Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kogus pakendis: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Nimetus: RONGASTIHEND
- Tootja: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Netosügavus [mm]: 22
- Netopikkus [mm]: 650
- Netolaius [mm]: 328
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: IBIZA V (kvaliteediklass PJ)
- Kogus pakendis: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Värv: sinine
-
Surve (bar): 1,
4 - Materjal: Plastik
-
Kaal (kg): 0,
112 - Tootja: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Nimetus: Radiator
- Kvaliteediklass: P
Lisainfo: IBIZA V (kvaliteediklass P)
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Tootja: KAMOKA
- PR-numbri jaoks: TJ4
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: MAX
- PR-numbri jaoks: TJ4
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Supplementary Article/Info 2: with mounting parts
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 650*328*26
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
- Netopikkus [mm]: 655
- Netolaius [mm]: 340
- Netosügavus [mm]: 32
- Tootja: JPN
- PR-numbri jaoks: TJ4
- Material: Aluminium
- Core Length [mm]: 649
- Core Width [mm]: 342
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 650*340*23
- Käigukasti liik: Käigukast
- Radiator type: Mechanically jointed cooling fins
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 328
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Tootja: TYC OWIETLENIE
- Mootorikood: CHZB
- Core Width [mm]: 342
- Core Length [mm]: 649
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Nimetus: MM BM1823
- Tootja: MAGNETI MARELLI
- PR-numbri jaoks: TJ4
- Core Width [mm]: 650
- Core Length [mm]: 340
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.01
- Tootja: VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 648
- Core Width [mm]: 326
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
648x326 mm, PL/ ALU
- Käigukasti liik: Käigukast 5 käiku
- Core Width [mm]: 415
- Core Length [mm]: 430
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3
- Tootja: VALEO
- Nimetus: VA 733062
Sõidukivarustus: sõidukitele ilma kliimaseadmeta, sõidukitele ilma haakeseadmeta
- Netosügavus [mm]: 26
- Netopikkus [mm]: 648
- Netolaius [mm]: 328
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: A1 (kvaliteediklass PJ)
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 322
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
- Nimetus: NI 640012
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 649
- Core Width [mm]: 340
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Cooling fins material: Aluminium
- Manufacturer: MAHLE
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
529 - Packaging height [cm]: 48.5
- Packaging length [cm]: 83.5
-
Nimetus: Radiaator,
mootorijahutus - Tootja: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Mootorikood: CHZB
- Sõidukivarustus: sõidukitele ilma kliimaseadmeta
- Käigukasti liik: Käigukast 5 käiku
- Core Length [mm]: 430
- Core Depth [mm]: 23
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Tootja: MAGNETI MARELLI
- Nimetus: MM BM851
- Radiator type: Brazed cooling fins
- Core Length [mm]: 648
- Core Width [mm]: 438
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
-
Vehicle Equipment: for vehicles with/
without air conditioning - Packaging width [cm]: 14
-
Net Weight [g]: 3,
781 - Packaging height [cm]: 58.5
- Packaging length [cm]: 90
-
Nimetus: Radiaator,
mootorijahutus - Tootja: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Küte/Jahutus: Lisaradiaator
- Cooling fins material: Aluminium
- Core Depth [mm]: 62
- Core Length [mm]: 640
- Core Width [mm]: 96
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Version: Charge Air Cooler
- Tootja: TYC OWIETLENIE
- Netopikkus [mm]: 640
- Netolaius [mm]: 96
- Netosügavus [mm]: 62
- Jahutusribi materjal: Alumiinium
- Materjal veekamber (radiaator): Plastik
- Radiaatori tüüp: Jahutusribid joodetud
- Sisend-Ø (mm): 20
- Väljalase-Ø (mm): 20
-
Kaal (kg): 2,
2 - pakendi pikkus [cm]: 87
- pakendi laius [cm]: 22
- pakendi kõrgus [cm]: 15
- OE-numbri jaoks: 6C0121253B
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog