• PR-numbri jaoks: 0BD, 0BE, 0N4, 1X1
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Tootja: FEBEST

• PR-numbri jaoks: 0N4, 1X1
• Weight [kg]: 0.23
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Tootja: FEBEST
• Lisainfo: 2398-007-KIT FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Nimetus: Rattakalde korrektuurkruvi
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mudeliaasta kuni: 2017
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.2
• Packaging length [cm]: 20
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Tootja: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Axle: Independent wheel suspension
• Supplementary Article/Info 2: with nut, with protect screen
• Nimetus: Rattakalde korrektuurkruvi
• Tootja: MAX

• mitte PR-numbrile: 2UF, 2UB
• Fitting Position: Front Axle
• Required quantity: 2
• Height [mm]: 70
• Nimetus: TG TED58322
• Tootja: TEDGUM

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Nimetus: Rattakalde korrektuurkruvi
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Axle: Independent wheel suspension
• Nimetus: Rattakalde korrektuurkruvi
• Tootja: MAX

• Fitting Position: Rear Axle
• Material: Thermoplast
• Weight [g]: 129
• Component Number: 2
• Nimetus: IM 51269
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Required quantity: 2
• Supplementary Article/Info 2: with protective cap/bellow
• Tootja: TEDGUM

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Tootja: NTY

• Mudeliaasta kuni: 2017
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.195
• reinforced version:
• Packaging length [cm]: 19.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Tootja: FEBEST

• for OE number: 1K0412303L
• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [g]: 170
• Component Number: 2
• Nimetus: IM 50491
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting

• PR-numbri jaoks: 0N4, 1X1
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Tootja: FEBEST

• Šassii: Elektr.vedrustusregul. sõidukitele
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Nimetus: Vedruamordi tugilaager
• Tootja: MAX

• for OE number: 5Q0511357Q
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 227
• Component Number: 2
• Nimetus: IM 50341
• Tootja: ORIGINAL IMPERIUM

• Hulk: 1, 2
• Ehitusaasta alates: 05.2015
• Ehitusaasta kuni: 05.2015
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Tootja: VIKA

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Material: Rubber/Metal
• Required quantity: 2
• Nimetus: TG TED22900
• Tootja: TEDGUM

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Rolling Bearing
• Nimetus: Laager - K„„ndmik VW P. AUDI, SKODA
• Tootja: MEY
• Lisainfo: 1006410020

• Fitting Position: Front Axle
• for OE number: 1K0412303B
• Tootja: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without ball bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Nimetus: Vedruamordi tugilaager
• Tootja: MEY

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Nimetus: SW 30 94 0171
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Tootja: LMI

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer! Nimetus: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Nimetus: Vedruamordi tugilaager
• Tootja: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Nimetus: COC 49495777
• Tootja: CORTECO

• Fitting Position: Front Axle
• for OE number: 1K0412303AA
• Tootja: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Šassii: Elektr.vedrustusregul. sõidukitele
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Required quantity: 2
• replacement in pairs recommended:
• Nimetus: Vedruamordi tugilaager
• Tootja: MEY

• Telg: Jäik sild
• Length [mm]: 133
• Material: PU (Polyurethane), Thermoplast
• Fitting Position: Rear Axle
• Weight [kg]: 0.392
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: FEB
• Lisainfo: FE175365

Šassii: ilma sportvedrustuseta sõidukitele, sõidukitele ilma elektr.vedrustusreguleerijata General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hulk: 2
• Ehitusaasta alates: 05.2015
• Ehitusaasta kuni: 05.2015
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Tootja: VIKA

• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
• Nimetus: COC 49495773
• Tootja: CORTECO

Telg: Üksikrattakinnitus, mitte üksikrattavedrustuse jaoks

• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Tootja: FEBEST

• Hulk: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Tootja: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Nimetus: Laager,amorditugilaager
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Tootja: LMI

SVHC: No information available, please contact the manufacturer! Nimetus: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Weight [g]: 431
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Nimetus: IM 37975
• Tootja: ORIGINAL IMPERIUM

• Hulk: 1, 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Tootja: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 812
• Supplementary Article/Info 2: without bearing
• Component Number: 2
• Nimetus: IM 37649
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Tootja: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer! Nimetus: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Nimetus: Vedruamordi tugilaager
• Tootja: SAA

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Hulk: 1, 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Tootja: VIKA

• Installatsiooni pool: paremal, vasakul, Tagasild
• Tootja: SNR
• Nimetus: SN KB954.08

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Tootja: SASIC

• Ehitusaasta kuni: 05.2015
• Šassii: tavavedrustusega sõidukile
• Fitting Position: Front Axle
• Height of bump stop [mm]: 80
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Material: Aluminium
• Tootja: METZGER

• Hulk: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Tootja: VIKA

• Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
• PR-numbri jaoks: G09
• Fitting Position: Front Axle
• Weight [kg]: 0.376
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Telg: Jäik sild
• Plokieraldus:
• PR-numbri jaoks: UC8
• Fitting Position: Rear Axle
• Weight [kg]: 0.256
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: FEB

Šassii: tõstetud vedrustusega sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 5E-D-000 001
• Kerenumber (VIN) kuni: 5E-8J006446
• Telg: Jäik sild
• Šassii: ilma madaldatud šassiita sõidukitele
• PR-numbri jaoks: 7ZV
• Fitting Position: Rear Axle
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: BIL

• Fitting Position: Rear Axle
• Nimetus:
• Tootja: KYB
• Lisainfo: SM9925

Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)

• Hulk: 2
• Ehitusaasta alates: 05.2015
• Ehitusaasta kuni: 05.2015
• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• General Information: suspension strut storage; front
• Tootja: VIKA

• Fitting Position: Front Axle
• Tootja: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Nimetus: Vedruamordi tugilaager
• Tootja: BIL

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Tootja: BORSEHUNG

• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: paremal, vasakul, Esisild
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Nimetus: SN KB657.27
• Tootja: NTN-SNR

• PR-numbri jaoks: G05
• kombineeritud PR-numbrile: G02+2UC
• Length [mm]: 172
• Width [mm]: 74
• Fitting Position: Front Axle
• Weight [kg]: 0.216
• Nimetus: Puhver, vedrustus
• Tootja: FEB

Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Tootja: LMI

SVHC: No information available, please contact the manufacturer! Nimetus: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Tootja: MEY

Nimetus: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Telg: Mitmehoovaline telg (Multi-link)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.402
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: FEB

Šassii: ilma sportvedrustuseta sõidukitele, sõidukitele ilma elektr.vedrustusreguleerijata General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 05.2015
• kombineeritud PR-numbrile: G02+2UB, G02+2UF
• Plokieraldus:
• Ehitusaasta alates: 05.2015
• PR-numbri jaoks: G06, G08
• Fitting Position: Front Axle
• Weight [kg]: 0.335
• Nimetus: Tolmukaitse komplekt,Amordid
• Tootja: FEB

Šassii: tugevdatud šassiiga sõidukile, tõstetud vedrustusega sõidukite jaoks General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Nimetus: Remondikomplekt,vedruamordi tugilaager
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Nimetus: BI 12-243945
• Tootja: BILSTEIN

• Fitting Position: Rear Axle
• Quantity: 2
• Quantity Unit: Kit
• General Information: repair kit for shock absorber; rear
• Tootja: BORSEHUNG

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Tootja: BORSEHUNG

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Tootja: BORSEHUNG

• Telg: Multi-link sild
• Fitting Position: Rear Axle
• Height of bump stop [mm]: 127
• Tootja: KYB
• Lisainfo: 910332 KYB

Šassii: tavavedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, ilma sportvedrustuseta sõidukitele, sõidukitele ilma elektr.vedrustusreguleerijata

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Tootja: BILSTEIN

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with rolling bearing
• Number of Parts [parts]: 2
• Tootja: METZGER

Tootja: AUTO-GH