• Sissepritsesüsteem: MPI (MultiPoint)
• Number of pins: 2
• Colour: blue
• Tootja: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Tootja: JP GROUP A/S
• Lisainfo: Hall sender

• Lülituspunkt [°C]: 140
• Keerme samm (mm): 1,5
• Keermemõõt: M 12
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värvimarkeering: sinine
• Materjal: Vask
• Pistikukatte kuju: ristkülik
• Üldine informatsioon: temperature sensor; cooper
• Tootja: VIKA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Supplementary Article/Info 2: with seal ring
• for OE number: 1331294
• Tootja: KAMOKA

• for OE number: 357919501A
• Tootja: KAMOKA

• Hulk: 1
• Kaal (kg): 0,041
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Värv: kollane
• Värvimarkeering: sinine
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; yellow
• Tootja: VIKA

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: blue
• Diameter [mm]: 25.5
• Fitted Diameter [mm]: 20
• for OE number: 025 906 041 A, 95VW-12A648-BA, A 002 542 07 18
• Tootja: MEAT&DORIA

• Hulk: 1
• Kaal (kg): 0,041
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Värv: sinine
• Värvimarkeering: sinine
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; blue
• Tootja: VIKA

• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Tootja: NRF

Tootja: FAE

• Värv: kollane
• Mootorikood: AEE
• Housing Colour: black
• Number of pins: 4
• Tootja: DELPHI
• Nimetus: DE TS10245-12B1

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Tootja: NRF

• Tootmise kuupäev alates: 04/96
• tootmise kuupäev kuni: 08/99
• for OE number: 1331294
• Tootja: SASIC

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.023
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501A
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.023
• Nimetus: SW 30 93 0616
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• OE-numbri jaoks: 357 919 501 A
• Laius (mm): 33
• Kõrgus (mm): 30
• Pikkus (mm): 58
• Kaal (g): 36
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 4
• Tootja: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: METZGER

• Korpusevärv: must
• Värvimarkeering: kollane
• Vastab originaalosa värvile: sinine, kollane
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: koos tihendiga
• soovitava lisavarustuse artiklinumber: 0905458
• Versioon: IAM
• Võimsus [W]: 0,06
• Tootja: METZGER

• Number of pins: 2
• Fitted Diameter [mm]: 20
• Housing Colour: blue
• Tootja: FAE

• Pressure from [kPA]: 20
• Pressure to [kPA]: 11
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Colour Coding: blue
• Tootja: MAGNETI MARELLI
• Nimetus: MM SPA106

• Keermemõõt: M12 x 1,5
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Tootja: FAE ELEKTRYKA

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• Ehitusaasta alates: 01.1996
• Number of pins: 2
• Socket colour: black
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Spanner Size: 19
• Tootja: MEAT & DORIA

for OE number: 13 62 1 711 371, 046 905 379, 37880-P5T-G00, 1430.80, 504366815

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Tootja: MAGNETI MARELLI
• Nimetus: MM SPA104

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Diameter [mm]: 25
• Length [mm]: 42
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 6U0 919 501 B
• Colour Coding: blue
• Number of pins: 4
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulk: 1
• Switch Point [°C]: 140
• Outer Diameter [mm]: 20
• Weight [kg]: 0.023
• Number of connectors: 4
• Colour: black
• Colour Coding: yellow
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 32 93 9142
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,09
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV201
• Tootja: ESEN SKV

• Ehitusaasta alates: 01.1996
• Thread Size: M12 x 1,5
• Resistor [Ohm]: 2,500
• Spanner Size: 19
• Weight [kg]: 0.026
• Tootja: VEMO
• Lisainfo: V20-72-0459

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Termostaat
• Thread Size: 20 mm
• Tootja: VERNET

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Colour Coding: black
• Nimetus: MM SPA110
• Tootja: MAGNETI MARELLI

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Colour Coding: blue, yellow
• Corresponds to the original part in colour: yellow, blue, black
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PT009107421

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Hulk: 1
• Üldine informatsioon: impulse sender for distribustor
• Tootja: VIKA

• Mootorikood: AEE
• Värv: kollane
• Korpusevärv: must
• Corresponds to the original part in colour: yellow, blue, black
• Nimetus: EP 1.830.146
• Tootja: EPS

• Mootorikood: AEE
• Värv: kollane
• Korpusevärv: must
• Corresponds to the original part in colour: yellow, blue, black
• Tootja: FACET

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Ehitusaasta alates: 01.1996
• Thread Size: M12x1,5
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• Tootja: FAE

• Manufacturer Restriction: Bosch
• Tootja: DELLO AUTOMEGA

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV104
• Tootja: ESEN SKV

• Mootorikood: AEE
• Värv: must
• Piirangutega toode/piirangu info: koos hoidjaga
• Pistikkontaktide arv: 3
• Materjal: Plastik
• Tootja: ERA

• Hulk: 1
• Üldine informatsioon: sender for fuel gauge
• Tootja: VIKA

• Pistikkontaktide arv: 4
• Tootja: JPN

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 5946 21, 004 153 90 28, 89615 05010
• Tootja: MEAT&DORIA

• Ehitusaasta kuni: 12.1997
• Number of pins: 3
• Weight [kg]: 0.08
• Nimetus: VA 366130
• Tootja: VALEO

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV117

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV134

• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Ülekandeliinide arv: 4
• juhtmeisolatsiooni materjal: Silikoon
• Materjal: CuSn (vask-tina)
• Kaablipikkus (mm): 250
• Kaabli ristlõige alates [mm²]: 0,5
• Kaabli ristlõige kuni [mm²]: 0,5
• Tootja: 3RG

• Number of pins: 4
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• for OE number: 03D906051A
• Tootja: DELLO AUTOMEGA

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.55
• Measuring Range to [V]: 4.55
• Number of connectors: 4
• Tootja: VERNET

• Pistikkontaktide arv: 4
• Tootja: JPN

Tootja: MAGNETI MARELLI

• Mootorikood: AEE
• valikuliselt:
• Pistikkontaktide arv: 2
• alternatiivne remondikomplekt: 550777
• Tootja: ERA

• valikuliselt:
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 17
• Surve kuni [kPA]: 117
• Kaal (kg): 0,025
• alternatiivne remondikomplekt: 550237
• Tootja: ERA

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 120
• for OE number: 03D 906 051, 03D 906 051A
• Tootja: MEAT&DORIA

• vajaminev tükihulk: 1
• Tootja: BREMI

• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 5946 23, 55353316, 003 153 89 28, 6235703
• Tootja: MEAT&DORIA

Tootja: MAGNETI MARELLI

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10171

• Number of connectors: 2
• Weight [kg]: 0.045
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AEE
• Nimetus: EP 1.957.001
• Tootja: EPS

• Mootorikood: AEE
• Tootja: FACET

• Ehitusaasta alates: 10.1995
• Tootja: BOSCH

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114361
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 15
• Pressure to [kPA]: 120
• for OE number: 036 906 051
• Tootja: MEAT&DORIA

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Tootja: KAMOKA

• valikuliselt:
• Pistikkontaktide arv: 4
• Surve alates [kPA]: 20
• Surve kuni [kPA]: 120
• Kaal (kg): 0,02
• alternatiivne remondikomplekt: 550194
• Tootja: ERA

• Installatsiooni pool: Tagasild
• Overall Length [mm]: 1,285
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,240
• paired article number: 30325
• Weight [kg]: 0.12
• Tootja: A.B.S.

• Number of connectors: 4
• Weight [kg]: 0.02
• for OE number: 036 906 051
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Pressure from [kPA]: 21
• Nimetus: DE PS10146
• Tootja: DELPHI

• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Ülekandeliinide arv: 4
• Materjal: CuSn (vask-tina)
• Kaablipikkus (mm): 250
• Kaabli ristlõige alates [mm²]: 0,5
• Kaabli ristlõige kuni [mm²]: 0,5
• juhtmeisolatsiooni materjal: Silikoon
• Piirangutega toode/piirangu info: surve-pressliidesega
• Tootja: METZGER

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Tootja: ASHIKA
• Lisainfo: 43-U04

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Tootja: JAPKO

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 4

• Mootorikood: AEE
• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Tootja: VDO

• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: AEE
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.132
• Socket colour: black
• Number of circuits: 4
• Connector Shape: rectangular
• for OE number: 6U0 906 265 D
• Thread Size: M18 x 1,5
• Cable Length [mm]: 470
• Length [mm]: 570
• Number of pins: 4
• Number of connectors: 4
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.