• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikkontaktide arv: 6
• Piirangutega toode/piirangu info 2: ilma kaablita, koos plastiksokliga
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piirangutega toode/piirangu info 2: koos pistikuga, ilma kaablita
• OE-numbri jaoks: 4D0971993
• Pistikkontaktide arv: 3
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: DADA
• Värvimarkeering: hall
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: DADA
• Värvimarkeering: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• OE-numbri jaoks: 4D0971993
• Piirangutega toode/piirangu info 2: koos pistikuga, koos kaabliga
• Pistikkontaktide arv: 3
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistiku värv: must
• Seerianumber: ESS-VW-000
• Tootja: NTY

• Kaal (kg): 0,48
• Ühenduste arv: 2
• Värv: must
• Üldine informatsioon: knock sensor
• Tootja: VIKA

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 030 905 377 C, YM21 12A699 BA
• Tootja: MEAT&DORIA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 2
• Tootja: ERA

• Hulk: 2
• Number of pins: 3
• Nimetus: DE SS12308-12B1
• Tootja: DELPHI

• Ehitusaasta alates: 10.2018
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Mootorikood: DADA
• vajaminev tükihulk: 1
• Korpusevärv: must
• Nimetus: EP 1.957.144
• Tootja: EPS

• Mootorikood: DADA
• vajaminev tükihulk: 1
• Korpusevärv: must
• Tootja: FACET

• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Üldine informatsioon: hall sender camshaft
• Tootja: VIKA

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10169

• vajaminev tükihulk: 1
• Mootorikood: DADA
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PG013114301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Ehitusaasta alates: 10.2018
• Ehitusaasta kuni: 06.2024
• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• vajaminev tükihulk: 2
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Tootja: BREMI

• Number of connectors: 4
• Weight [kg]: 0.026
• for OE number: 04C 906 051
• Nimetus: SW 33 10 4255
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Üldine informatsioon: pressure difference sender
• Tootja: BORSEHUNG

• Ehitusaasta alates: 10.2018
• Ehitusaasta kuni: 06.2024
• Tootja: BOSCH

• Lambda andur: Diagnoosisond
• Installatsiooni pool: pärast katalüsaatorit
• Kaablipikkus (mm): 970
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Ühendushulk: 4
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV126

• vajaminev tükihulk: 2
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• Hulk: 1
• Number of pins: 3
• Tootja: DELPHI ELEKTRONIKA

• Lambda andur: Diagnoosisond, Titaanandur, soojendatud
• Heitgaaside normatiiv: Euro 6
• Installatsiooni pool: pärast katalüsaatorit
• Hulk: 1
• PR-numbri jaoks: 7CP, 7MV
• Kaablipikkus (mm): 700
• Tootja: DELPHI

Tootja: NRF

• vajaminev tükihulk: 1
• Mootorikood: DADA
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG009108561
• Tootja: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Installatsiooni sügavus (mm): 24
• Pistikkontaktide arv: 3
• Versioon: IAM
• Tootja: METZGER

• Number of pins: 3
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO
• Nimetus: HU 138252

• PR-numbri jaoks: TJ7
• Kinnitusaukude hulk: 2
• Installatsiooni pool: Imitoru
• Tootja: METZGER

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: VAL

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• Mootorikood: DADA
• Installatsiooni pool: pärast katalüsaatorit
• Heitgaaside normatiiv: Euro 6
• vajaminev tükihulk: 1
• PR-numbri jaoks: 7CP, 7MV
• Kaablipikkus (mm): 800
• Ühendushulk: 4
• Piirangutega toode/piirangu info 2: koos kinnitusmaterjaliga
• ka universaaltootena saadav vaata toode-nr.: 1.997.008
• Ülekandeliinide arv: 4
• Nimetus: LAMBDA ANDUR
• Tootja: EPS

Lambda andur: Diagnoosisond, soojendatud, Titaanandur, Keere eelmääritud

• Ehitusaasta kuni: 05.2023
• Number of connectors: 3
• Weight [kg]: 0.01
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Sond, Lineaarne lambda andur, soojendatud
• Heitgaaside normatiiv: Euro 6
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• PR-numbri jaoks: 7MV
• Kaablipikkus (mm): 455
• Tootja: DELPHI
• Nimetus: DE ES21114-12B1

• Lambda andur: Sond, Keere eelmääritud
• Pikkus (mm): 650
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-VW-005
• Tootja: NTY

Lisainfo: ENG. 1.0TSI,1.5TSD VW POLO 17-,GOLF VII 17-,T-CROSS 18-,T-ROCK 17-, AUDI A3 17-, SKODA OCTAVIA III 17-, KAROQ 17-,KAMIQ 19-, SEAT ARONA 17-,IBIZA V 17-/SONDA REGULACYJNA,PRZED KATALIZATOREM,Dœ.CAœK.650MM

• Üldine informatsioon: rain and humidity sensor
• Tootja: BORSEHUNG

• Lambda andur: Bistabiilne andur
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Tootja: VIKA

• Pinge [V]: 12
• OE-numbri jaoks: 04L907807EE
• Installatsiooni pool: pärast heitgaaside turbokompressorit
• Kaablipikkus (mm): 845
• Pistikkontaktide arv: 5
• Pistikukatte kuju: ovaalne
• Kinnitusaukude hulk: 2
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 07.2019
• vasak/paremroolimine: parempoolse roolimise jaoks
• Väljalaskesüsteem: katalüsaatori ees
• PR-numbri jaoks: 7CP
• Pinge [V]: 12
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Kaablipikkus (mm): 890
• Pistikkontaktide arv: 5
• Pistikukatte kuju: ovaalne
• Garantii: 3 aastat garantii
• Kaal (kg): 0,34
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 71SKV068

• vajaminev tükihulk: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring