• Mootorikood: BGU/BSE/BSF
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• Colour Coding: black
• Number of connectors: 1
• External Thread [mm]: M10x1
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Colour Coding: grey
• Number of pins: 2
• Lisainfo: Sender for water temperature gauge, 2 pins

• Lambda andur: Sond
• Mootorikood: BGU, BSE, BSF, CCSA
• Number of pins: 6
• Number of circuits: 5

• Pressure [bar]: 16
• Housing Colour: black
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Tootja: DELPHI
• Nimetus: DE SW90025
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Seerianumber: ECC-AU-005
• Keermemõõt: M10x1,0
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 1
• Pistiku värv: must
• Nimetus: NTY ECC-AU-005
• Tootja: NTY

• Mootorikood: BGU, BSF, BSE
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN
• Lisainfo: F18904

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 95510612500
• Tootja: KAMOKA

• Värvimarkeering: hall
• Seerianumber: ECT-VW-000
• Nimetus: NTY ECT-VW-000
• Tootja: NTY

• Mootorikood: BGU, BSF, BSE
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 30 91 8904
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: BGU, BSF, BSE
• Thread Size: M10x1,0
• Control Range [bar]: 1,2 - 1,6
• Weight [kg]: 0.033
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Tootja: NRF

• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Kokkupuutepind: tinutatud
• Asetuslaius (mm): 1,5
• Pistikkontaktide arv: 4
• Ridade arv: 2
• Tootja: DEPO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kaablipikkus (mm): 215
• Seerianumber: ECP-AU-009

• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Pistikkontaktide arv: 3
• Pistikute teostus: Female
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Lülitusulatus (bar): 0.55/0.85BAR
• Värv: pruun
• Üldine informatsioon: oil pressure switch
• Tootja: BORSEHUNG

• Mootorikood: BGU
• Värv: must
• Surve (bar) kuni: 1,6
• Surve alates (bar): 1,2
• Surve (bar): 1,4
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Nimetus: EP 1.800.135
• Tootja: EPS

• Mootorikood: BGU
• Värv: must
• Surve (bar) kuni: 1,6
• Surve alates (bar): 1,2
• Pressure [bar]: 1.4
• Thread Size: M10x1
• Spanner Size: 24
• Tootja: FACET

• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos klemmihoidjaga
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: BGU
• Värv: hall
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: EP 1.830.278
• Tootja: EPS
• Lisainfo: 1-830-278

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 1.4
• Tootja: FAE

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Pistikukatte kuju: ovaalne
• Tootja: ERA

• Mootorikood: BGU
• Värv: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Number of pins: 1
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA

• Mootorikood: BGU, CCSA, BSF, BSE
• Cable Length [mm]: 250
• Number of connectors: 3
• Housing Colour: grey
• Lisainfo: Sensor, crankshaft pulse

• Housing Colour: grey
• Number of pins: 2
• Spanner Size: 0
• Tootja: DELPHI
• Nimetus: DE TS10278

• OE-numbri jaoks: 06B 905 163 A
• Pikkus (mm): 51
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Seerianumber: ECP-AU-002

• Pistikkontaktide arv: 2
• Pistikute teostus: Lamepistik
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Versioon: 2
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: HE 6PT009309331
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistiku värv: must
• Seerianumber: ESS-VW-000

• Thread Size: M12 x 1,5
• Resistor [Ohm]: 2,500
• Spanner Size: 19
• Weight [kg]: 0.026
• Tootja: VEMO
• Lisainfo: V20-72-0459

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Korpusevärv: sinine, must
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Nimetus: SW 30 92 9318
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: BGU, BSE
• Värvimarkeering: hall
• Vastab originaalosa värvile: must
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Versioon: IAM
• soovitava lisavarustuse artiklinumber: 0899250, 0905513
• Võimsus [W]: 0,06
• Tootja: METZGER

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 215
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Värvimarkeering: hall
• Üldine informatsioon: coolant temperature sensor
• Tootja: BORSEHUNG

• Mootorikood: BGU, BSE, BSF
• Käigukasti liik: automaatkast 4 käiku
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 17SKV505
• Tootja: ESEN SKV

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: BGU
• Kerenumber (VIN) alates: 1Z-4-000 001
• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 030 905 377 C, YM21 12A699 BA
• Tootja: MEAT&DORIA

• Pinge [V]: 12
• Pikkus (mm): 220
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ESEN SKV

Tootja: MAGNETI MARELLI

• Thread Size: M12x1,5
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• Tootja: FAE

• Number of pins: 2
• Housing Colour: grey
• Tootja: FAE ELEKTRYKA

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 42.3
• for OE number: 06B 905 163 A
• for article number: 87380E
• Quality: OE EQUIVALENT
• Tootja: MEAT&DORIA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: BGU,BSE,BSF,CCSA
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.07
• Nimetus: VA 254019
• Tootja: VALEO

• Mootorikood: BGU, BSE, BSF
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: dark blue
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU009121421
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: BGU
• Korpusevärv: must
• Nimetus: EP 1.957.144
• Tootja: EPS

• Mootorikood: BGU, CCSA, BSF, BSE
• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: BGU, BSE, BSF, CCSA, CMXA
• Cable Length [mm]: 270
• Number of pins: 3
• Nimetus: DE SS10811
• Tootja: DELPHI

Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Mootorikood: BGU, BSE, BSF, CCSA, CMXA
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS10763-12B1

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10169

• Mootorikood: BGU
• Pikkus (mm): 215
• Nimetus: EP 1.953.241
• Tootja: EPS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114301
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: BGU, BSF, BSE
• Käigukasti liik: automaatkast 4 käiku
• Length [mm]: 59
• Supplementary Article/Info 2: for crankshaft, with seal ring, without cable
• Required quantity: 1
• Resistor [Ohm]: 850
• Colour: black
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 30.3
• Connector Shape: D Shape
• Weight [kg]: 0.018
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: BGU
• Length [mm]: 215
• Tootja: FACET

• Mootorikood: BGU, CCSA, BSF, BSE
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.48
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: BGU, BSE, BSF
• Tootja: BOSCH
• Nimetus: BS 0261231146

• Length [mm]: 50.9
• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 900
• Tolerance [%]: 10
• Cable Length [mm]: 215
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU009163181
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: BGU, BSE, BSF
• Tootja: BOSCH WYCOFANE

• Mootorikood: BGU, CCSA, BSF, BSE
• Length [mm]: 250
• Number of connectors: 3
• Weight [kg]: 0.06
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Tootja: KAMOKA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Tootja: VALEO

• Mootorikood: BGU
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Socket colour: white
• Tootja: FAE

• Kaal (kg): 0,06
• Ühenduste arv: 3
• Pikkus (mm): 250
• vajaminev tükihulk: 1
• Üldine informatsioon: crankshaft pulse sensor
• Tootja: BORSEHUNG

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Tootja: ASHIKA
• Lisainfo: 43-U04

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Tootja: JAPKO

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ENERGY