• Fitting Position: Rear Axle
• Height [mm]: 180
• Lisainfo: Protection sleeve for shock absorber, rear

• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Front Axle
• Height [mm]: 206
• Tootja: MAX
• Lisainfo: 72-2185

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Fitting Position: Rear Axle
• Shape: round
• Material: Thermoplast
• Height [mm]: 177
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Tootmise kuupäev alates: 09/04
• tootmise kuupäev kuni: 05/09
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Tootja: SASIC

• Hulk: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,07
• Materjal: Termoplast
• vajaminev tükihulk: 2
• Välisläbimõõt [mm]: 68, 80
• Üldine informatsioon: protective pipe; front
• Tootja: VIKA

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 68
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Nimetus: IM 37485
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Inner Diameter 1 [mm]: 63
• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 0.07
• Height [mm]: 198
• Inner Diameter 2 [mm]: 72
• Tootja: TEDGUM

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Nimetus: SW 30 93 6006
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• PR-numbri jaoks: 1JA
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.144
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.7
• Tootja: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Tootja: FEBEST

• Installatsiooni pool: Esisild
• Materjal: Termoplast
• Tootja: FAST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Šassii: ilma sportvedrustuseta sõidukitele
• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Nimetus: GH 339953
• Tootja: AUTO-GH

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-Ehitusliik: Teleskoop-amort
• Nimetus: CFD 564779
• Tootja: DACO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Teleskoop-amort
• Tootja: JAPKO

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"

• Šassii: tavavedrustusega sõidukile
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2504
• Nimetus: AMORT
• Tootja: MAX

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Kolvivarda läbimõõt [mm]: 25
• Nimetus: CFD 454722
• Tootja: DACO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY
• Lisainfo: 2000377 KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 50
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: ELS11-0356

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Tootja: ASHIKA
• Lisainfo: MA-00492

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Kolvivarda läbimõõt [mm]: 22
• Nimetus: CFD 454720
• Tootja: DACO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Šassii: ilma sportvedrustuseta sõidukitele
• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694702
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Vedruamort-välisläbimõõt [mm]: 50
• Tootja: AUTO-GH
• Nimetus: GH 359962

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-692207
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Vedruamort-välisläbimõõt [mm]: 55
• Nimetus: GH 359961
• Tootja: AUTO-GH

• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Clamp, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-1200
• Nimetus: AMORT
• Tootja: MAX

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Tootja: DRIVE

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Fitting Position: Rear Axle
• Weight [kg]: 2.59
• Shock Absorber Design: Spring-bearing Damper
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Korpuse läbimõõt klemmide piirkonnas [mm]: 55
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Amort-süsteem: kaks toru
• Vedruamort-välisläbimõõt [mm]: 50
• Kolvivarda läbimõõt [mm]: 22
• Tootja: JAPKO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Korpuseläbimõõt (mm): 55
• Tootja: OYODO

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI
• Nimetus: MM 4320G

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 55
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length [mm]: 338
• Tootja: DRIVE

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• soovitava lisavarustuse artiklinumber: 100 513 0008
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY
• Lisainfo: 1267250024

• PR-numbri jaoks: 1JA, UC2
• Šassii: ilma sportvedrustuseta sõidukitele
• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 585
• Length 2 [mm]: 348
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Vedruamort-välisläbimõõt [mm]: 55
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Šassii: für Fahrzeuge ohne Schlechtwegeausführung, ilma sportvedrustuseta sõidukitele Lisainfo: "Tootja: SRL
VW/SEAT/AUDI
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMA0148
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

• PR-numbri jaoks: 1JC, UC3
• Šassii: sportvedrustusega sõidukile
• Kogus pakendis: 2
• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 585
• Length 2 [mm]: 369
• Standpipe Diameter [mm]: 12
• Observe technical data:
• Tootja: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 22
• Diameter 2 [mm]: 5
• Spring Type: for vehicles with coil spring suspension
• Nimetus: AMORT
• Tootja: MAG

• Šassii: tavavedrustusega sõidukile
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Läbimõõt,kinnituspunktid (mm): 50
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
VW/SEAT/AUDI
(kvaliteediklass: PJ)"

• PR-numbri jaoks: G42, G55
• Šassii: sportvedrustusega sõidukile
• Kogus pakendis: 2
• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Length 1 [mm]: 560
• Length 2 [mm]: 367
• Diameter [mm]: 54
• Standpipe Diameter [mm]: 24
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Nimetus: AMORT
• Tootja: JPA

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length [mm]: 338
• Nimetus: AMORT
• Tootja: KYB
• Lisainfo: 344459

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung General Information: Please refer to the technical drawing in "Documents"

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Läbimõõt 1/Läbimõõt 2 (mm): 25/55
• soovitava lisavarustuse artiklinumber: SMJ0148
• Amort-kinnitusliik: ülemine tihvt
• Tootja: JAPKO
• Lisainfo: MJ00031 JAPKO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Šassii: sportvedrustusega sõidukile
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Vedruamort-välisläbimõõt [mm]: 55
• Amort-süsteem: kaks toru
• Kvaliteediklass: PJ
• Nimetus: Gas shock absorber

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 25
• Diameter 2 [mm]: 55
• Spring Type: for vehicles with coil spring suspension
• Nimetus: MM 4319G
• Tootja: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 412 2039/S, 100 412 2039, 100 640 0007
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SM0148
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0007, 100 412 2039/S, 100 412 2039
• Replace in pairs only:
• Nimetus: AMORT
• Tootja: MEY

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Esisild
• PR-numbri jaoks: G40, G53
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.1
• Length 1 [mm]: 392
• Length 2 [mm]: 553
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 15.5
• Packaging height [cm]: 16.2
• Housing diameter in clamping area [mm]: 55
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Nimetus: AMORT
• Tootja: KYB

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung Technical Information: Please refer to the technical drawing in "Documents"

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Parameter: SEOV30/13X212A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Nimetus: AMORT
• Tootja: KYB
• Lisainfo: KYB335808

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung Technical Information: Please refer to the technical drawing in "Documents"

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• tugevdatud variant:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Parameter: SEOV30/13X219A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without level control
• Shock Absorber System: Twin-Tube
• Tootja: BILSTEIN
• Nimetus: BI 19-127439
• Kvaliteediklass: Q

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile Lisainfo: "Tootja: BILSTEIN
AUDI A3 (8P1)
(kvaliteediklass: Q)"