Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- PR-numbri jaoks: 1KD
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 255
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- PR-numbri jaoks: 1KF
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 260
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48
- Outer Diameter [mm]: 272
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 10
- Tootja: KAMOKA
- Kogus pakendis: 2
- Lisainfo: 103171
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49
- Outer Diameter [mm]: 256
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Lisainfo: 1032552
-
PR-numbri jaoks: 1ZC,
1ZF, 1ZM - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49
- Outer Diameter [mm]: 280
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Lisainfo: 1032446
-
PR-numbri jaoks: 1LL,
1LP - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- PR-numbri jaoks: 1KD
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 255
- Hub Diameter [mm]: 150
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51.6
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Surface: Coated
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- PR-numbri jaoks: 1KS
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KD
- Piduriketta liik: täis
-
Kõrgus (mm): 51,
3 - Pidurikettajämedus [mm]: 10
- Välisläbimõõt [mm]: 253
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Tootja: JPN
- PR-numbri jaoks: 1KS
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
-
Kõrgus (mm): 48,
2 - Pidurikettajämedus [mm]: 10
- Välisläbimõõt [mm]: 272
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Tootja: JPN
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Ehitusaasta kuni: 01.2013
- Miinimumjämedus (mm): 8
- Piduriketta liik: täis
-
Ava läbimõõt [mm]: 15,
3 -
Pidurikettajämedus [mm]: 9,
7 - Ava Ø (mm): 112
- Aukude arv: 9
-
Siseläbimõõt [mm]: 174,
5 -
Kõrgus (mm): 48,
2 - Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 272
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- PR-numbri jaoks: 1KP
- Ehitusaasta kuni: 01.2013
- Installatsiooni pool: Tagasild
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 286
- Bolt Hole Circle Ø [mm]: 112
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Ehitusaasta kuni: 01.2013
- Miinimumjämedus (mm): 10
- Piduriketta liik: täis
-
Ava läbimõõt [mm]: 15,
3 - Pidurikettajämedus [mm]: 12
- Ava Ø (mm): 112
- Aukudearv 2: 9
- Aukude arv: 5
- Siseläbimõõt [mm]: 159
-
Kõrgus (mm): 48,
6 - Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 282
- Tootja: DENCKERMANN ZAWIESZENIE
- Kogus pakendis: 2
- PR-numbri jaoks: 1KD
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 51.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 253
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- PR-numbri jaoks: 1KP
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0250/ 1775 - Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48.1
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG5020C
- Kvaliteediklass: PJ
- Ehitusaasta alates: 11.2009
- PR-numbri jaoks: 1KT
- Välisläbimõõt [mm]: 272
- Kõrgus (mm): 48
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 9
- Aukude arv: 9
- Pealispind: värvitud
- Installatsiooni pool: Tagasild
- Väändejõud [Nm]: 120
- Tootja: JAPKO
- PR-numbri jaoks: 1KP
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48.3
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
- Lisainfo: 108194 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Ehitusaasta kuni: 06.2009
- PR-numbri jaoks: 1KP
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Veljeaukude hulk: 5
-
Kõrgus (mm): 48,
5 - Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 286
- Ava Ø (mm): 112
- Keskaugu läbimõõt (mm): 150
- Rummus oleva ava läbimõõt [mm]: 65
- Tootja: JPN
-
PR-numbri jaoks: 1KS,
1KT - Plokieraldus:
- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 272
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 4.11
- for OE number: 5Q0 615 601 D
- Observe service information:
- Tootja: BLUEPRINT
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
PR-numbri jaoks: 1KS,
1KT - Plokieraldus:
- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 272
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 4.11
- for OE number: 5Q0 615 601 D
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
-
Pidurikettajämedus [mm]: 8,
7 - Välisläbimõõt [mm]: 255
-
Kaal (kg): 3,
544 -
Kõrgus (mm): 51,
3 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 7
-
Ava läbimõõt kuni [mm]: 15,
5 - Nimetus: ALT 127935FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.5
- Rim Hole Number: 5
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 150
- Weight [kg]: 4.87
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
- PR-numbri jaoks: 1KP
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48.3
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Nimetus: SW 33 10 2465
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- PR-numbri jaoks: 1KP
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49
- Outer Diameter [mm]: 282
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- PR-numbri jaoks: 1KP
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Weight [kg]: 4.76
- Observe service information:
- Tootja: BLUEPRINT
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Number of Holes: 5
- Outer Diameter [mm]: 282
- Centering Diameter [mm]: 65
- Height [mm]: 48.2
- Minimum thickness [mm]: 10
- Brake Disc Thickness [mm]: 12
- Brake Disc Type: solid
- Tootja: LPR
- Nimetus: LPR A1005P
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KF
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 49.8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 260
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Tagasild
- kombineeritud PR-numbrile: 1KS+1KT
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 48.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 272
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
- Height [mm]: 48.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Number of bores: 1
- Outer Diameter [mm]: 272
- Number of Holes: 9
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Tootja: SKF
- Nimetus: SK VKBD90041S2
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 256
-
Kaal (kg): 4,
042 -
Kõrgus (mm): 48,
6 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 10
-
Ava läbimõõt kuni [mm]: 15,
4 - Nimetus: ALT 127957FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Läbimõõt [mm]: 253
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Aukude arv: 9
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 253
- Üldine informatsioon: brake disc; rear; 253*10MM
- Tootja: VIKA
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0250/ 1401 - Surface: Coated
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 48.3
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4324C
-
PR-numbri jaoks: 1KS,
1KT - Plokieraldus:
- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 272
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 4.11
- for OE number: 5Q0 615 601 D
- Nimetus: SW 30 93 6128
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- PR-numbri jaoks: 1KF
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Hub Diameter [mm]: 150
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.4
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Surface: Coated
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KD
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.54
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Ehitusaasta kuni: 01.2013
- Installatsiooni pool: Esisild
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 2
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 282
- Hub Diameter [mm]: 159
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only:
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Mootorikood: CCZA
- Ehitusaasta alates: 11.2008
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KT
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Surface: Coated
-
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.3
- Tootja: BOSCH
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Välisläbimõõt [mm]: 272
-
Kaal (kg): 3,
924 -
Kõrgus (mm): 48,
3 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 8
-
Ava läbimõõt kuni [mm]: 15,
35 - Nimetus: ALT 127954FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 282
-
Kaal (kg): 4,
688 -
Kõrgus (mm): 48,
3 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 10
-
Ava läbimõõt kuni [mm]: 15,
5 - Nimetus: ALT 127952FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Number of Holes: 9
- Rim Hole Number: 5
-
Thread Size: 15,
3 - Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Colour: black
- Surface: Painted
-
Test Mark: E190R-
02C0190/ 0261 - Tootja: TRW
- Kvaliteediklass: Q
- Nimetus: Brake discs
SVHC: No information available, please contact the manufacturer!
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 282
-
Kõrgus (mm): 48,
2 - Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Pealispind: värvitud
-
Kaal (kg): 9,
8 - Miinimumjämedus (mm): 10
- Tootja: TOMEX BRAKES
- PR-numbri jaoks: 1KP
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 48.2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Height [mm]: 48.3
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Number of bores: 1
- Outer Diameter [mm]: 282
- Number of Holes: 9
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Tootja: SKF
- Nimetus: SK VKBD90014S2
- PR-numbri jaoks: 1KF
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 257
- Height [mm]: 48.6
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Tootja: MEYLE
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48.3
- Minimum thickness [mm]: 8
- Surface: Coated
- Inner Diameter [mm]: 149
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 3.9
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355116971
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Height [mm]: 48.3
- Minimum thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 4
- Supplementary Article/Info 2: with screw
- No. of holes 1: 1
-
Test Mark: ECE-
R90 - Weight [kg]: 10.07
- Tootja: VALEO
- PR-numbri jaoks: 1ZE
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 282
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 10
- Thread Size: 15.3
- Number of Holes: 9
- Colour: black
- Surface: Painted
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02 C0190/ 0525 - Tootja: TRW
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KF
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Height [mm]: 48.4
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140.1
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 4.1
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355109641
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Läbimõõt [mm]: 270
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Laius (mm): 10
- Aukude arv: 9
-
Kõrgus (mm): 48,
3 - Pealispind: värvitud
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 272
- Üldine informatsioon: brake disc; 272*10MM
- Tootja: VIKA
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Brake Disc Type: solid
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.3
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 4.7
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355112141
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KF
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 22
- Välisläbimõõt [mm]: 280
-
Kaal (kg): 5,
774 -
Kõrgus (mm): 49,
7 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 19
-
Ava läbimõõt kuni [mm]: 15,
5 - Nimetus: ALT 127939FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Height [mm]: 48.3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Surface: Oiled
-
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.3
- Tootja: BOSCH UK£ADY HAMULCOWE
-
PR-numbri jaoks: 1ZF,
1ZM - Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer Diameter [mm]: 280
- Hub Diameter [mm]: 154
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49.5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Replace in pairs only:
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- PR-numbri jaoks: 1ZF
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 49.9
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 280
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Läbimõõt [mm]: 256
- Pidurikettajämedus [mm]: 12
- Miinimumjämedus (mm): 9
- Aukude arv: 9
- Piirangutega toode/piirangu info 2: koos kruvidega
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 260
- Üldine informatsioon: brake disc; rear; 260*12MM
- Tootja: VIKA
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.B413.11
- Kvaliteediklass: Q
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Plokieraldus:
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 49.7
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 8.6
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
- Lisainfo: 24384 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KS
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.9
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Läbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 22
- Miinimumjämedus (mm): 19
- Aukude arv: 9
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 280
- Üldine informatsioon: brake disc; front; 280*22MM
- Tootja: VIKA
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.A202.11
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KF
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 11.9
- Height [mm]: 48.4
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140.1
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 27.8
- Packaging width [cm]: 27.8
- Packaging height [cm]: 12.2
- Weight [kg]: 4.1
- Tootja: TEXTAR TARCZE HAMULCOWE
- Kvaliteediklass: Q
- Nimetus: Brake discs
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Plokieraldus:
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 49.7
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 8.6
- Nimetus: SW 30 92 4384
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KD
- Piduriketta liik: täis
- Kõrgus (mm): 51
- Pidurikettajämedus [mm]: 10
-
Keermemõõt: 15,
3 - Miinimumjämedus (mm): 8
- Välisläbimõõt [mm]: 253
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Tootja: PROFIPOWER
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LP
- Kogus pakendis: 2
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.6
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tootja: LPR
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48.3
- Minimum thickness [mm]: 8
- Surface: Coated
- Inner Diameter [mm]: 149
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 3.9
- Tootja: TEXTAR TARCZE HAMULCOWE
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul - Pidurikettajämedus [mm]: 25
- Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Välisläbimõõt [mm]: 312
- Piduriketta liik: õhutusega
-
Keermemõõt: 15,
4 -
Kõrgus (mm): 49,
9 -
Tootja: AUTO-
GH
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Plokieraldus:
- Brake Disc Thickness [mm]: 25
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 50
- Outer Diameter [mm]: 312
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 8.6
- Observe service information:
- Tootja: BLUEPRINT
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Outer Diameter [mm]: 272
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Surface: Coated
- Brake System: BOSCH
-
Hole Arrangement/Number: 5/
10 - Tootja: OPTIMAL ZAWIESZENIE
- PR-numbri jaoks: 1LP
- Installatsiooni pool: Esisild
- Piduriketta liik: sisemine õhutus
-
Kõrgus (mm): 49,
5 - Pidurikettajämedus [mm]: 25
- Välisläbimõõt [mm]: 312
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Tootja: JPN
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Välisläbimõõt [mm]: 286
- Üldine informatsioon: brake disc; rear; 286*12MM
- Tootja: VIKA
- PR-numbri jaoks: 1LP
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 50
- Outer Diameter [mm]: 312
- Centering Diameter [mm]: 65
- Brake Disc Thickness [mm]: 25
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Kogus pakendis: 2
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Piduriketta liik: täis
-
Kõrgus (mm): 48,
3 - Pidurikettajämedus [mm]: 10
-
Keermemõõt: 15,
3 - Miinimumjämedus (mm): 8
- Välisläbimõõt [mm]: 272
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Tootja: PROFIPOWER
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Brake Disc Type: solid
- Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48.3
- Minimum thickness [mm]: 10
- Surface: Coated
- Inner Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 4.7
- Tootja: TEXTAR TARCZE HAMULCOWE
- Lisainfo: 92140803
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- PR-numbri jaoks: 1KP
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 286
- Height [mm]: 48.5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15.3
- Number of Holes: 5
- Brake Disc Type: solid
- Surface: Zink flake coated
-
Supplementary Article/Info 2: with bolts/
screws - Required quantity: 2
- Tootja: MEYLE
General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LP
- Kogus pakendis: 2
- Surface: Coated
- Height [mm]: 49.6
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Outer Diameter [mm]: 312
- Minimum thickness [mm]: 22
- Brake Disc Thickness [mm]: 25
- Brake Disc Type: internally vented
-
Installation Information: No degreasing,
ready- to- fit solution. - Tootja: LPR
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LP,
1LL - Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
-
Lisainfo: 100-
3300- 20
- Ehitusaasta alates: 11.2009
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KT
- paaris tootenumbrid: 573312J
- Kogus pakendis: 2
- Kontrolltähistus: R90 Homologated
- Kõrgus (mm): 48
-
Kaal (kg): 6,
2 - Piduriketta liik: täis
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 9
- Puurpilt/auguarv: 5+4+1
- Välisläbimõõt [mm]: 272
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Väändejõud [Nm]: 120
- Pealispind: kaetud
- Pidurisüsteem: BOSCH
- Konteineri tüüp: Sahtel
- Hulgaühik: Komplekt
- Piirangutega toode/piirangu info 2: koos kruvidega
- Versioon: JC
-
pakendi pikkus [cm]: 30,
5 -
pakendi laius [cm]: 30,
5 -
pakendi kõrgus [cm]: 11,
5 - Tootja: JURID
- Ehitusaasta kuni: 01.2013
-
PR-numbri jaoks: 1KS,
1KT - Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 9.7
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
-
Supplementary Article/Info 2: with bolts/
screws - Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Bore Diameter [mm]: 15.3
- MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0523 - Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZF,
1ZM, 1ZC - Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 19
- Weight [kg]: 5.92
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Ehitusaasta kuni: 01.2013
- PR-numbri jaoks: 1KP
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 159
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0535 - Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Brake Disc Type: Vented
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0277/ 1198 - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 24.9
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49.6
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG3953C
- Lisainfo: BG3953C DELPHI
-
PR-numbri jaoks: 1LL,
1ZB - Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Välisläbimõõt [mm]: 312
-
Kõrgus (mm): 49,
9 - Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Pealispind: värvitud
-
Kaal (kg): 17,
7 - Miinimumjämedus (mm): 22
- Tootja: TOMEX BRAKES
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Läbimõõt [mm]: 288
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 22
- Laius (mm): 25
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Töötlus: hochgekohlt
- Pealispind: värvitud
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 288
- Üldine informatsioon: brake disc; front; 288*25MM
- Tootja: VIKA
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB - Height [mm]: 49.5
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Number of bores: 5
- Outer Diameter [mm]: 312
- Number of Holes: 5
- Centering Diameter [mm]: 65
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Nimetus: SK VKBD80006V1
- Tootja: SKF
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
-
Pidurikettajämedus [mm]: 25,
2 - Välisläbimõõt [mm]: 312
-
Kaal (kg): 8,
506 -
Kõrgus (mm): 49,
8 - Aukude arv: 9
- Ava Ø (mm): 112
- Tsentri läbimõõt (mm): 65
- Pealispind: kaetud
- Miinimumjämedus (mm): 22
-
Ava läbimõõt kuni [mm]: 15,
5 - Nimetus: ALT 127945FCAL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1LP
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 49.6
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 65
- Surface: Painted
- Tootja: METELLI UKL.HAMULCOWY
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Läbimõõt [mm]: 312
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 22
- Laius (mm): 25
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Töötlus: hochgekohlt
- Pealispind: värvitud
- Ratta keskauguläbimõõt (mm): 65
- Välisläbimõõt [mm]: 312
- Üldine informatsioon: brake disc; front; 312*25MM
- Tootja: VIKA
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Piduriketta liik: täis
-
Kõrgus (mm): 48,
2 - Pidurikettajämedus [mm]: 12
- Keermemõõt: 15.3
- Miinimumjämedus (mm): 10
- Välisläbimõõt [mm]: 282
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Tootja: PROFIPOWER
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Brake Disc Type: internally vented
-
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 7.3
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355128001
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
PR-numbri jaoks: 1LL,
1ZB - Fitting Position: Front Axle
- Brake Disc Type: Vented
- Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
- Rim Hole Number: 9
- Weight [kg]: 8.85
- Tootja: VALEO TARCZE
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 24.9
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 30.8
- Packaging width [cm]: 30.8
- Packaging height [cm]: 12.7
- Weight [kg]: 7.3
- Tootja: TEXTAR TARCZE HAMULCOWE
- Lisainfo: 92120805
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
-
Brake Disc Type: solid,
slotted - Brake Disc Thickness [mm]: 10
- Number of Holes: 9
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48.3
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8
- Nimetus: BR 08.B413.75
- Tootja: BREMBO
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Kõrgus (mm): 50
- Välisläbimõõt [mm]: 312
- Tootja: FAST
- Ehitusaasta kuni: 01.2013
-
PR-numbri jaoks: 1KS,
1KT - Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 9.7
- Minimum thickness [mm]: 8
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Outer Diameter [mm]: 280
- General Information: brake disc; front
- Tootja: BORSEHUNG
- Ehitusaasta kuni: 01.2013
- PR-numbri jaoks: 1KP
- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48.6
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 159
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
-
Brake Disc Type: solid,
slotted - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48.2
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.A202.75
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LP,
1LL - Brake Disc Type: Vented
- Outer Diameter [mm]: 312
- Height [mm]: 49.9
- Number of Holes: 9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 22
-
Thread Size: 15,
4 - Bolt Hole Circle Ø [mm]: 112
- Colour: black
- Surface: Painted
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E190R-
02 C0176/ 0613 - Tootja: TRW
- Kogus pakendis: 2
SVHC: No information available, please contact the manufacturer!
- Installatsiooni pool: Tagasild
- Ehitusaasta alates: 11.2008
- Mootorikood: CCZA
- PR-numbri jaoks: 1KT
- Kogus pakendis: 2
- Piduriketta liik: täis
- Aukude arv: 9
- Piirangutega toode/piirangu info 2: koos kruvidega
- Välisläbimõõt [mm]: 272
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 65
- Kõrgus (mm): 48
- Ava Ø (mm): 112
-
Ava läbimõõt kuni [mm]: 15,
3 - Kvaliteediklass: PJ
- Nimetus: Brake discs
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB, 1LP - Kogus pakendis: 2
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 09.9772.11
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
-
PR-numbri jaoks: 1KS,
1KT - Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 10
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 272
- Surface: Coated
- Minimum thickness [mm]: 8.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 08.B413.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB - Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Weight [kg]: 8.6
- Assy./disassy. by qualified personnel required!:
- Nimetus: HE 8DD355127971
- Tootja: HELLA PAGID
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Brake Disc Thickness [mm]: 12
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 48
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 282
- Surface: Coated
- Minimum thickness [mm]: 10.5
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 08.A202.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- PR-numbri jaoks: 1ZF
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
-
Kõrgus (mm): 49,
5 - Pidurikettajämedus [mm]: 22
-
Keermemõõt: 15,
5 - Miinimumjämedus (mm): 19
- Välisläbimõõt [mm]: 280
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Tootja: PROFIPOWER
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KD
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 253
- Brake Disc Thickness [mm]: 10
- Height [mm]: 51
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.5
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB - Kogus pakendis: 2
- Brake Disc Type: internally vented
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49.7
- Minimum thickness [mm]: 22
-
Machining: High-
carbon - Surface: Coated
- Inner Diameter [mm]: 144
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
-
Hole Arrangement/Number: 05/
10 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 32.8
- Packaging width [cm]: 32.8
- Packaging height [cm]: 12.5
- Weight [kg]: 8.6
- Tootja: TEXTAR TARCZE HAMULCOWE
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs
-
PR-numbri jaoks: 1LL,
1LP - Kogus pakendis: 2
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- Height [mm]: 49.7
-
Machining: High-
carbon - Centering Diameter [mm]: 65
- Surface: Coated
- Minimum thickness [mm]: 22
-
Hole Arrangement/Number: 5/
10 - Tootja: OPTIMAL ZAWIESZENIE
- Ehitusaasta kuni: 01.2013
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Bore Diameter [mm]: 15.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 1001 - Tootja: ATE
- Kvaliteediklass: Q
- Nimetus: Brake discs
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KF
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 256
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4
-
Hole Arrangement/Number: 6/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- PR-numbri jaoks: 1LP
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
-
Kõrgus (mm): 49,
9 - Pidurikettajämedus [mm]: 25
-
Keermemõõt: 15,
4 - Miinimumjämedus (mm): 22
- Välisläbimõõt [mm]: 312
- Aukude arv: 9
- Tsentri läbimõõt (mm): 65
- Ava Ø (mm): 112
- Tootja: PROFIPOWER
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - paaris tootenumbrid: 573128J
- Kontrolltähistus: R90 Homologated
- Kõrgus (mm): 50
-
Kaal (kg): 8,
94 - Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 25
- Miinimumjämedus (mm): 23
- Välisläbimõõt [mm]: 312
- Aukude arv: 5
- Tsentri läbimõõt (mm): 65
- Väändejõud [Nm]: 120
- Ava Ø (mm): 112
- Pealispind: kaetud
- Pidurisüsteem: ATE
- Konteineri tüüp: Sahtel
- Hulgaühik: Tükk
- Piirangutega toode/piirangu info 2: koos kruvidega
- Versioon: JC
- pakendi pikkus [cm]: 33
- pakendi laius [cm]: 33
-
pakendi kõrgus [cm]: 6,
7 - Tootja: JURID
- Ehitusaasta kuni: 01.2013
-
PR-numbri jaoks: 1LL,
1LP, 1ZB - Installatsiooni pool: Esisild
-
Supplementary Article/Info 2: with bolts/
screws - Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 49.9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 146
- Bore Diameter [mm]: 15.3
-
Test Mark: E1 90R-
02C0858/ 1214 - MAPP code available:
- Tootja: ATE
- Kogus pakendis: 2
- Kvaliteediklass: Q
- Nimetus: Brake discs
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB, 1LP -
Brake Disc Type: internally vented,
slotted - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Kogus pakendis: 2
- Kvaliteediklass: Q
- Nimetus: Brake discs
Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Outer Diameter [mm]: 312
- General Information: brake disc; front
- Tootja: BORSEHUNG
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KP
- Kogus pakendis: 2
-
Brake Disc Type: solid,
slotted - Surface: Coated
- Outer Diameter [mm]: 282
- Brake Disc Thickness [mm]: 12
- Height [mm]: 49
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ohne ABE
- Minimum thickness [mm]: 10
- Weight [kg]: 4.6
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1ZF,
1ZM, 1ZC - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 280
- Brake Disc Thickness [mm]: 22
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: KBA 60872
- Minimum thickness [mm]: 19
- Weight [kg]: 5.92
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Tagasild
- PR-numbri jaoks: 1KS
- Kogus pakendis: 2
-
Brake Disc Type: solid,
Perforated - Surface: Coated
- Outer Diameter [mm]: 272
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 8
- Weight [kg]: 3.9
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LP,
1LL - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
-
Brake Disc Type: internally vented,
Perforated -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- Test Mark: KBA 60872
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LL,
1ZB, 1LP - Kogus pakendis: 2
-
Brake Disc Type: perforated/
vented - Brake Disc Thickness [mm]: 25
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 50
- Centering Diameter [mm]: 65
- Outer Diameter [mm]: 312
-
Machining: High-
carbon - Surface: Coated
- Minimum thickness [mm]: 22.8
- Tightening Torque [Nm]: 120
- Technical Information: ECE R 90 Homologation.
- Tootja: BREMBO
- Nimetus: BR 09.9772.1X
- Kvaliteediklass: Q
General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
- Installatsiooni pool: Esisild
- PR-numbri jaoks: 1ZE
- Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 288
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 7.35
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
- Installatsiooni pool: Esisild
-
PR-numbri jaoks: 1LP,
1LL - Kogus pakendis: 2
-
Brake Disc Type: internally vented,
slotted -
Machining: High-
carbon - Surface: Coated
- Outer Diameter [mm]: 312
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 65
- directional:
- Test Mark: ECE R90 APPROVED
- Minimum thickness [mm]: 22
- Weight [kg]: 8.3
-
Hole Arrangement/Number: 10/
5 - Tootja: ZIMMERMANN
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog