Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber
- Hulk: 2
- Ehitusaasta kuni: 11.2012
- Fitting Position: Rear Axle
- General Information: protective pipe; rear
- Tootja: VIKA
- Kogus pakendis: 2
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Tootja: BORSEHUNG
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Tootja: BORSEHUNG
- Fitting Position: Rear Axle
- Axle: Independent wheel suspension
- Material: Thermoplast
- Height [mm]: 230
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Telg: Jäik sild
- Length [mm]: 269
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.056
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Telg: Mitmehoovaline telg
(Multi- link) - Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.07
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 230
- Material: Thermoplast
- Weight [g]: 72
- Diameter 1 [mm]: 59
- Diameter 2 [mm]: 66
- Nimetus: IM 37969
- Tootja: ORIGINAL IMPERIUM
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Tootja: BORSEHUNG
-
Telg: Mitmehoovaline telg
(Multi- link) - Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Nimetus: SW 30 94 5893
- Tootja: SWAG
- Lisainfo: 30 94 5893 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thickness [mm]: 172
- Material: Thermoplastic polyester elastomer
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.07
- Tootja: FEBI BILSTEIN
- Lisainfo: 46720 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Nimetus: CFD PK4210
- Tootja: DACO
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Piston Rod Diameter [mm]: 13
- Tootja: DENCKERMANN AMORTYZATORY
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Nimetus: CFD 560210
- Tootja: DACO
Šassii: tavavedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
-
PR-numbri jaoks: 0N1,
G03, G04 - Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Piston Rod Diameter [mm]: 11
- Axle: Rigid Axle
-
Shock Absorber System: Twin-
Tube -
for PR number: 1JA,
1JC, 0K0 - Kvaliteediklass: PJ
- Nimetus: Gas shock absorber
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, sportvedrustusega sõidukile, tavavedrustusega sõidukile
- Installatsiooni pool: Tagasild
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube -
Axle: Four-
Link Axle - Tootja: DENCKERMANN AMORTYZATORY
- Lisainfo: DSF211G DKM
Šassii: kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - max. length [mm]: 625
- Nimetus: CFD 560208
- Tootja: DACO
Šassii: tavavedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Socket Width 1 [mm]: 56
- Tootja: JAPKO
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Socket Width 1 [mm]: 56
-
Tootja: ASHIKA-
AMORTYZATORY -
Lisainfo: MA-
00827
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
-
PR-numbri jaoks: 0N1,
G03, G04 - Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Axle: Rigid Axle
-
Shock Absorber System: Twin-
Tube - Kvaliteediklass: PJ
- Nimetus: Gas shock absorber
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N4,
G03, G04 - Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Vehicle Equipment: for vehicles without level control
-
Shock Absorber System: Twin-
Tube - Kvaliteediklass: PJ
- Nimetus: Gas shock absorber
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung, sportvedrustusega sõidukile, tavavedrustusega sõidukile
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Diameter [mm]: 45
- Length [mm]: 650
- Tootja: KAVO
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Hulk: 2
- Ehitusaasta alates: 03.2013
- Ehitusaasta kuni: 07.2014
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - General Information: shock absorber; rear; gas
- Tootja: VIKA
- Fitting Position: Rear
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom Yoke
- General Information: shock absorber; rear; gas
- Tootja: VIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Diameter [mm]: 50
- max. length [mm]: 550
- Shock Absorber Mounting Type: Top pin
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Installatsiooni pool: Esisild
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Support plate diameter [mm]: 50
- Tootja: DENCKERMANN AMORTYZATORY
Šassii: kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Front Axle
- Length [mm]: 549
- Length 2 [mm]: 382
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Plate - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Diameter 1 [mm]: 50
- Diameter 2 [mm]: 32
- Spring Type: for vehicles with coil spring suspension
- Tootja: MAGNETI MARELLI
- Nimetus: MM 7521G
- Lisainfo: 7521G MM
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Nimetus: MM 8049G
- Tootja: MAGNETI MARELLI
- Installatsiooni pool: Esisild
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Support plate diameter [mm]: 55
- Tootja: DENCKERMANN AMORTYZATORY
Šassii: kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Front Axle
- Housing Diameter [mm]: 50
- Shock Absorber Type: Gas Pressure
- Article number of recommended accessories: SMJ0196
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Suspension Strut
- Tootja: JAPKO
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- Fitting Position: Front Axle
- Housing Diameter [mm]: 50
- Shock Absorber Type: Gas Pressure
- Article number of recommended accessories: SMA0196
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Suspension Strut
-
Tootja: ASHIKA-
AMORTYZATORY
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
0N4, G04 - Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Length 2 [mm]: 548
- Suspension Strut Outer Diameter [mm]: 50
-
Shock Absorber System: Twin-
Tube -
for PR number: G07,
G11, G16, G21, G24 - Kvaliteediklass: PJ
- Nimetus: Gas shock absorber
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung, sportvedrustusega sõidukile, tavavedrustusega sõidukile
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
0N4, G03 - Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Length 2 [mm]: 548
- Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube -
for PR number: G02,
G06, G25, G28, G29, G32 - Kvaliteediklass: PJ
- Nimetus: Gas shock absorber
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung, sportvedrustusega sõidukile, tavavedrustusega sõidukile
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Nimetus: MM 8048G
- Tootja: MAGNETI MARELLI
- Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
-
PR-numbri jaoks: G01,
G12 - OE-numbri kontrollimine:
- Kogus pakendis: 2
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 51
- Length 1 [mm]: 344
- Length 2 [mm]: 511
- Piston Rod Diameter [mm]: 22
- Quantity per axle: 1
- Observe technical data:
- Tootja: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Shock absorber eyelet diameter [mm]: 45
- max. length [mm]: 650
- Tootja: KYB
- Nimetus: KY 3448025
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata Üldine informatsioon: Please refer to the technical drawing in "Documents"
-
Installatsiooni pool: paremal,
vasakul, Tagasild - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - max. length [mm]: 654
- min. length [mm]: 397
- Standpipe Diameter [mm]: 40
- Piston Rod Diameter [mm]: 12
- Piston Rod Thread: M10x100
- Nimetus: SN SA95413.18
- Tootja: SNR
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Shock absorber eyelet diameter [mm]: 59
- max. length [mm]: 625
- Tootja: KYB
- Nimetus: KY 3448024
- Lisainfo: 3448024 KAYABA
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata Üldine informatsioon: Please refer to the technical drawing in "Documents"
- Šassii: sportvedrustusega sõidukile
-
Installatsiooni pool: paremal,
vasakul, Tagasild - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - max. length [mm]: 705
- min. length [mm]: 445
- Standpipe Diameter [mm]: 45
- Piston Rod Diameter [mm]: 12
- Piston Rod Thread: M10X100
- Tootja: SNR AMORTYZATORY
- Installatsiooni pool: Tagasild
- Telg: Jäik sild
- Shock Absorber Type: Gas Pressure
- Sleeve Length [mm]: 45
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.8
- Bore Diameter [mm]: 25
- Observe technical data:
- Piston Rod Diameter [mm]: 12.4
-
Article number of recommended accessories: MK503,
PK424 - Packaging length [cm]: 50.5
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Tootja: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Installatsiooni pool: Esisild
- Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Tootja: OYODO
- Hulk: 2
- Ehitusaasta alates: 05.2015
- Ehitusaasta kuni: 05.2015
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: shock absorber; front; gas
- Tootja: VIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Diameter [mm]: 55
- Tootja: KAVO PARTS
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata
-
PR-numbri jaoks: 0N1,
G03, G04 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Axle: Rigid Axle
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 19-
232157 - Kvaliteediklass: Q
Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
-
PR-numbri jaoks: 0N1,
G03 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
for PR number: 0K0,
1JA, 1JC - Piston Rod Diameter [mm]: 11
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
- Nimetus: Gas shock absorber
- Kvaliteediklass: Q
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N4,
G03, G04 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Vehicle Equipment: for vehicles without level control
- Length 1 [mm]: 399
- Length 2 [mm]: 625
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 19-
230559 - Kvaliteediklass: Q
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Šassii: tavavedrustusega sõidukile
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
394366, GH- 369964, GH- 399961, GH- 693610 - Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Yoke - Suspension Strut Outer Diameter [mm]: 55
-
Tootja: AUTO-
GH
- Hulk: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
General Information: gas-
filled shock absorber; rear - Tootja: BORSEHUNG
- Installatsiooni pool: Esisild
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 4.43
- Bore Diameter [mm]: 32
- Observe technical data:
- Length 1 [mm]: 382
- Length 2 [mm]: 549
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK411,
PK422 - Packaging length [cm]: 56.8
- Packaging width [cm]: 17.2
- Packaging height [cm]: 17.2
- Housing diameter in clamping area [mm]: 50
- Tootja: MONROE
- Lisainfo: 742116SP MON
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 55
- Tootja: KYB
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, kõrgendatud šassiiga sõidukite jaoks, sõidukitele ilma elektr.vedrustusreguleerijata Üldine informatsioon: Please refer to the technical drawing in "Documents"
- Installatsiooni pool: Tagasild
- Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
- OE-numbri kontrollimine:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SEOV27/
13X217A -
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Axle: Twist-
beam Rear Axle - Supplementary Article/Supplementary Info: without fastening ring
- Tootja: SACHS
- Nimetus: SHS 318203
SVHC: No information available, please contact the manufacturer!
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
0N4, G03 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Length 2 [mm]: 548
-
for PR number: G02,
G06, G25, G28, G29, G32 - Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 22-
230539 - Kvaliteediklass: Q
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
0N4, G04 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Length 2 [mm]: 548
-
for PR number: G07,
G11, G16, G21, G24 - Suspension Strut Outer Diameter [mm]: 50
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 22-
230522 - Kvaliteediklass: Q
Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata, für Fahrzeuge mit Schlechtwegeausführung
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Hulk: 2
- Fitting Position: Front Axle
- Outer Diameter [mm]: 50
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube -
General Information: gas-
filled shock absorber; front - Tootja: BORSEHUNG
- Installatsiooni pool: Esisild
- Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
- OE-numbri kontrollimine:
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST32/
22X175A - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 50
- Tootja: SACHS
OE-numbri jaoks: 5Q0 413 023 EB, 5Q0 413 023 EN, 5Q0 413 023 EP, 5Q0 413 023 EQ, 5Q0 413 023 ER, 5Q0 413 023 ES, 5Q0 413 023 ET, 5Q0 413 023 FH, 5Q0 413 023 FJ, 5Q0 413 023 FK, 5Q0 413 023 FL, 5Q0 413 023 FR, 5Q0 413 023 GJ SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Esisild
- Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
- OE-numbri kontrollimine:
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST36/
25X167A - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 55
- Nimetus: SHS 317330
- Tootja: SACHS
OE-numbri jaoks: 3Q0 413 031 BF, 3Q0 413 031 BG, 3Q0 413 031 BH, 3Q0 413 031 BJ, 3Q0 413 031 BN, 3Q0 413 031 BP, 5Q0 413 031 EP, 5Q0 413 031 EQ, 5Q0 413 031 ER, 5Q0 413 031 FP, 5Q0 413 031 FS, 5QF 413 031 AN, 5QF 413 031 AP SVHC: No information available, please contact the manufacturer!
- Hulk: 2
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
General Information: gas-
filled shock absorber; front - Tootja: BORSEHUNG
-
PR-numbri jaoks: 0N1,
G03, G04 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Axle: Rigid Axle
- Shock Absorber System: Monotube
-
Nimetus: BI 24-
229883 - Tootja: BILSTEIN
Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: G03,
G04 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin
- Length [mm]: 677
-
Axle: Multi-
link Axle - Vehicle Equipment: for vehicles without level control
- for PR number: 0N4
- Shock Absorber System: Monotube
-
Nimetus: BI 24-
229890 - Tootja: BILSTEIN
Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
-
PR-numbri jaoks: G03,
G04 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Axle: Rigid Axle
- for PR number: 0N1
- Shock Absorber System: Monotube
-
Nimetus: BI 24-
229920 - Tootja: BILSTEIN
Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
- PR-numbri jaoks: G03
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
for PR number: G02,
G06, G25, G28, G29, G32 - Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
- Tootja: BILSTEIN
Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
G04 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Length 2 [mm]: 548
-
for PR number: G01,
G07, G16, G21, G24 - Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber System: Single Tube Upside Down
- Tootja: BILSTEIN
-
Nimetus: BI 35-
229865 -
Lisainfo: 35-
229865
Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
- mitte varustusvariandile: Scout
- PR-numbri jaoks: G04
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
for PR number: G01,
G07, G16, G21, G24 - Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber System: Single Tube Upside Down
-
Nimetus: BI 35-
229902 - Tootja: BILSTEIN
Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- mitte varustusvariandile: Scout
-
PR-numbri jaoks: 0N1,
G03 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Length 2 [mm]: 548
-
for PR number: G02,
G06, G25, G28, G29, G32 - Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
- Tootja: BILSTEIN
Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Tootja: BORSEHUNG
General Information: gas-filled shock absorber; electronically controlled; rear
-
PR-numbri jaoks: 0N1,
0N4, G02, G03 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Length 1 [mm]: 372
- Length 2 [mm]: 550
- Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 23-
238978 - Kvaliteediklass: Q
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
-
PR-numbri jaoks: 0N4,
G02, G03 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Axle: Multi-
link Axle - Suspension: for vehicles with electronic suspension control
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 20-
267520 - Kvaliteediklass: Q
-
PR-numbri jaoks: 0N1,
0N4, G02, G03 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 23-
254343
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
-
PR-numbri jaoks: 0N1,
G02, G03 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Axle: Rigid Axle
- Length 1 [mm]: 416
- Length 2 [mm]: 649
-
Shock Absorber System: Twin-
Tube - Tootja: BILSTEIN
-
Nimetus: BI 20-
278731
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog