• Installatsiooni pool: Esisild, sees, silla ees, vasakul, paremal, all
• Seerianumber: ZTP-VW-001A
• Tootja: NTY

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 48, 28
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Outer Diameter [mm]: 40
• Weight [kg]: 0.153
• Inner Diameter [mm]: 12
• Fitting Position: both sides, Front Axle, Front
• Nimetus: TG 00727632
• Tootja: TEDGUM

• Installatsiooni pool: esisild vasakul, all, esisild paremal
• for OE number: 1K0 407 182
• Tootja: GSP

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Nimetus: COC 80005079
• Tootja: CORTECO

• Roolimisliik: õõtshoova jaoks
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, esisild paremal
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Jämedus/Tugevus (mm): 45
• Materjal: Kumm/metall
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 38, 24
• Laagritüüp: Kummi-metalllaager
• Seerianumber: ZTT-VW-006A
• Tootja: NTY

Installatsiooni pool: Tagasild, üleval, sees, Tagasild vasakul, Tagasild paremal

• Välisläbimõõt [mm]: 60
• PR-numbri jaoks: 2H0, 2H5
• Installatsiooni pool: Tagasild
• Mounting Type: Rubber-Metal Mount
• Tootja: DELLO AUTOMEGA

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Tootja: BGA

• Kogus pakendis: 2
• Axle alignment required after fitting:
• Fitting Position: Rear Axle Upper, inner
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.05
• Outer Diameter [mm]: 38.05
• Control/Trailing Arm Type: for control arm
• for OE number: 1K0 505 279 A
• Weight [kg]: 0.081
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 239
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Nimetus: IM 1620
• Tootja: ORIGINAL IMPERIUM

• Installatsiooni pool: Esisild, sees, silla ees, all
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Tootja: DELPHI
• Nimetus: DE TD521W

• Installatsiooni pool: Esisild, all, ees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 40
• Kõrgus (mm): 54
• Nimetus: ALT 81191AL
• Tootja: ALTE AUTOMOTIVE

• Tootmise kuupäev alates: 04/15
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Tootja: SASIC
• Lisainfo: 9001759

• Installatsiooni pool: Esisild, kese
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,18
• Nimetus: DY 37-06068-6
• Tootja: DYS

• Outer Diameter [mm]: 38.8
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Required quantity: 2
• Fitting Position: Rear Axle Upper, inner
• Weight [kg]: 0.14
• Nimetus: TG 00720919
• Tootja: TEDGUM

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Tootja: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, all, väljas
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 38
• Kõrgus (mm): 50
• Nimetus: ALT 94739AL
• Tootja: ALTE AUTOMOTIVE

• OE-numbri jaoks: 5Q0407182
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Nimetus: DA DSS1079
• Tootja: DAYCO

• Fitting Position: Rear
• General Information: bonded rubber bush
• Tootja: BORSEHUNG

• Fitting Position: Front, both sides, Rear Axle
• Control/Trailing Arm Type: for trailing arm
• Inner Diameter [mm]: 12
• Weight [kg]: 0.17
• Required quantity: 2
• Outer Diameter [mm]: 60.2
• Tootja: TEDGUM

• Piduri-/sõidudünaamika: ilma Adaptive Drive´ta sõidukite jaoks
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Tootja: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Quantity per axle: 2
• for OE number: 5Q0 407 182
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• PR-numbri jaoks: 2H0, 2H5
• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Tootja: LEMFORDER

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 115
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Nimetus: IM 1724
• Tootja: ORIGINAL IMPERIUM

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: outer, Rear Axle Upper
• Required quantity: 2
• Outer Diameter [mm]: 38.4
• Inner Diameter [mm]: 14
• Weight [kg]: 0.13
• Nimetus: TG 00720904
• Tootja: TEDGUM

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.071
• Tootja: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, üleval, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 38
• Kõrgus (mm): 45
• Nimetus: ALT 88666AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild, all, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 60
• Kõrgus (mm): 64
• Nimetus: ALT 91581AL
• Tootja: ALTE AUTOMOTIVE

• Tootmise kuupäev alates: 04/15
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Tootja: SASIC

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Nimetus: SW 30 92 9682
• Tootja: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tootmise kuupäev alates: 04/15
• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Tootja: SASIC

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Nimetus: SW 30 92 9689
• Tootja: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Centre, inner, Rear Axle
• Weight [kg]: 0.23
• Packaging length [cm]: 6
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Tootja: FEBEST

• Fitting Position: Rear
• General Information: bonded rubber bush
• Tootja: BORSEHUNG

• Fitting Position: Lower
• General Information: bonded rubber bush
• Tootja: BORSEHUNG

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.121
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.9
• Tootja: FEBEST

• Installatsiooni pool: ees
• Üldine informatsioon: wishbone arm; front
• Tootja: VIKA

• Fitting Position: outer, Rear Axle Lower
• Weight [kg]: 0.185
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.8
• Packaging height [cm]: 3.8
• Tootja: FEBEST

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Tootja: LEMFORDER
• Nimetus: LMI 3772001

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Base body material: Steel
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 13
• Width [mm]: 50
• Quantity per axle: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear, Left, Right, Front Axle
• Weight [g]: 352
• Outer Diameter 2 [mm]: 65
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 30
• Length [mm]: 50
• Nimetus: IM 1308
• Tootja: ORIGINAL IMPERIUM

• Installatsiooni pool: Tagasild, väljas, all
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Tootja: FAG
• Nimetus: LU 829064010

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEYLE

• Piduri-/sõidudünaamika: ilma Adaptive Drive´ta sõidukite jaoks
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 49
• Width [mm]: 37
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.13
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• PR-numbri jaoks: 2H0, 2H5
• Tootja: LEMFORDER
• Nimetus: LMI 3977101

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, Rear
• Weight [kg]: 0.167
• Packaging length [cm]: 5
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Tootja: FEBEST

• Installatsiooni pool: üleval, Tagasild vasakul, Tagasild paremal
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 45
• Siseläbimõõt [mm]: 15
• Välisläbimõõt [mm]: 24, 38
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Piduri-/sõidudünaamika: ilma Adaptive Drive´ta sõidukite jaoks
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Nimetus: SW 33 10 2842
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: üleval, Tagasild vasakul, Tagasild paremal
• Materjal: Kumm/metall
• Jämedus/Tugevus (mm): 45
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 24, 38
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild, all, ees
• Šassii: tavavedrustusega sõidukile
• Sõidukivarustus: sõidukitele ilma Drive-Select süsteemita
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Tootja: FAG

• Thickness [mm]: 60
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 44.5
• Material: Rubber/Metal
• Weight [kg]: 0.115
• Tootja: FEBI BILSTEIN

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kaal (kg): 0,18
• Installatsiooni pool: Tagasild mõlemapoolselt, all, ees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Läbimõõt 1 (mm): 12,1
• Läbimõõt 2 (mm): 60,3
• Pikkus (mm): 63,8
• Tootja: RTS

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Kaal (kg): 0,342
• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

• Installatsiooni pool: Tagasild mõlemapoolselt, sees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Välisläbimõõt [mm]: 40
• Siseläbimõõt [mm]: 12,2
• Pikkus (mm): 60
• Kaal (kg): 0,087
• Tootja: RTS

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, all
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,11
• Nimetus: DY 37-27718
• Tootja: DYS

• Installatsiooni pool: Esisild, all, taga
• Siseläbimõõt [mm]: 13
• Välisläbimõõt [mm]: 65
• Kõrgus (mm): 50
• Nimetus: ALT 88894AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: silla taga, esisild vasakul, esisild paremal, all
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.8
• Length [mm]: 50
• paired article number: 271402
• Weight [kg]: 0.34
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Required quantity: 2
• Inner Diameter [mm]: 13
• Fitting Position: Front Axle, both sides, Rear
• Weight [kg]: 0.33
• Outer Diameter [mm]: 65.2
• Tootja: TEDGUM

• kombineeritud PR-numbrile: 2H0,2H5
• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.23
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Tootja: FEBEST

• Kaal (kg): 0,26
• Installatsiooni pool: esisild mõlemapoolselt, all, taga
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 13
• Välisläbimõõt [mm]: 64,7
• Pikkus (mm): 50
• Tootja: RTS

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.302
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, all, silla ees
• PR-numbri jaoks: 2H0, 2H5
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Nimetus: DE TD1785W
• Tootja: DELPHI

• Installatsiooni pool: Esisild
• Üldine informatsioon: bushing
• Tootja: VIKA

• Fitting Position: Rear Axle Upper, behind the axle, inner
• Weight [kg]: 0.207
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Width [mm]: 45
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.07
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 60
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.09
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, kahepoolne, taga
• Fitting Position: both sides, Rear, Front Axle
• Weight [kg]: 0.36
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Tootja: MONROE

• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,51
• Nimetus: DY 37-26231
• Tootja: DYS

• Supplementary Article/Info 2: with grease cap
• Fitting Position: Rear Axle, Front, both sides
• Colour: yellow
• Control/Trailing Arm Type: for trailing arm
• Shore-A hardness value, base body: 90
• Required quantity: 2
• Weight [kg]: 0.31
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60.4
• Material: PU (Polyurethane)
• Nimetus: TG TED37720
• Tootja: TEDGUM