Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kogus pakendis: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Nimetus: RONGASTIHEND
- Tootja: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Netosügavus [mm]: 22
- Netopikkus [mm]: 650
- Netolaius [mm]: 328
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: IBIZA V (kvaliteediklass PJ)
- Kogus pakendis: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Värv: sinine
-
Surve (bar): 1,
4 - Materjal: Plastik
-
Kaal (kg): 0,
112 - Tootja: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Nimetus: Radiator
- Kvaliteediklass: P
Lisainfo: IBIZA V (kvaliteediklass P)
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Tootja: KAMOKA
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: MAX
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Supplementary Article/Info 2: with mounting parts
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 650*328*26
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
- Netopikkus [mm]: 655
- Netolaius [mm]: 340
- Netosügavus [mm]: 32
- Tootja: JPN
- Material: Aluminium
- Core Length [mm]: 649
- Core Width [mm]: 342
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 650*340*23
- Käigukasti liik: Käigukast
- Radiator type: Mechanically jointed cooling fins
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 328
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Tootja: TYC
- Mootorikood: CJZC
- Core Width [mm]: 342
- Core Length [mm]: 649
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Nimetus: MM BM1823
- Tootja: MAGNETI MARELLI
- Core Width [mm]: 650
- Core Length [mm]: 340
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.01
- Tootja: VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 648
- Core Width [mm]: 326
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
648x326 mm, PL/ ALU
- Küte/Jahutus: Lisaradiaator
- Material: Aluminium
- Core Length [mm]: 88
- Core Width [mm]: 645
- Core Depth [mm]: 56
- Radiator type: Brazed cooling fins
-
Nimetus: Radiaator,
mootorijahutus - Tootja: MAX
- Lisainfo: AC314875
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Netosügavus [mm]: 26
- Netopikkus [mm]: 648
- Netolaius [mm]: 328
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: A1 (kvaliteediklass PJ)
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 322
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
- Nimetus: NI 640012
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 649
- Core Width [mm]: 340
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Cooling fins material: Aluminium
- Manufacturer: MAHLE
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
529 - Packaging height [cm]: 48.5
- Packaging length [cm]: 83.5
-
Nimetus: Radiaator,
mootorijahutus - Tootja: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Hulk: 1
- Materjal tihend: Plii
- Netosügavus [mm]: 0
- Netopikkus [mm]: 0
- Netolaius [mm]: 0
- Üldine informatsioon: radiator; lead welding
- Tootja: VIKA
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 16
- Water Tank Material (radiator): Plastic
- Supplementary Article/Info 2: with screw
- Packaging height [cm]: 10.5
-
Net Weight [g]: 2,
638 - Packaging width [cm]: 44.5
- Packaging length [cm]: 88
- Tootja: MAHLE
- Nimetus: MH CR2081000S
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 89
- Packaging width [cm]: 22
- Packaging height [cm]: 17
- Weight [kg]: 1.44
-
for OE number: 6R0145805E,
6R0145805H - Tootja: AKSDASIS
- Küte/Jahutus: Lisaradiaator
- Material: Aluminium
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
- Lisainfo: 646*86*56
- Cooling fins material: Aluminium
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
-
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Küte/Jahutus: Lisaradiaator
- Core Width [mm]: 646
- Core Length [mm]: 86
- Core Depth [mm]: 56
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Heating/Cooling: for vehicles without oil cooler
- Weight [kg]: 2.05
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: VAL
- Radiator type: Brazed cooling fins
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Version: Charge Air Cooler
- Tootja: TYC OWIETLENIE
- Ehitusaasta kuni: 07.2018
- Mootorikood: CJZC
- Käigukasti liik: Käigukast 5 käiku
- Core Length [mm]: 646
- Core Depth [mm]: 56
- Core Width [mm]: 88
- Radiator type: Brazed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Nimetus: MM BM1668
- Tootja: MAGNETI MARELLI
- Netosügavus [mm]: 56
- Netopikkus [mm]: 645
- Netolaius [mm]: 88
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Kvaliteediklass: PJ
- Nimetus: Radiator
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog