• Fitting Position: Rear Axle
• Height [mm]: 160
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Fitting Position: Front Axle
• Lisainfo: Antud 1 tk hind.

• Fitting Position: Rear Axle
• Height [mm]: 180
• Lisainfo: Protection sleeve for shock absorber, rear

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock Absorber

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• PR-numbri jaoks: 1JB
• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 162
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Kaal (kg): 0,041
• vajaminev tükihulk: 2
• Üldine informatsioon: protective pipe; rear
• Tootja: VIKA

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 221.5
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Height [mm]: 215
• Material: Thermoplast
• Tootja: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Tootja: GSP

• Šassii: tugevdatud šassiiga sõidukile
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Tootja: BORSEHUNG

• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Nimetus: SW 30 60 0038
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Height [mm]: 179
• SVHC: No SVHC present!
• Nimetus: LU 810012610
• Tootja: FAG

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.069
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0513425
• Fitting Position: Rear Axle
• Height [mm]: 162
• Required quantity: 2
• Material: Thermoplast
• Weight [g]: 57
• Diameter 1 [mm]: 36
• Diameter 2 [mm]: 56
• Nimetus: IM 37265
• Tootja: ORIGINAL IMPERIUM

• for OE number: 1J0513425A
• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• Material: Thermoplast
• Weight [g]: 58
• Diameter 1 [mm]: 37
• Diameter 2 [mm]: 56
• Nimetus: IM 37372
• Tootja: ORIGINAL IMPERIUM

• Installatsiooni pool: ees
• Pikkus (mm): 210
• Kaal (kg): 0,08
• Materjal: Kumm
• Kaal (g): 80
• Siseläbimõõt 1 [mm]: 18
• Siseläbimõõt 2 (mm): 71
• Tootja: METALCAUCHO

• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: LEMFORDER
• Nimetus: LMI 2039001

SVHC: No information available, please contact the manufacturer!

• PR-numbri jaoks: 1JD
• Mudeliaasta alates: 2001
• Fitting Position: Rear Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 27.4
• Packaging width [cm]: 5.6
• Packaging height [cm]: 5.6
• Tootja: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Nimetus: CFD 563402
• Tootja: DACO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• tugevdatud variant:
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Tootja: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: ülemine tihvt, Silma all
• soovitava lisavarustuse artiklinumber: SMJ0132
• Amort-Ehitusliik: Teleskoop-amort
• Tootja: JAPKO

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: SMA0132
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile, ilma sportvedrustuseta sõidukitele

• PR-numbri jaoks: 1JH, UA3
• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 667
• Length 2 [mm]: 436
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Šassii: tugevdatud šassiiga sõidukile
• PR-numbri jaoks: 1JB
• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 655
• Length 2 [mm]: 416
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Šassii: für Fahrzeuge mit Schlechtwegeausführung, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV KOM.
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile, ilma sportvedrustuseta sõidukitele

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

Šassii: sportvedrustusega sõidukile, tavavedrustusega sõidukile

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: OYODO

• Ehitusaasta kuni: 06.2004
• Plokieraldus:
• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, sportvedrustusega sõidukile

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Nimetus: CFD 454710
• Tootja: DACO

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Šassii: sõidukitele ilma tugevdatud šassiita
• PR-numbri jaoks: 1JD
• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 649
• Length 2 [mm]: 410
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Tootja: DENCKERMANN AMORTYZATORY

• Ehitusaasta kuni: 06.2004
• Plokieraldus:
• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Üldine informatsioon: shock absorber; rear; oil
• Tootja: VIKA

• PR-numbri jaoks: 1GE, G06, G15, G33
• Kogus pakendis: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 50
• Length 1 [mm]: 525
• Length 2 [mm]: 355
• Piston Rod Diameter [mm]: 22
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: OYODO

Šassii: tugevdatud šassiiga sõidukile, tavavedrustusega sõidukile

• Installatsiooni pool: Esisild
• Plokieraldus:
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Tootja: OYODO

Šassii: für Fahrzeuge mit Schlechtwegeausführung, tavavedrustusega sõidukile

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0144
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA-AMORTYZATORY

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: KYB
• Nimetus: KY 9430018

Šassii: ilma sportvedrustuseta sõidukitele, für Fahrzeuge ohne Schlechtwegeausführung

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 50
• Length 1 [mm]: 525
• Length 2 [mm]: 355
• Piston Rod Diameter [mm]: 20
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-364708, GH-364709, GH-694702
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, ilma sportvedrustuseta sõidukitele

• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Diameter [mm]: 25
• Length 1 [mm]: 448
• Length 2 [mm]: 668
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Tootja: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Šassii: für Fahrzeuge mit Schlechtwegeausführung, tavavedrustusega sõidukile Lisainfo: "Tootja: SRL
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"

• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-364708, GH-364709, GH-694702
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt
• Tootja: AUTO-GH

Šassii: tavavedrustusega sõidukile, ilma sportvedrustuseta sõidukitele

• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Suspension strut, complete, front

• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• soovitava lisavarustuse artiklinumber: SMJ0144
• Amort-kinnitusliik: ülemine tihvt
• Amort-Ehitusliik: Vedruamort
• Tootja: JAPKO

• Šassii: tavavedrustusega sõidukile
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Tootja: KAVO PARTS

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Üldine informatsioon: shock absorber; rear; gas
• Tootja: VIKA

• Fitting Position: Rear Axle
• Length [mm]: 672
• Length 2 [mm]: 449
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Tootja: MAGNETI MARELLI

• Mudeliaasta kuni: 2000
• kombineeritud PR-numbrile: G06,G33
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 10.8
• Packaging length [cm]: 51
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Tootja: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Tootja: BILSTEIN
• Nimetus: BI 19-068633
• Kvaliteediklass: Q

Šassii: tavavedrustusega sõidukile, für Fahrzeuge mit Schlechtwegeausführung Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"