• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: DKZA
• Värvimarkeering: hall
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: DKZA
• Värvimarkeering: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 24
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fabrication Number: ECP-AU-029
• Tootja: NTY

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Sõidukitüüp: Kodiaq
• Hulk: 2
• Plokieraldus:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Number of connectors: 2
• Tootja: ERA

• General Information: camshaft position sensor
• Tootja: BORSEHUNG

• Mootorikood: DKZA
• Korpusevärv: hall
• Korpusetüüp: Alumiiniumkorpus
• Tootja: FACET

• General Information: pressure sensor
• Tootja: BORSEHUNG

• Hulk: 2
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11473

• Pistikkontaktide arv: 4
• Tootja: JPN

• Mootorikood: DKZA
• Korpusevärv: hall
• Korpusetüüp: Alumiiniumkorpus
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: EPS

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Tootja: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• PR-numbri jaoks: TD3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• vajaminev tükihulk: 2
• Sõidukitüüp: Kodiaq
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• vajaminev tükihulk: 1
• Nimetus: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Tootja: BRM

• Üldine informatsioon: hall sender camshaft
• Tootja: VIKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Tootja: FAE ELEKTRYKA

• Mootorikood: DKZA
• vajaminev tükihulk: 2
• Nimetus: EP 1.953.793
• Tootja: EPS

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Tootja: HUCO

• vajaminev tükihulk: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Mootorikood: DKZA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Nimetus: ANDUR, HEITGAASISURVE
• Tootja: EPS

• Mootorikood: DKZA
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Tootja: FACET

• General Information: pressure sensor
• Tootja: BORSEHUNG

• Mootorikood: DNNA
• Ehitusaasta alates: 11.2020
• Nimetus: Andur, v„ntvoll
• Tootja: BOS

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: VDO

• Mootorikood: DKZA
• Number of pins: 2
• Colour: black
• Nimetus: Detonatsiooniandur
• Tootja: VDO

• Hulk: 1
• Number of pins: 4
• Pressure from [kPA]: 16
• Nimetus: DE PS20088-12B1
• Tootja: DELPHI

• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 175
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• Mootorikood: DKZA
• Tootja: BOSCH

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PP358152251
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: FAE

Tootja: NRF

• Piirangutega toode/piirangu info 2: ilma kaablita
• Installatsiooni sügavus (mm): 24
• Pistikkontaktide arv: 3
• Versioon: IAM
• Tootja: METZGER

• General Information: pressure sensor
• Tootja: BORSEHUNG

• Mootorikood: DKZA
• PR-numbri jaoks: 7CS
• Installatsiooni pool: pärast katalüsaatorit
• Heitgaaside normatiiv: Euro 6
• vajaminev tükihulk: 1
• Lambda andur: Diagnoosisond
• Cable Length [mm]: 800
• Conductor Number: 4
• Oxygen Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Nimetus: EP 1.998.499
• Tootja: EPS

• Operating Mode: Electric
• Voltage [V]: 12
• Nimetus: ANDUR,OHUVOTU ROHK
• Tootja: PIE

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• PR-numbri jaoks: 7MM
• Cable Length [mm]: 570
• Oxygen Sensor: Broadband oxygen sensor, Heated
• Nimetus: DE ES21183-12B1
• Tootja: DELPHI

• Oxygen Sensor: Regulating Probe
• Number of pins: 5
• Fitting Position: Exhaust Manifold
• Fabrication Number: ESL-VW-000
• Tootja: NTY

• Guarantee: 3 years guarantee
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 07SKV230
• Tootja: ESEN SKV

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• PR-numbri jaoks: 7MM
• valikuliselt:
• Cable Length [mm]: 570
• Oxygen Sensor: Broadband oxygen sensor, Heated
• Tootja: DELPHI
• Nimetus: DE ES21181-12B1

• General Information: rain and humidity sensor
• Tootja: BORSEHUNG

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• PR-numbri jaoks: 7MM
• Cable Length [mm]: 585
• Oxygen Sensor: Planar probe, Heated
• Nimetus: DE ES21394-12B1
• Tootja: DELPHI

• PR-numbri jaoks: DQ6
• Installatsiooni pool: Tahmaosakeste filter
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Tootja: METZGER

• Lambda andur: Bistabiilne andur
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Tootja: VIKA

• Installatsiooni pool: enne tahmafiltrit
• Mootorikood: DKZA
• Number of pins: 3
• Cable Length [mm]: 845
• Sensor Type: PTC
• Nimetus: CZUJNIK TEMP. SPALIN VW TIGUAN 16-
• Tootja: MEY

• Mootorikood: DKZA
• Installatsiooni pool: katalüsaatori ees
• Heitgaaside normatiiv: Euro 6, Euro 6+
• vajaminev tükihulk: 1
• Lambda andur: Sond
• PR-numbri jaoks: 7CP, 7CS, 7MM
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Nimetus: EP 1.998.552
• Tootja: EPS

Oxygen Sensor: Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Mootorikood: DKZA
• Installatsiooni pool: katalüsaatori ees
• Heitgaaside normatiiv: Euro 6, Euro 6+
• vajaminev tükihulk: 1
• Lambda andur: Sond
• PR-numbri jaoks: 7CP, 7CS, 7MM
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Tootja: FACET

Oxygen Sensor: Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Üldine informatsioon: air mass meter
• Tootja: VIKA

• General Information: air mass meter
• Tootja: BORSEHUNG

• Mootorikood: DKZA
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Overall Length [mm]: 700
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Lambda andur: Sond
• Mootorikood: DKZA
• Installatsiooni pool: katalüsaatori ees
• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Nimetus: CE 09SKV915
• Tootja: ESEN SKV

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Tootja: DLP

Nimetus: PRZEPYWOMIERZ POWIETRZA AUDI A1, A3, A4, A5, A5, Q2, TT/ CUPRA FORMENTOR 12-

Tootja: MEAT&DORIA

• kombineeritud PR-numbrile: TD3+4BF, TD3+7CS
• Installatsiooni pool: enne tahmafiltrit
• Pistiku värv: must
• OE-numbri jaoks: 06K919529J
• Tootja: METZGER

• vajaminev tükihulk: 1
• Sõidukitüüp: Kodiaq
• Mounting Type: Pipe-neck
• Suction pipe connector diameter [mm]: 69
• Number of pins: 4
• Supplementary Article/Supplementary Info: without gasket/seal
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• vajaminev tükihulk: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring