• Kogus pakendis: 25
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Materjal: Metall
• Kuju: C-kuju
• Tootja: ELRING
• Lisainfo: 591.840 ELR

• Mootorikood: CZDA, CZEA, CHPB
• Väliskeere [mm]: M14x1,5
• Pikkus (mm): 16
• Lisainfo: PAKENDIS 10 tk

• Pikkus (mm): 23,8
• Väliskeerme mõõde: M14 x 1,5
• Kvaliteet/klass: 5.8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 16
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Hooldusinfot jälgida:

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5

• Mootorikood: CZDA
• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• DIN/ISO: 7603
• Materjal: Vask
• Kuju: A-kuju
• Kaal (kg): 0,001
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: FEB
• Lisainfo: 04054 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 25
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Materjal: Vask
• Kuju: C-kuju
• DIN/ISO: 7603
• alternatiivne remondikomplekt: 017.736, 036.400, 505.550, 505.540
• Tootja: ELRING
• Lisainfo: 813.036 ELR

• Kogus pakendis: 25
• Jämedus/Tugevus (mm): 2
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 21
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Materjal: Vask
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 21
• Jämedus/Tugevus (mm): 2
• Kuju: C-kuju
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: CZDA, CZEA
• Käigukasti liik: automaatkast 6 käiku
• PR-numbri jaoks: G1A
• Kogus pakendis: 10
• Siseläbimõõt [mm]: 11,7
• Välisläbimõõt [mm]: 16,5
• Jämedus/Tugevus (mm): 2,2
• Materjal: Raudplekk
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kogus pakendis: 5
• Pikkus (mm): 23,8
• Väliskeere [mm]: M14 x 1,5
• Materjal: Metall
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Keerme samm (mm): 1,5
• Installatsiooni pool: mootoripoolne
• Keermemõõt: M14 x 1,5
• vajaminev tükihulk: 1
• Võtmekaugus: 19
• Keermepikkus (mm): 17,5
• Pealispind: fosfeeritud
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: CZEA, CZDA
• Keermemõõt: M14x1,5
• Pikkus (mm): 17
• lisaks vajatav toode (tootekood): 259.150.100
• Võtmekaugus: 19 mm
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FIS

• Kogus pakendis: 10
• Kruvide-/Mutrite teostus: koos kinnise seibiga
• Keermemõõt: M 14
• Keermepikkus (mm): 22
• Keerme samm (mm): 1,5
• pikkus üle kõige (mm): 30
• Materjal: Metall
• Pealispind: Tsink-nikkliga kaetud
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 19
• Nimetus: Sulgurkruvi, olivann
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kogus pakendis: 20
• Pikkus (mm): 22
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: CHPB, CZDA, CZEA
• Kogus pakendis: 4
• Kruvipikkus kruvipea all [mm]: 16
• Pikkus (mm): 23,8
• Kaal (kg): 0,031
• Keermemõõt: M14 x 150
• Materjal: Metall
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: METALCAUCHO

• soovitava lisavarustuse artiklinumber: 104 474
• Keermemõõt: M 14
• Keerme samm (mm): 1,5
• pikkus üle kõige (mm): 23,5
• Keermepikkus (mm): 16
• Tugevusklass: 5.8
• Materjal: Metall
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: CZEA, CZDA
• Keermemõõt: M14x1,5
• Pikkus (mm): 17
• Võtmekaugus: 19 mm
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: —RUBA SPUSTU OLEJU M14X1.5 L=17 Z USZCZELK¤
• Tootja: FIS

• Pikkus (mm): 24
• Väliskeerme mõõde: M14 x 1,5
• Kvaliteet/klass: 5.8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 16
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB
• Lisainfo: 03272 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 2
• Siseläbimõõt [mm]: 14,4
• Välisläbimõõt [mm]: 19,8
• DIN/ISO: 7603
• Materjal: Metall
• Kaal (kg): 0,005
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZDA, CZEA
• Pikkus (mm): 24
• Siseläbimõõt [mm]: 14,4
• Välisläbimõõt [mm]: 20
• Väliskeerme mõõde: M14 x 1,5
• Kvaliteet/klass: 5.8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 16
• Kaal (kg): 0,033
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Hooldusinfot jälgida:
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kaal (kg): 0,01
• Keermemõõt: M10x1
• pakendi pikkus [cm]: 1,4
• pakendi laius [cm]: 1,3
• pakendi kõrgus [cm]: 1,3
• Tootja: FEBEST

• Pikkus (mm): 24
• Väliskeerme mõõde: M14 x 1,5
• Kvaliteet/klass: 5.8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: fosfeeritud
• Kruvipikkus kruvipea all [mm]: 16
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZDA, CZEA
• Pikkus (mm): 24
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Väliskeerme mõõde: M14 x 1,5
• Kvaliteet/klass: 5.8
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Pealispind: tsingitud, fosfeeritud
• Kruvipikkus kruvipea all [mm]: 16
• Kaal (kg): 0,32
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: BLP

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZEA, CZDA
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Nimetus: —RUBA SPUSTU OLEJU AUDI A4 1.6 04-
• Tootja: DRM

• Mudeliaasta alates: 2017
• Installatsiooni pool: Esisild, Õlivann
• Kogus pakendis: 5
• Kruvipea-/Mutriprofiil: sisekuuskant
• Keermepikkus (mm): 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Keerme samm (mm): 1
• Keermemõõt: M10
• Tootja: VAICO

Kastitüüp: SFX, SYL, SKX, SWQ,, TCY, UAQ, SKY, SWR,, TCZ, UAT, PGS, SEA,, SRD, SRE, UHA Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: CZDA
• Pikkus (mm): 15
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• DIN/ISO: 908
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,011
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Nimetus: SULGURKRUVI
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZEA, CZDA
• Materjal: Metall
• Keermemõõt: M14x1,5
• Pikkus (mm): 24
• Kruvipikkus kruvipea all [mm]: 16
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 19
• Materjal tihend: Vask
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 1,5
• Konteineri tüüp: Kott
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: METZGER

• Nimetus: USZCZELKA —RUBY SPUSTU OLEJU 14X20X2 MIEDZ. 5SZT.
• Tootja: DRM

• Kaal (kg): 0,049
• Keermemõõt: M24x1,5
• pakendi pikkus [cm]: 2,9
• pakendi laius [cm]: 2,9
• pakendi kõrgus [cm]: 1,7
• Tootja: FEBEST

• Mootorikood: CZDA
• Kogus pakendis: 5
• Väliskeere [mm]: M14 x 1,5
• vajaminev tükihulk: 1
• Kruvipea-/Mutriprofiil: sisekuuskant
• Keerme samm (mm): 1,5
• OE-numbri jaoks: N 016 027 6
• Installatsiooni pool: mootoripoolne
• Keermemõõt: M14 x 1,5
• Kruvide-/Mutrite teostus: Lamepea
• Materjal: Metall
• Keermepikkus (mm): 12
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: CZDA, CZEA
• Kogus pakendis: 25
• Pikkus (mm): 15
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 9
• Kvaliteet/klass: 4.8
• Võtmekaugus: T45
• Kruvipea-/Mutriprofiil: sise-Torx
• Materjal: Metall
• Pealispind: Tsink-nikkliga kaetud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,022
• Nimetus: Sulgurkruvi, olivann
• Tootja: FEB
• Lisainfo: FE103349

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZDA, CZEA
• Pikkus (mm): 15
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 9
• Kvaliteet/klass: 4.8
• Võtmekaugus: T45
• Kruvipea-/Mutriprofiil: sise-Torx
• Materjal: Metall
• Pealispind: Tsink-nikkliga kaetud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,022
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB
• Lisainfo: FE103344

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: CZDA
• Kogus pakendis: 20
• Väliskeere [mm]: M14 x 1,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pikkus (mm): 29,5
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Pealispind: Tsink-nikkliga kaetud
• Kruvide-/Mutrite teostus: koos kinnise seibiga
• Keermepikkus (mm): 22
• vajaminev tükihulk: 1
• Materjal: Metall
• Keerme samm (mm): 1,5
• OE-numbri jaoks: N 908 132 02
• Installatsiooni pool: mootoripoolne
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: CZDA, CZEA
• Pikkus (mm): 15,3
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 9
• Kvaliteet/klass: 4.8
• Võtmekaugus: T45
• Kruvipea-/Mutriprofiil: sise-Torx
• Materjal: Metall
• Pealispind: Tsink-nikkliga kaetud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,022
• Nimetus: SW 30 10 3344
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 10
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Kuju: C-kuju
• Materjal: Vask
• valikuliselt:
• Nimetus: Rongastihend
• Tootja: FIS

• Kaal (kg): 0,034
• Keermemõõt: M22x1,5
• pakendi pikkus [cm]: 2,7
• pakendi laius [cm]: 2,7
• pakendi kõrgus [cm]: 1,8
• Tootja: FEBEST

• Kogus pakendis: 100
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Kuju: C-kuju
• Materjal: Vask
• Nimetus: Rongastihend
• Tootja: FIS

• Mootorikood: CZEA, CZDA
• Kogus pakendis: 100
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Kuju: C-kuju
• Materjal: Metall

• Mootorikood: CZEA, CZDA
• Kogus pakendis: 10
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Kuju: C-kuju
• valikuliselt:
• Materjal: Metall