.2002
• Installatsiooni pool: vasakul
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• vajaminev tükihulk: 1
• Kerenumber (VIN) kuni: 7M_3_513710
• Cable Length [mm]: 450
• Sensor Type: Inductive Sensor
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU012806661

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: AUY
• Kerenumber (VIN) kuni: 7M-3-513710
• Length [mm]: 474
• Braking/Driving Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Fitting Position: Front Axle Left
• Resistor [Ohm]: 1,100
• Colour: black
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) alates: 7M3513711
• PR-numbri jaoks: 9U0
• Ehitusaasta alates: 11.2002
• pikkus üle kõige (mm): 1 145
• Pikkus (mm): 28
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 075
• paaris tootenumbrid: 30316
• Kaal (kg): 0,18
• Tootja: A.B.S.

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 11.2002
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Kerenumber (VIN) alates: 7M-3-513 711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 570
• Tootja: DELPHI
• Nimetus: DE SS20494

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 490
• Weight [kg]: 0.052
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 7M3513711
• vajaminev tükihulk: 2
• Ehitusaasta alates: 11.2002
• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Installatsiooni pool: esisild paremal
• Ehitusaasta kuni: 10.2002
• Kerenumber (VIN) kuni: 7M_3_513710
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 515
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20173

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 11.2002
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kerenumber (VIN) alates: 7M-3-513711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 505
• Tootja: DELPHI
• Nimetus: DE SS20387
• Kvaliteediklass: PJ

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 490
• Weight [kg]: 0.052
• Nimetus: SW 33 10 1316
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 7M-3-513711
• Cable Length [mm]: 530
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Tootja: FAE

• Mootorikood: AUY
• Kerenumber (VIN) alates: ******7M*3*513711
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,090
• Weight [kg]: 0.1
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 7M3513711
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• vajaminev tükihulk: 2
• Ehitusaasta alates: 11.2002
• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 11.2002
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Kerenumber (VIN) alates: 7M-3-513 711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,140
• Tootja: DELPHI
• Nimetus: DE SS20495

• Installatsiooni pool: esisild vasakul
• Ehitusaasta kuni: 11.2002
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kerenumber (VIN) kuni: 7M-3-513 710
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Cable Length [mm]: 530
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20171
• Kvaliteediklass: PJ

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 10.2002
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• Kerenumber (VIN) kuni: 7M_3_513710
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Cable Length [mm]: 1,310
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20175

• Installatsiooni pool: Tagasild
• Üldine informatsioon: ABS speed sensor; rear
• Tootja: VIKA

• Kerenumber (VIN) kuni: 7M3513710
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• vajaminev tükihulk: 2
• Ehitusaasta kuni: 10.2002
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• PR-numbri jaoks: 9U1
• Kerenumber (VIN) alates: 7M3513711
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• vajaminev tükihulk: 2
• Ehitusaasta alates: 11.2002
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Number of connectors: 2, 4
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 504
• Weight [kg]: 0.075
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild paremal
• Kerenumber (VIN) kuni: 7M3513710
• Ehitusaasta kuni: 10.2002
• pikkus üle kõige (mm): 545
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 474
• paaris tootenumbrid: 30154
• Kaal (kg): 0,06
• Tootja: A.B.S.

• Mootorikood: AUY
• Kerenumber (VIN) alates: ******7M*3*513711
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,090
• Weight [kg]: 0.1
• Nimetus: SW 30 10 7733
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: ******7M*3*513711
• Number of connectors: 2, 4
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,110
• Weight [kg]: 0.129
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 7M-3-513711
• vajaminev tükihulk: 2
• Fitting Position: Front Axle Right, Front Axle Left, Front Axle
• Length [mm]: 479
• Braking/Driving Dynamics: for vehicles with ABS
• Wear Warning Contact: prepared for wear warning indicator
• Rated Voltage [V]: 12
• Colour: black
• Sensor Type: Hall Sensor, Passive sensor
• Number of connectors: 2
• Number of pins: 4
• Number of circuits: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kerenumber (VIN) alates: ******7M*3*513711
• Number of connectors: 2, 4
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,110
• Weight [kg]: 0.129
• Nimetus: SW 33 10 2290
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2, 4
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 504
• Weight [kg]: 0.075
• Nimetus: SW 30 10 6909
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul
• Kerenumber (VIN) kuni: 7M3513710
• Ehitusaasta kuni: 10.2002
• pikkus üle kõige (mm): 550
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 490
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• paaris tootenumbrid: 30155
• Kaal (kg): 0,08
• Tootja: A.B.S.
• Lisainfo: FE30154

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) kuni: 7M3513710
• Ehitusaasta kuni: 10.2002
• pikkus üle kõige (mm): 1 175
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 105
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• paaris tootenumbrid: 30228
• Kaal (kg): 0,21
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Kerenumber (VIN) alates: 7M3513711
• PR-numbri jaoks: 9U1
• Ehitusaasta alates: 11.2002
• pikkus üle kõige (mm): 1 080
• Pikkus (mm): 28
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 031
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• paaris tootenumbrid: 30229
• Kaal (kg): 0,13
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 05.2005
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kerenumber (VIN) alates: 7M-3-513 711
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,113
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20122

• Kerenumber (VIN) kuni: 7M-3-513710
• Installatsiooni pool: esisild vasakul
• Pikkus (mm): 474
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) kuni: 7M-3-513710
• Installatsiooni pool: esisild paremal
• Pikkus (mm): 474
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Pikkus (mm): 1 031
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) kuni: 7M-3-513710
• Installatsiooni pool: Tagasild vasakul
• Pikkus (mm): 1 026
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) kuni: 7M-3-513710
• Installatsiooni pool: Tagasild paremal
• Pikkus (mm): 1 026
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) alates: 7M-3-513711
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Pikkus (mm): 479
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) alates: 7M-3-513711
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Pikkus (mm): 479
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• MAPP-code olemas:
• Tootja: ATE

• Kerenumber (VIN) alates: 7M-3-515800
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Piduri-/sõidudünaamika: Sõidukile koos ESP
• Installatsiooni pool: Pidurivõimendi
• Pidurisüsteem: ATE
• Tootja: ATE