Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- PR-numbri jaoks: 1KK
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
-
Kõrgus (mm): 40,
3 - Pidurikettajämedus [mm]: 9
- Välisläbimõõt [mm]: 230
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
-
Lisainfo: 40H9010-
JPN
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 40
- Outer Diameter [mm]: 232
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 9
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Lisainfo: 1036068
-
PR-numbri jaoks: 1LB,
1LM - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 37
- Outer Diameter [mm]: 256
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Lisainfo: 1031854
-
PR-numbri jaoks: 1LN,
1LP, 1ZD - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
-
PR-numbri jaoks: 1KK,
1KP, 9U0, 9U1 - Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 232
- Hub Diameter [mm]: 135.5
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 9
- Height [mm]: 40
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Replace in pairs only:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Centering Diameter [mm]: 65
- Height [mm]: 39
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
0749
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- Kogus pakendis: 2
- Centering Diameter [mm]: 65
- Height [mm]: 40
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Outer Diameter [mm]: 230
- Number of Holes: 5
- Tootja: LPR
- Nimetus: LPR A1441P
- Installatsiooni pool: Tagasild
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height [mm]: 39
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Minimum thickness [mm]: 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
Lisainfo: 19-
0749MAX
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0250/ 1192 - Surface: Coated
- Outer Diameter [mm]: 232
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 39.5
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3034C
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 39.5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Outer Diameter [mm]: 232
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 35
- Outer Diameter [mm]: 239
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 18
- Tootja: KAMOKA
- Kogus pakendis: 2
- Ehitusaasta alates: 08.2000
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Outer Diameter [mm]: 232
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Height [mm]: 39.4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Type: solid
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.8
- Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Diameter [mm]: 232
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Number of Holes: 5
- Surface: Painted
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 232
- General Information: brake disc; rear
- Tootja: VIKA
-
PR-numbri jaoks: 1LQ,
1LR - Installatsiooni pool: Esisild
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Rim Hole Number: 5
- Outer Diameter [mm]: 256
- Bolt Hole Circle Ø [mm]: 100
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LB,
1LM - Minimum thickness [mm]: 16
- Brake Disc Type: Vented
- Bore Diameter [mm]: 15.6
- Brake Disc Thickness [mm]: 18
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Inner Diameter [mm]: 125
- Height [mm]: 35
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 239
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 39
- Number of Holes: 5
- Thread Size: 16
- Bolt Hole Circle Ø [mm]: 100
- Colour: black
- Surface: Painted
-
Test Mark: E190R-
02 C0190/ 0628 - Nimetus: PIDURIKETAS
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 65
- Height [mm]: 35
- Number of Holes: 5
- Fitting Position: Front Axle
- Minimum thickness [mm]: 16
- Outer Diameter [mm]: 239
- Bolt Hole Circle Ø [mm]: 108
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LB,
1LM - Kogus pakendis: 2
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 65
- Height [mm]: 34.1
- Brake Disc Thickness [mm]: 18
- Number of Holes: 5
- Brake System: ATE
- Outer Diameter [mm]: 239
- Brake Disc Type: internally vented
- Tootja: LPR
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Height [mm]: 39.5
- Minimum thickness [mm]: 7
- Surface: Coated
- Inner Diameter [mm]: 124.2
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.8
- Weight [kg]: 2.7
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355105411
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
PR-numbri jaoks: 1LQ,
1LR - Brake Disc Type: Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 37
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Kogus pakendis: 2
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Height [mm]: 39.5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Outer Diameter [mm]: 232
- Number of Holes: 1
- Centering Diameter [mm]: 65
- Tootja: DRIVE
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Outer Diameter [mm]: 230
- Height [mm]: 39
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Weight [kg]: 5.55
- Minimum thickness [mm]: 7
- Tootja: TOMEX BRAKES
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 40
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 230
- Surface: Coated
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.7165.11
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Height [mm]: 39.5
- Minimum thickness [mm]: 7
- Surface: Coated
- Inner Diameter [mm]: 124.2
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.8
- Packaging length [cm]: 24.8
- Packaging width [cm]: 24.8
- Packaging height [cm]: 10.5
- Weight [kg]: 2.7
- Nimetus: PIDURIKETAS
- Tootja: TEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
- kombineeritud PR-numbrile: 1LB+1LM
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 35
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Outer Diameter [mm]: 239
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Minimum thickness [mm]: 19
- Brake Disc Type: Vented
- Bore Diameter [mm]: 15.6
- Brake Disc Thickness [mm]: 22
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Inner Diameter [mm]: 133.5
- Height [mm]: 36.7
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
-
PR-numbri jaoks: 1LB,
1LM - Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Outer Diameter [mm]: 239
- Height [mm]: 35
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Weight [kg]: 7.65
- Minimum thickness [mm]: 16
- Tootja: TOMEX BRAKES
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Height [mm]: 36.8
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 256
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Tootja: LPR
- Nimetus: LPR A1461V
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LM
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0289/ 1954 - Surface: Oiled
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 65
- Height [mm]: 34.9
- Nimetus: DE BG3695
- Tootja: DELPHI
-
PR-numbri jaoks: 1LQ,
1LR - Brake Disc Type: Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 37
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Minimum thickness [mm]: 19
- Nimetus: PIDURIKETAS
- Tootja: MAX
-
PR-numbri jaoks: 1LR,
1LQ - Installatsiooni pool: Esisild
- Piduriketta liik: sisemine õhutus
-
Kõrgus (mm): 36,
5 - Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 256
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Tootja: JPN
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- PR-numbri jaoks: 1KK
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Brake Disc Type: solid
- Minimum thickness [mm]: 7
- Height [mm]: 39.5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Lisainfo: QD5279
- Installatsiooni pool: Tagasild
-
Brake Disc Type: solid,
slotted/ perforated - Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height [mm]: 39
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Minimum thickness [mm]: 7
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Height [mm]: 41
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 7
- Weight [kg]: 2.62
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- PR-numbri jaoks: 1KK
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Brake Disc Type: solid
- Minimum thickness [mm]: 7
- Height [mm]: 39.5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Diameter [mm]: 238.7
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Number of Holes: 5
- Height [mm]: 34.9
-
Machining: High-
carbon - Surface: Painted
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 239
- General Information: brake disc; front
- Tootja: VIKA
-
PR-numbri jaoks: 1LQ,
1LR - Plokieraldus:
- Brake Disc Thickness [mm]: 22
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 36.7
- Outer Diameter [mm]: 256
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Weight [kg]: 5.07
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
PR-numbri jaoks: 1LQ,
1LR - Plokieraldus:
- Brake Disc Thickness [mm]: 22
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 37
- Outer Diameter [mm]: 256
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Weight [kg]: 5.07
- Observe service information:
- Tootja: BLUE PRINT
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- PR-numbri jaoks: 1LQ
- Outer Diameter [mm]: 256
- Height [mm]: 36.5
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Number of Holes: 5
- Surface: Painted
- Fitting Position: Front Axle
- Tightening Torque [Nm]: 120
-
Tootja: ASHIKA-
TARCZE - Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - tootekoodile: LP1514
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0300/ 1357 - Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 21.9
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Height [mm]: 36.6
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3208C
- PR-numbri jaoks: 1LQ
- Outer Diameter [mm]: 256
- Height [mm]: 36.5
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Number of Holes: 5
- Surface: Painted
- Fitting Position: Front Axle
- Tightening Torque [Nm]: 120
- Tootja: JAPKO
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Kogus pakendis: 2
- Height [mm]: 37
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Number of bores: 1
- Outer Diameter [mm]: 256
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Tootja: SKF
- Nimetus: SK VKBD80003V2
- PR-numbri jaoks: 1ZF
- Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 36.7
- Minimum thickness [mm]: 19
- Rim Hole Number: 5
- Number of mounting bores: 1
- Supplementary Article/Info 2: with screw
- No. of holes 1: 1
-
Test Mark: ECE-
R90 - Weight [kg]: 5.39
- Tootja: VALEO
-
PR-numbri jaoks: 1LQ,
1LR - Plokieraldus:
- Brake Disc Thickness [mm]: 22
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 36.7
- Outer Diameter [mm]: 256
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Weight [kg]: 5.07
- Nimetus: SW 32 91 4404
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Brake Disc Thickness [mm]: 22
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Brake Disc Type: Vented
- Thread Size: 16
- Height [mm]: 37
-
Tootja: AUTO-
GH
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
- Minimum thickness [mm]: 19
- Height [mm]: 36.8
- Outer Diameter [mm]: 256
- Brake Disc Type: internally vented
- Centering Diameter [mm]: 65
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Brake System: ATE
- Number of Holes: 5
-
Installation Information: No degreasing,
ready- to- fit solution. - Tootja: LPR
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Kõrgus (mm): 39
- Pidurikettajämedus [mm]: 9
- Keermemõõt: 16
- Miinimumjämedus (mm): 7
- Välisläbimõõt [mm]: 230
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
- Tootja: PROFIPOWER
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Width [mm]: 22
- Number of Holes: 5
- Height [mm]: 36.7
-
Machining: High-
carbon - Surface: Painted
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 256
- General Information: brake disc; front; 256*22MM
- Tootja: VIKA
- kombineeritud PR-numbrile: 1LQ+1LR
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 37
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 256
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
-
PR-numbri jaoks: 1LQ,
1LR - Fitting Position: Front Axle
- Outer Diameter [mm]: 256
- Height [mm]: 36.7
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Wheel Bolt Bore Diameter [mm]: 15.6
- Number of Holes: 5
- Brake Disc Type: Vented
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
-
PR-numbri jaoks: 1LN,
1LP - Installatsiooni pool: Esisild
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- Bolt Hole Circle Ø [mm]: 100
- Tootja: DELLO AUTOMEGA
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LM,
1ZN - Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Brake Disc Type: Externally Vented
- Minimum thickness [mm]: 16
- Height [mm]: 34.9
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- Kogus pakendis: 2
-
Brake Disc Type: solid,
slotted - Brake Disc Thickness [mm]: 9
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 40
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 230
- Surface: Coated
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.7165.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- PR-numbri jaoks: 1KM
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
-
Kõrgus (mm): 48,
3 - Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 300
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Tootja: JPN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Minimum thickness [mm]: 22
- Brake Disc Type: Vented
- Bore Diameter [mm]: 15.6
- Brake Disc Thickness [mm]: 25
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Inner Diameter [mm]: 136
- Height [mm]: 34.5
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 256
-
Kaal (kg): 4,
921 -
Kõrgus (mm): 36,
8 - Aukude arv: 5
- Ava Ø (mm): 100
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 19
- Ava läbimõõt kuni [mm]: 16
- Nimetus: ALT 127930FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LB,
1LM - Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Height [mm]: 34.9
- Minimum thickness [mm]: 16
- Surface: Coated
- Inner Diameter [mm]: 124.7
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.7
- Weight [kg]: 3.6
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355107651
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Ehitusaasta alates: 08.2000
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Outer Diameter [mm]: 255.7
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Height [mm]: 36.7
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Type: Vented
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.7
- Nimetus: PIDURIKETAS
- Tootja: BOS
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- kombineeritud PR-numbrile: 1LQ+1LR
- Kogus pakendis: 2
-
Kontrolltähistus: ECE-
R90 - Kõrgus (mm): 37
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 256
- Aukude arv: 5
- Ava Ø (mm): 65
- Pealispind: värvitud
- Tootja: CIFAM
-
PR-numbri jaoks: 1LQ,
1LR - Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 256
- Height [mm]: 37
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Weight [kg]: 10.15
- Minimum thickness [mm]: 19
- Tootja: TOMEX BRAKES
-
PR-numbri jaoks: 1LQ,
1LR - Kogus pakendis: 2
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Height [mm]: 36.7
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 256
- Number of Holes: 1
- Centering Diameter [mm]: 65
- Tootja: DRIVE
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Kogus pakendis: 2
- Brake Disc Type: Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Height [mm]: 37
- Number of Holes: 5
- Thread Size: 16
- Bolt Hole Circle Ø [mm]: 100
-
Machining: High-
carbon - Colour: black
- Surface: Painted
-
Test Mark: E1 90R-
02 C0185/ 2514 - Nimetus: PIDURIKETAS
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 34
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Kogus pakendis: 2
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Brake Disc Type: internally vented
- Centering Diameter [mm]: 65
- Brake System: TRW
- Minimum thickness [mm]: 22
- Height [mm]: 34.2
- Outer Diameter [mm]: 288
- Tootja: LPR
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LM,
1LB - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Height [mm]: 35
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 16
- Weight [kg]: 3.62
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Brake Disc Type: Externally Vented
- Minimum thickness [mm]: 19
- Height [mm]: 36.7
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Kogus pakendis: 2
- Brake Disc Type: internally vented
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34.2
- Surface: Coated
- Brake System: TRW
- Number of Holes: 5
- Outer Diameter [mm]: 288
- Minimum thickness [mm]: 22
-
Installation Information: No degreasing,
ready- to- fit solution. - Tootja: LPR
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 34
- Outer Diameter [mm]: 288
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- for OE number: 1J0615301
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36.7
- Minimum thickness [mm]: 19
- Surface: Coated
- Inner Diameter [mm]: 133.4
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.7
- Weight [kg]: 5.2
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355105361
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0300/ 1195 - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 34.2
- Nimetus: DE BG3035C
- Tootja: DELPHI
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Minimum thickness [mm]: 8
-
Brake Disc Type: Vented,
Perforated - Bore Diameter [mm]: 15.6
- Brake Disc Thickness [mm]: 22
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Inner Diameter [mm]: 133.5
- Height [mm]: 36.7
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
- Tootja: DENCKERMANN HAMULCE
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36.7
- Minimum thickness [mm]: 19
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 133.4
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.7
- Weight [kg]: 5.2
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355127291
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LM,
1ZN - Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 35
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 239
- Surface: Coated
- Minimum thickness [mm]: 16
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.8483.11
- Kvaliteediklass: Q
-
PR-numbri jaoks: 1LQ,
1LR -
Brake Disc Type: Vented,
slotted/ perforated - Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Centering Diameter [mm]: 65
- Height [mm]: 37
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Surface: Painted
- Minimum thickness [mm]: 19
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Brake Disc Type: Externally Vented
- Minimum thickness [mm]: 19
- Height [mm]: 36.7
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
-
PR-numbri jaoks: 1LB,
1LM - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Height [mm]: 35
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 125
- Bolt Hole Circle Ø [mm]: 100
- Bore Diameter [mm]: 15.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0118/ 0081 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LB,
1LM - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Height [mm]: 34.9
- Minimum thickness [mm]: 16
- Surface: Coated
- Inner Diameter [mm]: 124.7
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.7
- Packaging length [cm]: 24.8
- Packaging width [cm]: 24.8
- Packaging height [cm]: 10.5
- Weight [kg]: 3.6
- Nimetus: PIDURIKETAS
- Tootja: TEX
- Kvaliteediklass: Q
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
PR-numbri jaoks: 1LQ,
1LR - Fitting Position: Front Axle
- Outer Diameter [mm]: 256
- Height [mm]: 36.7
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Wheel Bolt Bore Diameter [mm]: 15.6
- Number of Holes: 5
- Brake Disc Type: Vented
- Surface: Zink flake coated
-
Machining: High-
carbon -
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- kombineeritud PR-numbrile: 1LN+1LP
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 34.3
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 288
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
-
PR-numbri jaoks: 1LQ,
1LR - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 36.7
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133.5
- Bore Diameter [mm]: 15.6
-
Test Mark: E1 90R-
02C0118/ 0141 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 37
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.7011.11
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36.7
- Minimum thickness [mm]: 19
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 133.4
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
06 - Wheel Bolt Bore Diameter [mm]: 15.7
- Packaging length [cm]: 27.8
- Packaging width [cm]: 27.8
- Packaging height [cm]: 10.5
- Weight [kg]: 5.2
- Tootja: TEXTAR TARCZE HAMULCOWE
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Kogus pakendis: 2
- Height [mm]: 34.4
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Number of bores: 5
- Outer Diameter [mm]: 288
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Nimetus: SK VKBD80074V2
- Tootja: SKF
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP, 1ZD - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.16
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
-
Lisainfo: 100-
1235- 20
- Ehitusaasta alates: 08.2000
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LN
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Height [mm]: 34.2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Type: Vented
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Coated
-
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.7
- Tootja: BOSCH
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 19
- Weight [kg]: 5.2
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- Piduriseade: Tagasilla ketaspiduriga sõidukile
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 9
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 40
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 230
- Surface: Coated
- Minimum thickness [mm]: 7.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 08.7165.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
-
PR-numbri jaoks: 1LB,
1LM - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 239
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Height [mm]: 35
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 125
- Bolt Hole Circle Ø [mm]: 100
- Bore Diameter [mm]: 15.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Number of Holes: 5
- Height [mm]: 34.2
-
Machining: High-
carbon - Surface: Painted
- Wheel Hub Diameter [mm]: 65
- Outer Diameter [mm]: 288
- General Information: brake disc; front
- Tootja: VIKA
-
PR-numbri jaoks: 1LQ,
1LR - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 36.7
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133.5
- Bore Diameter [mm]: 15.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - paaris tootenumbrid: 571985J
- Kogus pakendis: 2
- Test Mark: R90 Homologated
- Height [mm]: 36.5
- Weight [kg]: 10.9
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Outer Diameter [mm]: 256
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Tightening Torque [Nm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Surface: Coated
- Packing Type: Box
- Quantity Unit: Set
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 9
- Tootja: JURID
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 256
- General Information: brake disc; front
- Tootja: BORSEHUNG
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP - Minimum thickness [mm]: 22
-
Brake Disc Type: Vented,
Perforated - Bore Diameter [mm]: 15.6
- Brake Disc Thickness [mm]: 25
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Inner Diameter [mm]: 136
- Height [mm]: 34.5
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
- Tootja: DENCKERMANN HAMULCE
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 37
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.7011.75
- Kvaliteediklass: Q
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP, 1ZD - Kogus pakendis: 2
- Brake Disc Type: Externally Vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.2
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR - Piduriketta liik: õhutusega
- Kõrgus (mm): 37
- Pidurikettajämedus [mm]: 22
- Keermemõõt: 16
- Miinimumjämedus (mm): 19
- Välisläbimõõt [mm]: 256
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 100
- Tootja: PROFIPOWER
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LN
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 34
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.7010.21
- Kvaliteediklass: Q
-
PR-numbri jaoks: 1LN,
1LP - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 34.5
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 136
- Bore Diameter [mm]: 15.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0118/ 0066 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Height [mm]: 41
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: KBA 60934
- Minimum thickness [mm]: 7
- Weight [kg]: 2.62
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LN
- Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 34
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.7010.76
- Kvaliteediklass: Q
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
-
PR-numbri jaoks: 1LN,
1LP - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Height [mm]: 34.5
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 136
- Bore Diameter [mm]: 15.6
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 22
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 37
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 256
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 19.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 09.7011.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KK
- Kogus pakendis: 2
-
Brake Disc Type: solid,
slotted - Surface: Coated
- Outer Diameter [mm]: 230
- Brake Disc Thickness [mm]: 9
- Height [mm]: 41
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 7
- Weight [kg]: 2.62
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LQ,
1LR, 1ZF - Kogus pakendis: 2
-
Brake Disc Type: Externally Vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 19
- Weight [kg]: 5.2
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LN
- Kogus pakendis: 2
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 34
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 288
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LN,
1LP, 1ZD - Kogus pakendis: 2
-
Brake Disc Type: Externally Vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.16
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog