• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Ülekandeliinide arv: 4
• juhtmeisolatsiooni materjal: Silikoon
• Materjal: CuSn (vask-tina)
• Kaablipikkus (mm): 250
• Kaabli ristlõige alates [mm²]: 0,5
• Kaabli ristlõige kuni [mm²]: 0,5
• Tootja: 3RG

• Mootorikood: CPTA
• Värvimarkeering: hall
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: CPTA
• Värvimarkeering: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Pistikkontaktide arv: 2
• Pistikute teostus: Lamepistik
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Tootja: MAGNETI MARELLI

• Pistikkontaktide arv: 4
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistiku värv: must
• Seerianumber: ESS-VW-000
• Tootja: NTY

• Hulk: 1
• Kaal (kg): 0,48
• Ühenduste arv: 2
• Värv: must
• Üldine informatsioon: knock sensor
• Tootja: VIKA

• Mootorikood: CPTA
• Korpusevärv: must
• Nimetus: EP 1.830.355
• Tootja: EPS

• Mootorikood: CPTA
• Korpusevärv: must
• Tootja: FACET

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 030 905 377 C, YM21 12A699 BA
• Tootja: MEAT&DORIA

Tootja: MAGNETI MARELLI

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 24
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Seerianumber: ECP-AU-029
• Tootja: NTY

• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• Pistikkontaktide arv: 4
• Tootja: JPN

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Number of pins: 3
• Fitting Depth [mm]: 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Colour: black
• Number of pins: 2
• Nimetus: DETONATSIOONIANDUR
• Tootja: MAX

• Number of pins: 2
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Üldine informatsioon: camshaft position sensor
• Tootja: BORSEHUNG

• Outer Diameter [mm]: 16
• Number of connectors: 3
• Weight [kg]: 0.014
• Nimetus: SW 33 10 9888
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 03G906051M
• Number of pins: 4
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: MAX
• Lisainfo: 21-0216

• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11473

• Pistikkontaktide arv: 4
• Tootja: JPN

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Tootja: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Mootorikood: CPTA
• Korpusevärv: must
• Nimetus: EP 1.957.144
• Tootja: EPS

• Mootorikood: CPTA
• Korpusevärv: must
• Tootja: FACET

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• vajaminev tükihulk: 1
• Nimetus: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Tootja: BRM

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Tootja: VERNET

• Üldine informatsioon: hall sender camshaft
• Tootja: VIKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Tootja: FAE ELEKTRYKA

• OE-numbri jaoks: 04E 906 051
• Tootja: BOSCH
• Nimetus: BS 0261230388

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10169

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PG013114301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CPTA
• Nimetus: EP 1.953.793
• Tootja: EPS

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.48
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Tootja: MAGNETI MARELLI

• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• vajaminev tükihulk: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Tootja: BREMI

• Tootja piirang: VAG
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 500
• Kaabli ristlõige [mm²]: 0,75
• Asetuslaius (mm): 1,5
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: +125
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• juhtmeisolatsiooni materjal: Silikoon
• Pistiku kesta tüüp: Pistikuhülsi korpus
• SVHC: SVHS aineid ei esine
• Nimetus: Kaabli remondikomplekt, tagatuli
• Tootja: HBE

• Mootorikood: CPTA
• Surve alates [kPA]: 11
• Surve kuni [kPA]: 307
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,75
• Nimetus: ANDUR, HEITGAASISURVE
• Tootja: EPS

• Mootorikood: CPTA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Tootja: FACET

• Üldine informatsioon: pressure sensor
• Tootja: BORSEHUNG

• OE-numbri jaoks: 03G 906 051 M
• Nimetus: ANDUR,KOMPRESSORIROHK
• Tootja: BOS

• Mootorikood: CPTA
• Installatsiooni pool: Pidurivõimendi
• Supplementary Article/Info 2: with integrated air temperature sensor
• Weight [kg]: 0.044
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Nimetus: DE PS20073-12B1
• Tootja: DELPHI

• Pistikkontaktide arv: 4
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 300
• Tootja: VDO

• Seerianumber: EFP-AU-006
• Tootja: NTY
• Nimetus: NTY EFP-AU-006

• Mootorikood: CPTA
• Pistikkontaktide arv: 2
• Värv: must
• Nimetus: Detonatsiooniandur
• Tootja: VDO

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Nimetus: CZUJNIK CI—N. POWIETRZA AUDI A1 1.4TFSI 14-
• Tootja: MAX

• Hulk: 1
• mudeli koodi jaoks: 4 Pin
• Number of pins: 4
• Pressure from [kPA]: 13
• Tootja: DELPHI
• Nimetus: DE PS10161

Tootja: BOSCH

• Pressure to [bar]: 280
• Number of pins: 3
• Tootja: FAE ELEKTRYKA

• Pistikkontaktide arv: 4
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 115
• Tootja: VDO

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PP358152251
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: FAE

Tootja: NRF

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG009108561
• Tootja: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Üldine informatsioon: pressure sensor
• Tootja: BORSEHUNG

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Cable Length [mm]: 475
• Oxygen Sensor: Broadband oxygen sensor, Heated
• Tootja: DELPHI ELEKTRONIKA

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Tootja: VERNET

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR, SOIDUPEDAALIASEND
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR, SOIDUPEDAALIASEND
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CPTA
• Lambda andur: Diagnoosisond
• Installatsiooni pool: pärast katalüsaatorit
• Oxygen Sensor: Heated
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 640
• for OE number: 04E 906 262 A
• for article number: 81847E
• Quality: OE EQUIVALENT
• Nimetus: Lambda andur
• Tootja: MD

• Mootorikood: CPTA
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Socket colour: black
• for OE number: 04E 906 262 K
• Weight [kg]: 0.117
• Length [mm]: 720
• Number of pins: 4
• Oxygen Sensor: Finger probe, Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring